Assessments - 3, GPA: 3.3
(
)
)
|
Facilidade de uso
Emergency power can be supplied to the unit by connecting a Panasonic battery back-up power supply noted on page 6. For assistance, please visit 11 Preparation If you subscribe to a DSL service LPlease attach a noise filter (contact your DSL provider) to the telephone line between the base unit and the telephone line jack in the event of the following: – Noise is heard during conversations. – Caller ID features (page 32) do not function properly. Telephone To single-line telephone jack (RJ11C) Noise filter line cord (For DSL users) Battery installation 1 Insert the battery (1), and press it down until it snaps into the compartment (2). 2 Close the handset cover. 12 12 For assistance, please visit Preparation Battery charge Place the handset on the base unit for 6 hours before initial use. LThe unit will beep once, the CHARGE indicator will light, and “Charging” will be displayed. L“Charge completed” is displayed when the battery has been fully charged. The CHARGE indicator will remain lit. OR CHARGE indicator Note: LTo ensure the battery charges properly, clean the charge contacts of the handset and base unit with a soft, dry cloth once a month. Clean more often if the unit is subject to grease, dust, or high humidity. Battery strength You can confirm the battery strength on the handset display. Battery icon Battery strength 1 Fully charged 2 Medium 3 Low When flashing: needs to be recharged. 4 Discharged Recharging the battery Recharge the battery when: –“Recharge battery” is displayed or 3 flashes on the handset display. – the handset beeps intermittently while it is in use. Note: LRecharge the handset battery for more than 15 minutes, or the display will continue showing the indication. LIf the battery has been discharged, the handset will display “Charge for 6 HRS” and 4 when you place the handset on the base unit. Battery performance After your Panasonic battery is fully charged, you can expect the following performance: Operation Operating time While in use Up to 5 hours (talking) While not in use (standby)*1 Up to 11 days While using the Up to 3 hours clarity booster feature (page 22) *1 Handset is off the base unit but not in use. Note: LBattery power is consumed whenever the handset is off the base unit, even when the handset is not in use. The longer you leave the handset off the base unit, the shorter you can actually talk on the handset. Actual battery performance depends on a combination of how often the handset is in use and how often it is not in use. LOnce the battery is fully charged, you do not have to charge it again until “Recharge battery” is displayed or 3 flashes. This will maximize the battery life. For assistance, please visit 13 Preparation Battery replacement If battery performance diminishes, make sure you have cleaned the charge contacts and fully charged the battery. The battery needs to be replaced if any of the following are displayed after a few phone calls even when you have fully charged the battery. –“Recharge battery” – 3 (flashing) –“Charge for 6 HRS” – 4 LUse only the rechargeable Panasonic battery noted on page 6. 1 Press the notch on the cover firmly and slide it as indicated by the arrow. 2 Replace the old battery with a new one, and close the cover (see page 12 for battery installation). Attention: A nickel metal hydride battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery. Screen saver mode (Color display models only) Important: LOnly the KX-TG5576, KX-TGA551, and KX-TGA552 support this feature. After 1 minute of inactivity, the handset will enter screen saver mode if the handset is not on the base unit or charger. “Screen saver” will be displayed, and will occasionally change position in order to preserve the life of the display. Example: Screen saver To cancel screen saver mode To use the handset when it is in screen saver mode, first press {OFF}to turn the display on again. 14 For assistance, please visit Preparation For assistance, please visit 15 Controls and displays Controls Base unit A Display B {ERASE} C {ANSWER ON} ANSWER ON indicator D Navigator key E {MEMO} F MESSAGE indicator G {MESSAGE} H {STOP} I {GREETING REC} (Recording) J {GREETING CHECK} K Antenna L Speaker M Charge contacts N {PROGRAM} {AUTO} O {MUTE} P {CALL WAIT} {FLASH} Q {REDIAL} {PAUSE} R CHARGE indicator S IN USE indicator T {*} (TONE/A) U MIC (Microphone) V {SP-PHONE} (Speakerphone) SP-PHONE indicator W {HOLD} X {CONF} (Conference) Y {INTERCOM} {TRANSFER} INTERCOM indicator A A BC D E F G H I J K L K M N OPQR S T U V W X Y Preparation Handset J K L M N O P Q A Speaker B Soft keys C Headset jack/Audio jack D {C} (TALK) E Joystick F {s}(SP-PHONE) G {*} (TONE) H USB cable jack (color display models: KX-...