Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
Note ••The maximum length of a detect number is 5 digits. The maximum length of an auto prefix number is 10 digits. Set auto prefix 1 Select [Menu] > > [Auto prefix], then press [OK] to confirm. 2 Enter the detect number, then press [OK] to confirm. 3 Enter the prefix number, then press [OK] to confirm. »»The setting is saved. Note ••This is a country dependent feature. ••To enter a pause, press and hold . ••If the prefix number is set and the detect number is left empty, the prefix number is added to all outgoing calls. ••The feature is unavailable if the dialed number starts with * and #. Network type Note ••This is a country dependent feature. It only applies to models with network type support. 1 Select [Menu] > > [Network type], then press [OK]. 2 Select a network type, then press [OK]. »»The setting is saved. Select the recall duration Make sure that the recall time is set correctly before you can answer a second call. In normal case, the phone is already preset for the recall duration. You can select among 3 options: [Short], [Medium] and [Long]. The number of available options varies with different countries. For details, consult your service provider. 1 Select [Menu] > > [Recall time], then press [OK] to confirm. 2 Select an option, then press [OK] to confirm. »»The setting is saved. Dial mode Note ••This feature is country dependent and only applies to models that support both tone and pulse dial. Dial mode is the telephone signal used in your country. The phone supports tone (DTMF) and pulse (rotary) dial. Consult the service provider for detailed information. 1 Select [Menu] > > [Dial mode], then press [OK] to confirm. 2 Select an option, then press [OK] to confirm. EN »»The setting is saved. First ring If you have subscribed to the caller ID service with your service provider, your phone can cancel the first ring before the caller ID is displayed on the screen. After the phone is reset, it can detect automatically if there is a caller subscription and start to cancel the first ring. You can change this setting to suit your preference. This feature only applies to models with first ring support. Turn the first ring on/off 1 Select [Menu] > > [First ring], then press [OK] to confirm. 2 Select [On]/[Off], press [OK] to confirm. »»The setting is saved. Note ••To reset the first ring status, go to the reset menu (see 'Restore default settings' on page 43). Auto clock Note ••This service is network dependent. ••Make sure you have subscribed to the caller ID service before you use this feature. It synchronizes the date and time on your phone with the public switched telephone network (PSTN) automatically. For the date to be synchronized, make sure the current year is set. 1 Select [Menu] > > [Auto clock], then press [OK] to confirm. 2 Select [On]/[Off] . Press [OK]. »»The setting is saved. . Register additional handsets You can register additional handsets to the base station. The base station can register up to 4 handsets. Auto registration Extra handsets of the same model can be auto- registered. Place the unregistered handset on the base station. »»The handset detects the base station and registers automatically. »»Registration is complete in less than two minutes. The base station automatically assigns a handset number to the handset. Manual registration/Pairing If auto registration fails or if you register a handset of a different model, register your handset manually to the base station. 1 Select [Menu] > > [Register], then press [OK] to confirm. 2 Press and hold on the base station for 5 seconds. Note ••For models with an answering machine, you hear a confirmation beep. 3 Enter the system PIN/passcode. Press [Clear] to make corrections. 4 Press [OK] to confirm the PIN/passcode. »»Registration is complete in less than 2 minutes. The base automatically assigns a handset number to the handset. EN Note ••If the PIN/passcode is incorrect or no base is found within a certain period, your handset displays a notification message. Repeat the above procedure if registration fails. ••The preset PIN/passcode is 0000. No change can be made on it. Unregister handsets 1 If two handsets share the same base station, you can unregister a handset with another handset. 2 Select [Menu] > > [Unregister], then press [OK] to confirm. 3 Select the handset number to be unregistered. 4 Press [OK] to confirm. »»The handset is unregistered. Tip ••The handset number displays beside the handset name in standby mode. Call services The call services are network and country dependent. They apply to models with call services support. Contact your service provider for more information. Note ••For the call services to work properly, make sure that the activation and/or deactivation codes are correctly entered. Call forward You can divert your calls to another phone number. You can select among 3 options: • [Call forward]: divert all incoming calls to another number. • [Call fwd busy]: divert calls when the line is busy. • [Call fw...
Este manual também é adequado para os modelos :Telefones sem fio - D7051B/23 (1.68 mb)