Assessments - 3, GPA: 5
(
)
)
|
Facilidade de uso
Set tel line KBack dB Select L 4 Scroll to “Set line mode” by pressing [d] or [B], then press Select. Set line mode KBack dB Select L 5 Select “A” or “B” by pressing [d] or [B]. Set line mode :B KBackdB Save L 6 Press Save, then press [OFF]. Auto Talk Handset The Auto Talk feature allows you to answer calls by simply lifting the handset off the base unit or charger. You do not need to press [C] or [s]. The factory preset is OFF. 1 Press [MENU]. 2 Scroll to “Initial setting” by pressing [d] or [B], then press Select. Initial setting KBack dB Select L 3 Scroll to “Auto talk” by pressing [d] or [B], then press Select. Auto talk KBack dB Select L 4 Select “On” or “Off” by pressing [d] or [B]. Auto talk :Off KBack dB Save L 5 Press Save, then press [OFF]. • In order to view Caller ID information after you lift the handset to answer a call, leave the Auto Talk feature turned off. Programmable Settings Ringer Volume Handset You can select the handset ringer volume to high, medium, low, or off. The factory preset is HIGH. If the handset ringer is turned off, the handset will ring at the low level for intercom calls, and will not ring for outside calls. 1 Press [MENU]. 2 Scroll to “Ringer setting” by pressing [d] or [B], then press Select. 3 Press Select at “Ringer volume”. 4 Select the desired volume level by pressing [d] or [B]. • The volume will change and ring. • The number of steps indicates the volume level. • To turn the ringer off, press [d] repeatedly until “Off ?” is displayed. Ringer settingBack Select K dB L Ringer volumeBack Select K dB L Ex. High Ringer volumeLow HighBack SaveK dB L 5 Press Save. • If the handset ringer is turned off, “Ringer off” will be displayed while not in use. If the handset is off the base unit or charger when there are missed calls or new messages in your voice mailbox (p. 41), “Ringer off” is not displayed. • You can adjust the ringer volume while an outside call is ringing. Press [d] or [B] while the handset is ringing. Temporary ringer off While the handset is ringing for an outside call, you can turn the ringer off temporarily by pressing [OFF]. The handset will ring again as normal the next time a call is received. Preparation For assistance, please call: 1-800-211-PANA(7262) 15 Programmable Settings Ringer Tone Handset You can set the handset ringer to use one of 7 ringer patterns for outside calls. “Tone 1” to “Tone 3” are bell ringer patterns. “Melody 1” to “Melody 4” are melody patterns. The factory preset is “Tone 1”. • You cannot change the ringer tone for intercom calls. • If you subscribe to a Distinctive Ring Service (such as IDENTA-RING) from your telephone company with 2 or 3 consecutive rings, select a bell ringer pattern (Tone 1 to 3). If you select a melody pattern, you will not be able to distinguish lines by their ringers. • If you select one of the melody ringer patterns, the ringer will continue to sound for several seconds if: — the caller hangs up before you answer the call, or — another person answers the call using another phone connected on the same line. 1 Press [MENU]. 2 Scroll to “Ringer setting” by pressing [d] or [B], then press Select. Ringer setting KBack dB Select L 3 Scroll to “Ringer tone” by pressing [d] or [B], then press Select. Ringer tone KBack dB Select L 4 Select the desired ringer tone by pressing [d] or [B]. • The handset will ring and the ringer tone will change. If the ringer volume has been turned off, the handset will not ring (p. 15). • You can also select the ringer tone by pressing [1] to [7]. Ringer tone1:Tone 1 KBack dB Save L 5 Press Save, then press [OFF]. Programmable Settings LCD Contrast Handset There are 6 levels of LCD contrast. The factory preset is “level 3”. 1 Press [MENU]. Preparation 2 Scroll to “Initial setting” by pressing [d] or [B], then press Select. 3 Scroll to “LCD contrast” by pressing [d] or [B], then press Select. 4 Select the desired contrast by pressing [d] or [B]. • The contrast will change. Initial settingBack Select K dB L LCD contrast Back Select K dB L Ex. Level 3 LCD contrast Low HighBack Save K dB L 5 Press Save, then press [OFF]. Message Alert Handset You can select whether or not the Ringer/Message Alert indicator on the handset will flash slowly when new messages in your voice mailbox have been recorded (p. 41). The factory preset is OFF. 1 Press [MENU]. 2 Scroll to “Initial setting” by pressing [d] or [B], then press Select. 3 Scroll to “Message alert” by pressing [d] or [B], then press Select. 4 Select “On” or “Off” by pressing [d] or [B]. Initial settingBack Select K dB L Message alertBack Select K dB L Message alert:Off Back Save K dB L 5 Press Save, then press [OFF]. • The Ringer/Message Alert indicator will not flash for new messages while the handset is in use. • The Ringer/Message Alert indicator acts both as a ringer indicator and as a message alert indicator. This indicator will flash rapidly when a call is received whether this feature is on or off. • Battery operating time may ...