Assessments - 3, GPA: 5
(
)
)
|
Facilidade de uso
RECHARGE Battery replacement: If you cleaned the charge contacts and fully charged the battery, but after a few telephone calls, the RECHARGE indicator flashes, the battery needs to be replaced. Please order a new Panasonic HHR-P513 (N4HHEPA00001) battery at the telephone number shown on section 1-A. To replace the battery, see section 1-C, step 2. A nickel metal hydride battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery. Battery information After your Panasonic battery is fully charged: Operation Operating time While in use (TALK) Up to about 5 hours While not in use (Standby) Up to about 11 days .The battery operating time may vary depending on usage conditions and ambient temperature. .Clean the charge contacts of the handset and the base unit with a soft, dry cloth once a month. Clean more often if the unit is subject to grease, dust or high humidity. Otherwise the battery may not charge properly. .If the battery is fully charged, you do not have to place the handset on the base unit until the RECHARGE indicator flashes. This will maximize the battery life. .The battery cannot be overcharged. 4-B Belt Clip You can hang the handset on your belt or pocket using the included belt clip. To attach the belt clip To remove the belt clip For assistance, please call: 1-800-211-PANA(7262) Things You Should Know “ For assistance, please call: 1-800-211-PANA(7262) 4-D Optional Headset Connecting an optional headset to the handset allows hands-free phone conversation. Use only a Panasonic KX-TCA60, KX-TCA86, KX-TCA88, KX-TCA91, KX-TCA92, or KX-TCA98 headset. To order, call the accessories telephone number on section 1-A. Connecting an optional headset to the handset Open the headset jack cover, and insert the headset plug into the headset jack as shown below. To switch to the speakerphone while using the headset: Press [SP-PHONE]. To return to the headset, press [ ]. .Headset sold separately. Model shown here is KX-TCA88. Headset Jack 4-C Shoulder Rest Attachment Use the shoulder rest attachment if you need to keep your hands free during a phone conversation. To attach the shoulder rest attachment Attach the included belt clip to the handset (4-B), then attach the shoulder rest attachment to the belt clip as shown below. You will hear a click when the shoulder rest attachment is in place. To remove the shoulder rest attachment Slide the base of the attachment in the direction of the arrow as shown below. 4 Things You Should Know “ 4-E Wall Mounting This unit can be mounted on a wall phone plate. 4 Connect the telephone line cord. Mount the unit, then slide down. .Raise the antenna. 2 Connect the AC adaptor. .Fasten the AC adaptor cord to prevent it from being disconnected. 5 To charge the handset battery: Place the handset on the base unit. .The CHARGE indicator lights and the unit beeps once. 1 Press the tabs in the direction of the arrows (1), then remove the wall mounting adaptor (2). 2 1 1 For assistance, please call: 1-800-211-PANA(7262) 4-G Specifications .Base unit Power Supply: AC Adaptor (120 V AC, 60 Hz) Power Consumption: Standby: Approx. 2.6 W Maximum: Approx. 3.9 W Frequency: 2.402 GHz–2.480 GHz Dimensions (H k W k D): Approx. 104 mm k 148 mm k 173 mm (4 3.32q k 5 27.32q k 6 13.16q) Mass (Weight): Approx. 310 g (0.68 lb.) .Handset Power Supply: Ni-MH battery (2.4 V, 1,500 mAh) Frequency: 2.402 GHz–2.480 GHz Dimensions (H k W k D): Approx. 246 mm k 52 mm k 41 mm (9 11.16q k 2 1.16q k 1 5.8q) Mass (Weight): Approx. 210 g (0.46 lb.) Security Codes: 1,000,000 .Dialing Mode: Tone (DTMF)/Pulse .Operating Environment: 5°C–40°C Specifications are subject to change without notice. Energy Star: .As an ENERGY STARR Partner, Panasonic has determined that this product meets the ENERGY STAR guidelines for energy efficiency. ENERGY STAR is a U.S. registered mark. To Power Outlet Raise the antenna. Calls are transmitted between the base unit and the handset using wireless radio waves. For maximum distance and noise-free operation, the recommended base unit location is: 4-F Base Unit Location In a HIGH and CENTRAL location with no obstructions such as walls. Away from electrical appliances such as a TV, personal computer or another cordless phone. Note: .If you use the handset near a microwave oven which is being used, noise may be heard from the receiver or the speaker. Move away from the microwave oven and closer to the base unit. .If you use the handset near another cordless phone, noise may be heard. Move away from the other cordless phone and closer to your base unit. 2 1 3 Tuck the telephone line cord inside the wall mounting adaptor, then push the adaptor in the direction of the arrows (1 and 2). .The word “UP WALL” should face upward. Hook Things You Should Know Section 4 Things You Should Know Section 4 4-H Troubleshooting Cause & Remedy .If the last number dialed was more than 32 digits long, the number will not be redial...