Log:
Assessments - 3, GPA: 4.3 ( )

Instruções de Operação Fisher-Price, Modelo N9326

Fabricante : Fisher-Price
Arquivo Tamanho: 588.95 kb
Arquivo Nome : N9326a-0920.pdf
Língua de Ensino: en
Ir para baixar



Facilidade de uso


CAUTION This product cannot replace responsible adult supervision. 2 Important! • For proper setup and use, please read these instructions. • Please keep this instruction sheet for future reference, as it contains important information. • Transmitter operates on AC current. Receiver operates on AC current (use enclosed AC adaptor) or 3.6V NiMH rechargeable battery pack (included). • Before first time use, charge the rechargeable battery pack for four hours. • Adult assembly is required for wall mounting. Tools needed for assembly: electric drill, ." drill bit, hammer, Phillips screwdriver (tools not included). • This product is not intended to be used as a medical monitor and its use should not replace adult supervision. • Test sound/audio reception of receiver before first-time use and whenever you change location of the transmitter. • Adults Note: Periodically examine this product for damage to the cord, housing or other parts that may result in the risk of fire, electric shock or injury. If the product is damaged, do not use it. • Never use extension cords with the AC adaptor. • Never use transmitter or receiver near water (i.e. bathtub, sink, wet basement, etc.). • Always use transmitter and receiver where there is adequate ventilation. To prevent overheating, keep away from heat sources such as radiators, heat registers, direct sunlight, stoves, amplifiers, fire, excessive heat or other appliances that produce heat. • Fisher-Price® does not recommend the use of two monitors in one house. • Always remember that you are using public airwaves when using your monitor. Conversations, even from rooms near your transmitter, may broadcast to other nursery monitors, radios, cordless telephones or scanners outside your home. To protect the privacy of your home, always turn off the transmitter when not in use. • Do not connect to more than the recommended number of power supplies. • The AC adaptor is not a toy. • Disconnect the AC adaptor from the receiver before cleaning. • If this product begins to operate erratically, you may need to reset the electronics. Turn the transmitter power/volume dial off and then back on; press the receiver main power/menu button to turn power off and press again to turn power back on. • Carrier Frequency: 2.4 Ghz • Product features and decoration may vary from photos. 3 Features 9 10 12 11 4 14 Receiver Transmitter 6 1 4 7 3 13 2 5 8 AC Adaptor/Charger Transmitter Tabletop Stand 4 Features Main Power/Menu Button – Press to turn receiver main power ON; press again for the main menu; press and hold for approximately five seconds to turn main power OFF. Power L.E.D. – Turns on when receiver power is ON. Menu Navigation/Volume Control Button – Press up, down or side arrows to scroll through menu options. When the menu is not on the screen, press the side arrows to adjust volume. Speaker Video Screen Video Screen On/Off Button – Press to turn the video screen on; press again to turn it off. Sound Lights – Shows you baby's sounds. DC Input Jack – Insert the AC adaptor/charger pin to use AC power/charge the battery. Camera Lens 12345678910 Power/Volume Dial – Rotate to turn transmitter power ON and adjust volume to a comfortable level for baby. 11 Microphone 12 Music, Sounds and Night Light Buttons Music – Choose from 5 lullaby songs. Sounds – Play nature sounds. Night Light – Turn on night light for baby. 13 Power L.E.D. – Turns on when transmitter power is ON. 14 Night Light – Lights room with a soft glow. 5 Wall Mount Parts Wall Mount Bracket Cord Wrap Base Stand Fasteners Shown Actual Size Wall Anchor – 4 #8 x 2" Screw – 4 6 DC Input Jack DC Input Jack Charging the Battery (Inside the Receiver) IMPORTANT! Fully charge the receiver (with battery pack inside) for four hours before first-time use. Use only the included AC adaptor charger! Do not use any other adaptor charger. • Fit the AC adaptor charger pin into the DC input jack on the receiver. • Plug the AC adaptor charger into a standard wall outlet. Notes: If power flow to the wall outlet is controlled by a switch, make sure the switch is “ON”. Use the AC adaptor charger only in a wall outlet. Do not plug the AC adaptor charger into a ceiling outlet. To connect to a supply that is not in the United States, use an adaptor (not included and sold separately) with the proper configuration for the power outlet. • If you are monitoring baby while charging the battery pack, you will see the charging icon on the video screen. 7 Testing Sound/Video Reception Test transmitter transmission and receiver reception before installing the wall mount bracket and cord wrap (if used) and each time you change location of use. Power Dial Radio • Place the transmitter in the room where you intend to use it. • Point the transmitter toward the area you will be monitoring. Adjust the camera angle by rotating the top portion of the transmitter up or down. • Turn the power/volume dial ON. • Turn on a radio. 8 Testing Sound/Video Reception Sound Lights Main P...


Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias