Assessments - 6, GPA: 4.2
(
)
)
|
Facilidade de uso
These display prompts are shown below. No items stored Recharge battery 12 new calls 12 new calls GF H=Directory Voicemail Ringer off TINA ROBINSON 1-000-222-3333 The Caller List is empty or there are no stored items in the directory. The battery needs to be charged. Place the handset on the base unit to charge the battery (p. 14). The display shows the number of new calls and the battery strength while the handset is on the base unit. This display shows the number of new calls when O or N is pressed while the handset is off the base unit. To search from the most recent call, press O. To search from the oldest call, press N (p. 28). To go to the directory list, press FWD/EDIT a (Directory key). The display shows the voice mail message(s) is/are recorded (p. 46). When the handset ringer volume is set to OFF (p. 19), “Ringer off” will flash for about 45 seconds before the handset returns to the standby mode (p. 14). When a call is received, the display shows the caller’s name and number after the first ring. Preparation 9 Display No link to base. Place on cradle and try again. Talk 01-06-35 JACK SMITH 1-222-333-4444 11:20A JAN.10 .3 Ann 1234567890 Paging Press INTERCOM Intercom 00-00-07 Intercom hold 00-01-12 During a conversation, the display shows the length of the call (ex. 1 hour, 6 minutes and 35 seconds). The battery strength is also displayed (p. 13). The handset has lost communication with the base unit. Place the handset on the base unit and try again. This is a name from the Caller List. The display shows: — the caller’s name, — the caller’s number, — the time and date of the last call (ex. Jan. 10, 11:20 AM), and — the number of times called (ex. 3 times). This is a name from the directory. The stored name and phone number are displayed. The base unit is paging the handset (p. 49). The handset and the base unit are in the intercom mode (p. 49). An outside call has been put on hold by the handset user in the intercom mode. To release the hold, press (TALK) or (DIGITAL!SP-PHONE) (p. 50). NANCY BROWN 1-000-222-3333 ----Waiting---- Please lift up and try again Not available Directory full Save error A second call is received during a conversation (p. 52). O, N, BACK U or FWD/EDIT a was pressed with the handset while the handset was on the base unit. Lift the handset and press the button again. While the base unit was not in the standby mode, O or N was pressed to search the Caller List/directory list, FWD/EDIT a was pressed to select an option or (INTERCOM/CLEAR) was pressed. When trying to store an item or Caller List information in the directory, the directory memory is full (p. 32, 39). While storing items in the directory, the handset has lost communication with the base unit. Move closer to the base unit and try again. Preparation 11 Settings Connections HooksHooks AC Adaptor Telephone Line Cord Power Outlet (AC 120 V, 60 Hz) Raise the antennas. Single-Line Telephone Jack (RJ11C) Fasten the cords to prevent them from being disconnected. •USE ONLY WITH Panasonic AC ADAPTOR PQLV10 (Order No. PQLV10Z). •The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) •To connect a standard telephone on the same line, see page 58. •If your unit is connected to a PBX which does not support Caller ID and voice mail services, you cannot access those services. Battery Charge Place the handset on the base unit and charge for about 6 hours before initial use. •The IN USE/CHARGE indicator lights and a beep sounds. Preparation IN USE/CHARGE Indicator Battery strength You can check the battery strength on the handset display while the handset is on the base unit, while it is in use (making/answering a call etc.), or after viewing the Caller List or directory items, programming etc. The battery strength will remain for 5 seconds after using the handset, then the display will return to the standby mode (p. 14). The battery strength is as shown in the chart below. Display prompt Battery strength Fully charged Medium Low (flashing) Needs to be recharged. 13 Settings Recharge Recharge the battery when: —“Recharge battery” is displayed on the handset, Recharge battery —“ ” flashes on the display, or —the handset beeps intermittently while it is in use. •If you DO NOT recharge the handset battery for more than 15 minutes, the display will keep indicating “Recharge battery” and/or “ ” will continue to flash. Battery information After your Panasonic battery is fully charged (p. 13): Operation Approx. battery life While in use (TALK) near the base unit* Up to 4.5 hours away from the base unit Up to 3.5 hours While not in use (Standby) Up to 11 days *Within about 10 feet (3 m) •Battery life may be shortened depending on usage conditions, such as viewing the Caller ID Caller List or directory list, and ambient temperature. •Clean the handset and the base unit charge contacts with a soft, dry cloth once a month. Clean more often if the unit is subject to grease, dust or high humidi...