Assessments - 1, GPA: 5 ( )

Fabricante : Panasonic Arquivo Tamanho: 2.04 mb Arquivo Nome : KXTG6582.PDF Língua de Ensino:

(msg.: message) {3}{2}{3} – – 52 Play all msg. {3}{2}{4} – – 52 Erase all msg. {3}{2}{5} – r 53 Record greeting {3}{0}{2} – r 51 Check greeting {3}{0}{3} – – 51 Pre-recorded (Reset to prerecorded greeting) {3}{0}{4} – r 51 Ring count {2}{1}{1} 2–7 rings<4 rings> Toll saver r 55 Recording time {3}{0}{5} 1 min<3 min> Greeting only r 55 Remote code {3}{0}{6} <111> r 53 Screen call {3}{1}{0} Off – 50 Answer on {3}{2}{7} – r 50 Answer off {3}{2}{8} – r 50 Voice prompt(Change language) {1}{1}{2} {1}: {2}: Espanol r 14 Message alert {3}{4}{0} {1}: {0}: Off – 56 For assistance, please visit Programming *1 If “System” column is checked, you do not need to program the same item using another handset. *2 This tone lets you know when you receive an outside call while you are on another line or an intercom call. If you select “On”, the tone sounds 2 times. *3 Turn this feature off if you prefer not to hear key tones while you are dialing or pressing any keys, including confirmation tones and error tones. *4 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up the handset to answer a call, turn off this feature. *5 The handset can display the Internet address where you can download the operating instructions or get further information for this product, using your computer. *6 When the ringer volume is turned off on the handset, ~is displayed followed by the line indication (1, 2: cellular line, L: landline). If all line ringer volumes are turned off, “~” is displayed without the line indications. The handset does not ring for outside calls. However even when the ringer volume is set to off, the handset still rings for alarm (page 40), intercom calls, and paging (page 59). *7 Even when the ringer volume is set to off, the base unit still rings for intercom calls (page 59). *8 If you select one of the melody ringer tones, the ringer tone continues to play for several seconds even if the caller has already hung up. You may either hear a dial tone or no one on the line when you answer the call. *9 The preset melodies in this product are used with permission of © 2009 Copyrights Vision Inc. *10After the Bluetooth device is registered, the device name is displayed. *11This feature allows the unit to automatically adjust the date and time each time caller information including date and time is received. To turn this feature on, select “Caller ID auto”. To turn this feature off, select “Manual”. (Caller ID subscribers only) To use this feature, set the date and time first (page 14). *12If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 to 5). If you select a melody, you cannot distinguish lines by their ringers. *13The flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if necessary. The setting should stay at “700 ms” unless pressing {FLASH} fails to pick up the waiting call. *14Generally, the line mode setting should not be changed. This setting automatically maintains receiver volume at the proper level depending on the current telephone line condition. Set the line mode to “A” if telephone line condition is not good. For assistance, please visit Programming Special programming Alarm An alarm sounds at the set time for 3 minutes once or daily. Alarm can be set for each handset. Important: L Set the date and time beforehand (page 14). 1 {MENU} i {#}{7}{2}{0} 2 {V}/{^}: Select the desired alarm option. i {SELECT} Off Turns alarm off. Go to step 7. Once An alarm sounds once at the set time. Daily An alarm sounds daily at the set time. Go to step 4. 3 Enter the desired month and date. i {OK} 4 Set the desired time. 5 {AM/PM}: Select “AM” or “PM”. i {OK} 6 {V}/{^}: Select the desired alarm tone. i {SELECT} L We recommend selecting a different ringer tone from the one used for outside calls. 7 {SELECT} i {OFF} L When the alarm is set, Eis displayed. Note: L To stop the alarm, press any dial key or place the handset on the base unit or charger. L When the handset is in use, the alarm will not sound until the handset is in standby mode. Silent mode Silent mode allows you to select a period of time during which the handset will not ring for outside calls. This feature is useful for time periods when you do not want to be disturbed, for example, while sleeping. Silent mode can be set for each handset. Important: L Set the date and time beforehand (page 14). L We recommend turning the base unit ringer off (page 36, 37) in addition to turning the silent mode on. L If you have set the alarm, the alarm sounds even if the silent mode is turned on. Turning silent mode on/off 1 {MENU} i {#}{2}{3}{8} 2 {V}/{^}: Select “On” or “Off”. i {SAVE} L If you select “Off”, press {OFF} to exit. 3 Enter the desired hour and minute you wish to start this feature. 4 {AM/PM}: Select “AM” or “PM”. i {OK} 5 Enter the desired hour and minute you wish to end this f...

Baixe o seu

Para fazer o download, introduza 2 dígitos :