Assessments - 3, GPA: 3.7
(
)
)
|
Facilidade de uso
If the unit is not to be used for a prolonged period, remove the battery to avoid battery leakage. In the interests of environmental safety : dispose of batteries safely. 1 2 3 13 5 74 15 17 6 14 12 11 1098 Location of controls 1 Alarm 1 button 9 Dial scale with pointer 2 Alarm 2 button 10 Alarm 2 indicator 3 Snooze button 11 Alarm 1 indicator 4 Alarm off / time set button 12 PM indicator 5 Slow button 13 Volume / buzzer control 6 Band switch 14 Function switch 7 Tuning control 15 Sleep button 8 Fast button 16 Alarm switch 17 LED clock display P.2 Switching on, and setting the clock time Before any alarm functions can be used on your alarm clock radio you must first set the clock to the correct time. 1 Place the unit on a flat surface. Plug the mains plug into the wall socket and switch on the wall socket. 2 The clock LED display (17) will flash. 3 Press and hold the TIME SET button (4) and simultaneously hold down the fast button (8) or the slow button (5). The LED clock display (17) will fast forward the minutes and hour segments. Release all buttons when the correct time is set. 4 The PM indicator (12) will illuminate to indicate 12.00 midday has been reached. Radio operation FM wire aerial To obtain the maximum FM reception fully extend the wire FM aerial (which is located at the rear of the unit) and alter the direction of the wire for best results. The aerial for the MW waveband is located inside the unit. To obtain the maximum MW reception rotate the clock radio. 1 Slide the FUNCTION switch (14) to the ‘ON’ position. 2 Adjust the VOLUME control (13) to a suitable level. 3 Set the BAND switch (6) to either MW or FM as desired. 4 Slowly adjust the TUNING control (7) to select your desired station. 5 To switch off the radio, slide the FUNCTION switch (14) to the ‘OFF’ position. P.3 P.4 Setting the alarm time Alarm 1 1 Press and hold the ALARM 1 button (1). 2 Press the FAST button (8) to advance the setting quickly. When nearing the desired time, release the FAST button. 3 Press the slow button (5) to advance the setting slowly to the desired time. 4 Release the the ALARM 1 button. 5 Set the FUNCTION switch to ‘AUTO’. Alarm 2 1 Follow the procedure above for setting alarm 1 using the alarm 2 button instead. Setting the alarm 1 Set the alarm time as detailed above. 2 Set the ALARM switch (16) to ALARM 1, ALARM 2 or ALARM 1 + 2 to activate the appropriate alarm. • In alarm 1 and 2 both settings are activated. Wake to buzzer 1 Slide the VOLUME control / BUZZER (13) to the ‘BUZZER’ position. • The dial will click when the buzzer position is reached. To wake to radio 1 Slide the FUNCTION switch (14) to the ‘ON’ position. 2 Slide the BAND switch (6) to MW or FM. 3 Use the tuning control (7) to select desired station. 4 Adjust the VOLUME control (13) to the desired level. 5 Slide the FUNCTION switch (14) to the ‘AUTO’ position. • The appropriate alarm indicator will illuminate on the led display. Note: The alarm or radio will sound and will continue for 2 hours past the alarm setting. P.5 Maintenance Do not expose your clock radio to extremes of temperature. The product should be kept in a warm environment free from dust and damp. For external cleaning use only a soft, clean, damp cloth. Use of detergents may damage the finish. Technical specification AC Power supply : 230v 50Hz Battery back-up : 9V DC type 6LR61/PP3 (not included) Radio : FM 88Mhz - 108MHz : MW 530Khz - 1600kHz Warning labels WARNING: to reduce the risk of electric shock, do not expose this appliance to rain or moisture. ATTENTION: To reduce the risk of electric shock, do not remove the cover. There are no user serviceable parts inside the unit. Refer any servicing to qualified personnel. The lightning flash with arrowhead symbol within the triangle is a warning sign alerting the user of ‘dangerous voltage’ inside the unit. The exclamation point within the triangle is a warning sign alerting the user of important instructions accompanying the product. To prevent fire or shock hazard do not expose this apparatus to dripping or splashing. To stop the alarm 1 Press the SNOOZE button (3) to silence the alarm for approximately 7 minutes. (When pressing and holding the snooze button the clock display will show the last digit of the minute and running second of current time. 2 Slide the FUNCTION switch (14) to the ‘OFF’ position or press the TIME SET / ALARM OFF button (4) to cancel the alarm. Snooze function The alarm can be interrupted for a 7 minute period. 1 Press the SNOOZE button (3), after 7 minutes the radio or alarm buzzer will sound again. To set the sleep function Your clock radio is equipped with a sleep function that will turn the radio on and switch it off automatically after a set period of time from between 1 minute to 59 minutes. 1 Make sure the FUNCTION switch is set to ‘OFF’ or ‘AUTO’ position, otherwise the clock radio will not turn off after the sleep period ends. 59 minute sleep timer 1 Press the sleep button (15) to have the ra...