2 screw driver • KCT-22 Remote Control Cable Note: ♦ When connecting the KCH-16 to the Interface box, do not connect the MIC to the programming connector of the Interface box. ♦ The programming connector of the interface box is dedicated to programming. ♦ The control connector of the interface box is dedicated to the KCH-16; do not use this connector for other equipment. ♦ The optional jack is supplied for future expansion. It cannot be used at this time. ♦ Do not remove the covers or cap

2) Using the DTMF keypad Press the keypad keys to enter characters as shown in the table below: DTMF Key Character Cycle 1 1 2 A B C 2 3 D E F 3 4 G H I 4 5 J K L 5 6 M N O 6 7 P Q R S 7 8 T U V 8 9 W X Y Z 9 0 [space] 0 15 SCAN Scan monitors for signals on the transceiver channels. While scanning, the transceiver checks for a signal on each channel and only stops if a signal is present. To begin scanning, press the key programmed as Scan. • The icon appears on the display. • When a signal is de

Solicite a su proveedor información sobre las funciones personalizadas que se puedan añadir a su radio. Avisos al usuario ♦ La ley gubernamental prohíbe la operación de radiotransmisores no autorizados dentro de los territorios que se encuentren bajo el control del gobierno. ♦ La operación ilegal se castigará con multa y/o encarcelamiento. ♦ Solicite la reparación solamente a un técnico cualificado. Seguridad: Es importante que el operador conozca y entienda los peligros comunes derivados d

• The VOX Gain can be adjusted from levels 1 to 10. 4 While adjusting the level, speak into the headset microphone to test the sensitivity level. (Your voice is not trasmitted during this test procedure.) • When sound is recognized, the LED lights orange. 5 Press to save the setting. 25 ¦ VOX Operation 1 Connect the headset to the transceiver. 2 Press and hold the key programmed as VOX for 2 seconds. 3 To transmit, simply speak into the microphone. • The transceiver recognizes sound levels depen

When pressing the / keys, the displayed character entry cycles through A ~ Z, 0 ~ 9 and a space (default settings). You can also assign a character to an optional key and later press that key to recall the assigned character: A ~ Z, a ~ z, 0 ~ 9, or a space and characters. When using the microphone keypad, you can enter characters as shown in the table below: DTMF Key Default Character Cycle 1 1 2 A > B > C > 2 3 D > E > F > 3 4 G > H > I > 4 5 J > K > L > 5 6 M > N > O > 6 7 P > Q > R > S > 7 8

Creemos que este transceptor de fácil manejo le permitirá realizar comunicaciones seguras para mantener a su personal trabajando con la mayor eficiencia posible. Kenwood incorporan lo último en tecnología avanzada. Estamos seguros, por tanto, de que usted quedará plenamente satisfecho de la calidad y las características de este producto. Avisos al usuario ♦ La ley gubernamental prohíbe la operación de transmisores no autorizados dentro de los territorios que se encuentren bajo el control del

FleetSync enables a variety of paging functions on your transceiver, some of which depend on dealer programming. Your dealer can set up either FleetSync or FleetSync II on your transceiver. Transceivers set up with FleetSync can communicate with other transceivers that have been set up with FleetSync. Likewise, transceivers set up with FleetSync II can communicate with other transceivers set up with FleetSync II. However, transceivers set up with FleetSync cannot communicate with transceivers th

Appears while transmitting. Appears while using the External data band. Appears while using the Internal data band. Appears when the data terminal is set as 9600 bps. Appears when mute function is ON. Appears while making a continuous recording. Appears while in EchoLink Sysop mode. Appears when the Key Lock function is ON. Displays the PM channel number. Appears when Weather Alert is ON. Blinks when receiving a signal. (with TM-V71(A) K type only) Appears when a message is received. Appears whe