Assessments - 2, GPA: 4.5
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
This unit is an additional handset for use with Panasonic Digital Cordless Phones: KX-TG8231/KX-TG8232 You must register this handset with your base unit before it can be used. This installation manual describes only the steps needed to register and begin using the handset. Please read the base unit’s operating instructions for further details. Charge the batteries for 7 hours before initial use. Please read this Installation Manual before using the unit and save it for future reference. For assistance, visit our website: for customers in the U.S.A. or Puerto Rico. PQQX16156ZA DC0707YK0 Supplied accessories Accessory item Order number Quantity Charger PQLV30056Y 1 AC adaptor for charger PQLV209V 1 Rechargeable batteries AAA (R03) size HHR-4DPA (Part No. HHR-55AAABU) 2 Handset cover*1 PQYNTG8200ER 1 Belt clip PQKE10481Z1 1 *1 The handset cover comes attached to the handset. Note: LPlease read the base unit’s operating instructions for additional/ replacement accessories. Sales and support information LTo order additional/replacement accessories, call 1-800-332-5368. LTTY users (hearing or speech impaired users) can call 1-866-6051277. Connection (120 V AC, 60 Hz) Hooks Fasten the AC adaptor cord to prevent it from being disconnected. Note: LUse only the supplied Panasonic AC adaptor PQLV209. LThe AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) For assistance, please visit Battery installation/Battery charge Important: LUse only the supplied rechargeable batteries noted on page 2, 6. LUSE ONLY rechargeable Ni-MH batteries AAA (R03) size. LDo NOT use Alkaline/Manganese/Ni-Cd batteries. LEnsure correct polarities (S, T) when installing the batteries. LWipe the battery ends (S, T) with a dry cloth. LWhen installing the batteries, avoid touching the battery ends (S, T) or the unit contacts. 1 Press the notch on the handset cover firmly, and slide it in the direction of the arrow. 2 Insert the batteries negative (T) end first. Close the handset cover. 3 Place the handset on the charger for 7 hours before initial use. Note: LIf you fully charged the batteries, but the operating time seems to be short, wipe the battery ends (S, T) and the unit contacts with a dry cloth. For assistance, please visit Attention: A nickel metal hydride battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY (1800- 822-8837) for information on how to recycle this battery. Register the handset to the KX-TG8231/KX-TG8232 base unit 1 Lift the handset and press {OFF}. Place the handset on the base unit. LContinue the operation even when the handset display shows “Registering”. 2 Press and hold {x} (LOCATOR) on the base unit for about 5 seconds, until the registration tone sounds. LIf all registered handsets start ringing, press {x} (LOCATOR) to stop, then repeat this step. 3 With the handset still on the base unit, wait until a confirmation tone sounds and w stops flashing. Note: LIf an error tone sounds, or if w is still flashing, register the handset according to the base unit’s operating instructions. Changing the display language 1 {MENU} (center of joystick) 2 Select M by pushing the joystick in any direction. i {SELECT} 3 Push the joystick up or down to select “Change language”. i {SELECT} 4 Push the joystick up or down to select the desired language. 5 Press down the center of the joystick to save. 6 {OFF} For assistance, please visit Belt clip You can hang the handset on your belt or pocket using the supplied belt clip. NTo attach the belt clip NTo remove the belt clip For assistance, please visit Important safety instructions WARNING: LTo prevent the risk of fire or electrical shock, do not expose the product to rain or any type of moisture. LUnplug the product from power outlets if it emits smoke, an abnormal smell, or makes an unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact the Panasonic Call Center at 1-800-211-PANA (1-800-211-7262). LDo not place or use this product near automatically controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident. LCompletely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire. LRegularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire. CAUTION: Installation LOperating the product near electrical appliances may cause interference. Move away from the electrical appliances. LThe AC adaptor is used as the main disconnect device. Ensure that the AC outl...