Assessments - 3, GPA: 3.7
(
)
)
|
Facilidade de uso
Please charge the battery for at least 5.5 hours before using the handset for the first time. When the battery has been completely charged, the charge indicator will change from red to green. For more information, refer to “Battery Information” on page 61. It is normal for the handset and charger to feel warm while the battery is charging. Keep devices sensitive to magnetic fields away from the charger. Use only the included charger. Charger Wall Mounting -É3- 1. Install the two included screws in the wall, spacing them 25 mm (1 in) apart. CD 2. Mount the charger securely on the wall. Make sure that the wall that the charger will be attached to is strong enough to support the weight of the handset and charger (270 g [0.6 lb]). If not, it is necessary for the wall to be reinforced. When this product is no longer in use, make sure to detach it from the wall. 6 Document Version 2008-10 Before Initial Use Attaching the Belt Clip You can attach the handset to your belt by following the steps below. [To attach] [To remove] Allows phone straps and similar objects to be connected. Insert the clip into the designated notches in the handset. Document Version 2008-10 7 Before Operating the Handset Location of Controls The headset is an option. 0. Please use only a Panasonic headset below. KX-T С A86/KX-T CA91 / KX-TCA92 \\ ' L,, S J ml Open the cover. Speaker ©Press POWER for more than 2 seconds. [Power On] Standby mode [Power Off] Blank display Ф Left Up «Äf Down Right You can use the Joystick to move the cursor in the desired direction. Press the center button to confirm a selection. 8 Document Version 2008-10 Before Operating the Handset O Ringer/Charger Indicator 0 Headset Jack 0 TALK/SP-PHONE (Speakerphone) Key Used to make or answer calls, or toggle between the Receiver/Hands-free*1 mode during a conversation. Q HOLD Key Used to place a call on Hold. 0 Meeting Mode Key Used to turn Meeting Mode on or off when pressed for more than 2 seconds in standby mode. For more information, refer to “Meeting Mode" on page 10. 0 Message Key Used to leave a message waiting indication, or to call back the party who left a message waiting indication. 0 Charge Contact 0 Receiver 0 Display Refer to “Display” on page 15. flt) Left/Right Soft Key Used to select the function displayed directly above each key. Functions are displayed based on the current context. ф POWER/CANCEL Key Used to end calls, exit the Phonebook or Function mode, or turn the handset on or off. ф Joystick Used to adjust the ringer/receiver volume, select Function menus and the function displayed directly above it, and to move the cursor to select a desired item. ф TRANSFER/CLEAR Key Used to transfer a call to another party, or to clear digits or characters. ф INTERCOM Key Used to make or answer intercom calls. ф Microphone *1 You can talk with the other party alternately through the speaker in a quiet room. During a conversation using a headset, Hands-free mode does not work. Key Lock You can lock all keys other than the Joystick while the handset is in standby mode. [Display Icon] Unlocked Locked Press the Joystick for more than 2 seconds to lock/unlock. Document Version 2008-10 9 Before Operating the Handset Meeting Mode Meeting Mode allows you to turn off the ringer and set the handset to vibrate when calls are received. This can be useful in situations where you do not want to be disturbed, such as during a meeting. When Meeting Mode is active, the microphone’s sensitivity is increased, and the following features are turned off automatically, regardless of their settings. - Ringer Volume - Ring On Charger - Auto Answer - Key Tone - Range Alarm - Low Battery Alarm • If you set the handset on the charger during Meeting Mode, the handset will not vibrate*1. *1 Please note that if you set the handset on the charger while receiving an incoming call, vibration will stop. Once the vibration stops, the handset will not vibrate again for that call, even if the handset is lifted up again. (If Quick Answer is set, lifting up the handset will answer the call.) 10 Document Version 2008-10 Before Operating the Handset Selecting the Display Language You can select the desired language (English/Spanish/French). /tt C29 At 133 ^ ► ~g~ ►► Press the Joy- Select “171 Set- Press the Joy- Select “Dis- Press the Joystick. ting Handset". Stick. play Option", stick. CP Jk €39 ►► Ä - ^ ^ (p; ^ ;y: Select “Lan- Press the Joy- Select the desired language. Press the Joy- guage”. Stick. (Auto/English/Espanol/ Stick. FRANÇAIS) When set to “Auto”, the language settings of the PBX will be used. The display language of both the handset and PBX can be selected, and both should be set to the same language. For more information, refer to the user documentation for your PBX. Editing the Standby Display Name You can edit the name of the standby mode display of the handset. €11 At -g- ► ► -g-...