Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
Display icons In standby mode, the icons shown on the main screen tell you what features are available on your handset. Icon Descriptions The battery is fully charged, the talk time can go up to 14 hours. The battery is empty. It indicates if your phone is linked to a base. The call is in progress. The alarm is activated. The speaker is on. The ringer is off. Call log There is an unheard voice message. ECO The ECO mode is activated. 3 Get started Caution • Ensure you have read the safety instructions in the “Impor tant” section before you connect and install your handset. Connect the charger 1 Connect the power socket to a standard wall outlet. Install the handset Caution • Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire. • Use only the supplied batteries. • Risk of decreased batter y life! Never mix different brands or types of batteries. Note • Charge the batteries for 24 hours before first use. Warning • Check the battery polarity when inser ting in the batter y compar tment. Incorrect polarity may damage the product. a The batteries are pre-installed in the handset. Follow the direction of the arrow printed on the battery tape and pull it off from the battery door before charging. b Place the handset on the charging cradle to charge the handset. Note • If the handset becomes warm when the batteries are being charged, it is normal. English EN 9 Check the battery level The batter y icon displays the current batter y level. The batter y is full, the talk time can go up to 14 hours. The batter y is empty. Charge it. The handsets turn off if the batter y is empty. If you are on the phone, you hear warning tones when the batter y is almost empty. The call gets disconnected after the warning. Set the date and time 1 Press menu. 2 Select [CLOCK & ALARM] > [SET DATE/TIME], then press [SELECT] to confirm. 3 Press the numeric buttons to enter the date, then press [OK] to confirm. » On the handset, the time set menu is displayed. 4 Press the numeric buttons to enter the time. •If the time is in 12-hour format, press to select [AM] or [PM]. 5 Press [OK] to confirm. Set the date and time format 1 Press menu. 2 Select [CLOCK & ALARM] > [SET FORMAT], then press [SELECT] to confirm. 3 Select [DATE FORMAT] or [TIME FORMAT]. 4 Select the setting. Select [DD/MM][MM/ DD] as the date display and [12 HOURS] or [24 HOURS] as the time display. Then press [SELECT] to confirm. » The setting is saved. What is standby mode Your phone is in standby mode when it is idle. The standby screen displays the handset name, handset number, date and time, signal icon, and batter y icon. Note • If you set to display the screen saver in idle mode, the digital/analog clock is displayed when the screen saver appears. Check the signal strength • The signal icon displays the link status between the handset and base station. A steady icon means your handset and the base station are linked. A flashing icon means your handset and the base station are not linked. • Ensure the handset is linked to the base station before you make or receive calls and carry out the phone functions and features. • If you hear warning tones when you are on the phone, the handset is almost out of batter y or the handset is out of range. Charge the battery or move the handset nearer to the base station. Switch the handset On/Off •Press and hold to switch off the handset. The handset’s screen turns off. Note • When the handset is switched off, no call can be received. •Press and hold to switch on the handset. It takes a few seconds for the handset to power up. 10 EN 4 Calls Note • When the power fails, the phone cannot access emergency ser vices. Tip • Check the signal strength before you make a call or when you are in a call. For more information, see “Check the signal strength” in the Get star ted section. Make a call You can make a call in these ways: • Quick call • Dial before you call • Redial the most recent number • Call from the redial list. • Call from the phonebook list • Call from the call log Quick call 1 Press . 2 Dial the phone number. » The number is dialed out. » The duration of your current call is displayed. Dial before you call1 Dial the phone number • To erase a digit, press [CLEAR]. • To enter a pause, press and hold . 2 Press to dial out the call. Redial the most recent number 1 Press . 2 Press redial. 3 Press [SELECT]. » The most recent number is then dialed out. Call from the redial list You can make a call from the redial list. Tip • For more information, see “Redial a call” in the Redial list section. Call from the phonebook You can make a call from the phonebook list. Tip • For more information, see “Call from the phonebook ” in the Phonebook section. Call from the call log You can return a call from the outgoing, received or missed call log. Tip • For more information, see “Return a call” in the Call log section. Note • The call timer displays the talk time of your current call. Note • If you hear...