Assessments - 3, GPA: 3.7
(
)
)
|
Facilidade de uso
Your units is now set to turn on automatically at the pre-selected alarm time. TO WAKE TO BUZZER Step 1 Follow step 1 to step 3 under "TO WAKE TO RADIO". Step 2 Rotate the VOLUME/BUZZER switch to the "BUZZER" position. You will be awakened at the pre-selected alarm time by the buzzer tone. To turn the Buzzer off, slide the AUTO/OFF/ON switch to the "OFF" position or press ALARM SET/OFF Button. ALARM OFF Slide the AUTO/OFF/ON switch to "OFF" position if you wish to turn off the radio or buzzer after the radio or buzzer has sounded in the Wake to Radio or Wake to Buzzer operation. The alarm will not sound again until the next day unless you switch back to "AUTO" position or use alarm button to shut off alarm, then the radio or buzzer will automatically sound again in 24 hours at the same alarm setting. SLEEP CONTROL Step 1 Turn the AUTO/OFF/ON switch on the "AUTO” or "OFF' position. Step 2 Press the SLEEP button to display the sleep time. The display will indicate 59 minutes. If you wish the radio to play for a shorter period simply press the SLEEP button together with the MINUTE button to set the desired time period, or if you wish to play longer, press SLEEP button along with HOUR button top play for 1 hour and 5 minutes (MAX). Step 3 Press the SLEEP button. The radio will turn on automatically and will turn itself off when the pre-set time has passed. NOTE: The maximum sleep time is 1 hour and 59 minutes. The radio will be switched off automatically when the sleep time expires. To turn the radio off before expiration of sleeping time, simply press the "SNOOZE BUTTON". BATTERY BACK-UP Your clock has a battery back up feature in case of power failure. A 9 volt battery (not included) is required. You must put in a battery to ensure the battery back up feature is ready in case of power failure. If power fails, the back up battery will automatically continue operation of the clock and maintain actual time. However, the display will not be lighted. During actual power failure the alarm function will not be operational. When electrical power is restored, the display will light up again and alarm time set previously is restored. The battery will maintain timekeeping for approximately 8 hours during power failure or interruption. NOTE: Remove the battery if the clock is to be unplugged for a long time avoid unnecessary battery drain. POWER SOURCE Plug the AC line cord into AC120V/60Hz power outlet. The unit is now working and the display figures will blink to show you it is operating, but not yet set. OPERATING INSTRUCTIONS 1. AUTO/OFF/ON/SWITCH... slide the switch to turn radio "ON", "OFF" or to "AUTO" position. When the switch is in the "AUTO" position, it will permit automatic turning "ON" and "OFF" of the radio according to the sleep and alarm settings. 2. TIME SET BUTTON... press this button simultaneously with the HOUR or MINUTE button to set the desired time. 3. ALARM SET BUTTON... Press this button simultaneously with the HOPUR or MINUTE button to set the desired wakeup time. 4. SLEEP SET BUTTON... Press this button to display the number of minutes (59 or less) where the radio will sound for 59 minutes and will automatically turn off after then. 5. HOUR AND MINUTE button... Use these buttons to set the time, while pressing the Alarm set button or Sleep button. 6. AM/FM band selector... Slide this selector to either AM or FM to select the desired radio band. 7. VOLUME KNOB CONTROL... To regulate the loudness of the radio, rotate the CONTROL clockwise to desired position. If you wish to be aw3akened preset time by the "Buzzer" rotate the CONTROL counter-clockwise until a "click" sound is heard. 8. TUNING KNOB... Turn this knob to the desired radio station. 9. SNOOZE BUTTON... When you are awakened by music or buzzer but wish to sleep a few to sleep a few minutes more, simply touch the "snooze" button and it will shut off the music or buzzer for approximately 5 to 10 minutes before the music or buzzer sounds again. This can be repeated several times. TO SET THE TIME Step 1 Press the Time set button together with the HOUR or MINUTE button to set the correct time. Note: Repeat the above steps if you run past the correct time. A glowing dot appears in the lower left hand corner of the display, indicating that the time shown is PM time. TO SET THE ALARM Step 1 Press the Alarm set button to check the alarm time. Step 2 Press the Alarm set button together with the HOUR or MINUTE button to adjust the alarm time, paying close attention on the PM indicator. NOTE: A glowing dot appears in the lower left hand corner of the display indicating that the alarm has been set to operate. TO PLAY THE RADIO Step 1 Slide the AUTO/OFF/ON switch to the "ON" position. Step 2 Slide AM/FM band switch to desired band. Step 3 Select the desired radio station by turning the Tuning knob Step 4 Adjust the Volume to the desired listening level. SAFETY INSTRUCTIONS THESE IMPORTANT SAFETY INSTRUCTIONS A...