Log:
Assessments - 1, GPA: 4 ( )

Instruções de Operação Venturer, Modelo VENTURER IP873

Fabricante : Venturer
Arquivo Tamanho: 375.99 kb
Arquivo Nome : iP873_Venturer.pdf
Língua de Ensino: en
Ir para baixar



Facilidade de uso


NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada. Warnings: • To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. • The AC adapter is used as disconnect device and it should remain readily operable during intended used. In order to disconnect the apparatus from the mains completely, the AC adapter should be disconnected from the mains socket outlet completely. • Minimum 10 cm (4 inches) distances around the apparatus for sufficient ventilation. • Batteries shall not be exposed to excessive heat such as sunshine, fire or the like. • The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-cloths, curtains, etc. • No naked flame sources such as lighted candles should be placed on the apparatus. • The apparatus and AC adapter shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus and AC adapter. On Operation Do not turn up the volume while listening to your iPod with no audio signals or very low level inputs. If you do so, the speakers may be damaged when the peak level of the sound is played. On Use Never use the unit where it would be subject to: - Heat sources such as radiators or air ducts. - Direct sunlight. - Excessive dust. - Moisture or rain. - Mechanical vibration or shock. - Uneven surface. • Do not place any heavy objects on top of the unit. • When the unit is used with an AC power adapter, do not wrap the unit in a cloth, blanket, etc.. If you do so, the temperature inside and outside the unit may rise considerably, resulting in malfunctioning of the unit. • If the unit is brought directly from a cold to a warm location, or is placed in a very damp room, the moisture may condense on the lens inside the unit. Should this occur, the unit will not operate. In this case, remove the disc and leave the unit in a warm place for several hours until the moisture evaporates. • For the unit to operate at its best, it should not be subject to temperatures below 41°F (5°C) or above 95°F (35°C). clock setting Safety Precautions Clock Radio for iPhone and iPod Model No.: iP873 User’s Guide POWER SUPPLY CAUTIONS: • Before use, make sure the rated voltage of the adapter matches your local voltage. • If you are not going to use the unit for a long time, disconnect the AC adapter from the wall outlet. • Whenever the AC adapter is plugged in to a wall outlet, electricity is running through the unit, even when the power button on the unit is turned off. Power Back-Up During Power Interruption Before inserting batteries, you need to plug the AC adapter in to a wall outlet. Open the battery door at the bottom of the unit and insert two “AA size” batteries into the battery compartment. We recommend you install two “AA size” batteries (not included) for the power back-up function. If the AC power supply is interrupted, the batteries supply power to keep the clock operating and the alarm times set. • During power interruption, the clock function is still maintained. The alarm sound will not come on. • These batteries are for clock operation and alarm memory during power interruption. You can not listen to the radio/iPod using battery power. When to Replace the Batteries To check the batteries’ condition, unplug the AC adapter from the wall outlet and plug it in again after a few minutes. If the displayed time is incorrect, replace the batteries with new ones. WARNINGS: • Danger of explosion if batteries are incorrectly replaced. Replace only with the same or equivalent type. • Be sure to install the batteries before unplugging the AC ada...


Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias