Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
The cordless phone won’t work if the base unit has no electrical power. Move the handset closer to the base unit. Check the Battery Level symbol on the display. If it is low, replace the cordless handset on the charger pod to recharge the batteries. If you still can’t make calls, try re-registering the handset. “When I press Make sure the batteries are fitted in your handset. If the Battery keys on the Level symbol on the display shows ‘low’, recharge the batteries. handset, nothing happens.” Press and hold the OK button until the handset comes to life. The OK button switches the handset on and off. Check whether there’s a ‘key’ symbol on the display. If so, the keypad is locked. Turn to Section 8 to find out how to unlock it. “When I press Call barring may have been set. See Section 7 for more keys on the information. handset, digits appear on the Try moving the handset closer to the base unit. display, but I can’t make an outside call.” Try a different position for the base unit — perhaps higher, or further from other electrical equipment. 21 “The cordless Check that the base unit’s mains power adapter is plugged in phone does and power is switched on. The cordless phone won’t work if the not ring” base unit has no electrical power. Check that you have not set the ringer volume to Off. See Section 6 for more information. “My call was cut Move the cordless handset closer to the base unit before you try off when I went again to make a call. out of range. Now I can’t use my handset.” “There is inter-Move the cordless handset closer to the base unit, or to a ference, noise or different position. echoing on the Try moving the base unit so that it’s not near other electrical line.” equipment, such as a TV or a computer. You’ll get the best results if you site the base unit as high as possible. For example, in a two-storey house, the first-floor landing is an ideal place for the base unit. “When I press the The strange noise is caused by interference. Disconnect the mains PHONE or power lead from the back of the base unit, then wait 30 seconds SPEAKERPHONE before reconnecting it. button, I hear a loud noise.” “I hear ‘beeps’ You may be going out of range of the base unit. Move closer, or from my handset your call may be cut off. while I’m on a Check the Battery Level symbol on the display. If it shows ‘low’, call.” recharge the batteries. “The volume in Make sure you’re holding the earpiece correctly over your ear. the earpiece is Adjust the volume as decribed in Section 6. low.” “When I try to Check your handset’s display — if it says either notsub or make a call, I hear base.... , you need to re-register the handset. Busy tone and If the display says search1 , make sure the mains power lead the IN USE light is plugged into the back of the base unit, and the adapter is on the base unit plugged into the mains socket with the power switched on. does not come on.” If you have more than one handset registered to your base unit, check that another handset isn’t already in use on a call. 22 Intercom and transfer “I can’t transfer a Make sure the other cordless handset is within range of the base call.” unit, and is not busy on a call. Make sure you are keying in the correct number (1 to 5) for the other handset. Batteries “The handset‘s Before you first used the handset, you should have left it on the batteries are charger pod for up to 15 hours to charge the batteries fully. running low within an hour or You may need to replace the batteries two.” “The CHARGE Clean the battery charging contacts with a dry cloth. light on the charger pod does not come on.“ Check the connections between the charger pod and the mains power socket.26 “I try to recharge You need to replace the batteries. Please note the following the batteries, but safety warnings: I still get a ¦ Use only NiMH (Nickel metal hydride) 1.2 V AAA warning that they rechargeable batteries in the handset. The best way to make are low.” sure you get the right batteries is to take the old ones w...
Este manual também é adequado para os modelos :Telefones sem fio - Fusion 2510 (245.64 kb)
Telefones sem fio - Fusion 2510 (245.64 kb)
Telefones sem fio - Fusion 2510 (245.64 kb)
Telefones sem fio - Fusion 2510 (245.64 kb)