Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
1. Press to listen to the new messages. The messages will playback from first one recorded to the last one recorded. 2. If you wish to repeat the message, press to repeat the message. 3. If you wish to skip the message, press . 4. If you wish to erase the message, press the ERASE button while the message is playing or before the next message. Note: If there are new messages in both main store and mailboxes, the 2 digit LED will only signaled. -If there are no new messages in the main store but in the mailboxes, a mail box symbol will flash in the display. -If there are no new messages either in the main store or the mailbox, then the display will show the number of old messages in the main store but it will not flash. -If there are no new or old messages at all, the display will show “0”. M.BOX To record Incoming message in Mailboxes 4 Mailbox are provided The caller can choose to leave a message in a particular mail box by pressing the appropriate mail box number, or can leave a massage in the main mailbox. 1) The OGM message will be played after the set number of rings 2) Press the mailbox key after the OGM e.g press (1) for Mailbox 1, press (2) for Mailbox 2. It is the same as Mailbox 3 & 4. 3) The machine will start recording incoming calls in the chosen mailbox Listening to Incoming messages from the mailboxes There are 4 mailboxes. To listen to messages from mailbox: 1. Press the M.BOX , then the display will show “01” 2. If there are any new messages, the mailbox symbol will flash. 3. After 2 seconds, the display will change to show a flashing number of new messages in the mailbox. 4. Press the Button to skip back to the previous message or press the next button to forward to next message To listen to messages from other mailboxes: 1. To listen to messages from mailbox 2, press the M.BOX again. 2. The display will show the mailbox symbol and the number 2. 3. Please follow the same procedure as stated above for all mailboxes To exit from the mailboxes and return to main menu: After listening to last message in mailbox 4, press the M.BOX return to main menu. Note: To also exit from the mailboxes, press the button when no messages are playing or a short press on key during the 2 second time-out before the number of messages in the mailboxes are displayed. -During the time-out after the playback of messages in a mailbox, if you do not press any keys for 30 seconds, the answering machine will return to the main menu. Erasing the messages To erase old messages: 1. Press the erase key for 2 seconds while no messages are playing. Note: No new messages will be erased in order to prevent accidental erase. To erase individual messages: 1. Press the erase key while the message is playing or at the end of the message before the next message starts. Volume Control If you wish to change the volume, just push the volume control up or down to the desired level. High Low Recording a Memo You are able to leave a message for your household members through this feature. During recording, the telephone line must be inactive and the machine must be in Answer Off mode. 1. Press Answer Mode Button to Answer Off mode and the Answer Off Indicator is light up. 2. Press Record button. 3. After the beep and the displays shows “uc”, speak your memo. 4. Press Play/Stop or Record button to stop recording. 5. After the rotating “uc” stops, the memo will playback. 6. Press Answer Mode Button once or twice to restore to previous setting. REMINDOperating the New Message Indicator Function When you have turned the REMIND "On", and you have received a new message. The “New Message Indicator” function will ring every 10 minutes to remind you that there is a new message. 1. Press the REMINDREMIND to turn this function “On.” The LED will light up. 2. Press the again if you wish to turn this function off. D.N.D. Operating The Do Not Disturb Function The Do Not Disturb function offers privacy and convenience. This function switches off all audio functions from the answering machine, ringer and “New Message Indicator” function. 1. To turn on this function on, press the “Do Not Disturb” button, the LED D.N.D. will light up. 2. If you wish to turn this function off and reactivate the other functions, press the “Do Not Disturb” button. Note: When the Do Not Disturb function is “On”, the “New Message Indicator” function is automatically deactivated, and the REMIND LED is switched off. Operating the remote-control feature You can give commands to your answering machine from another telephone by entering the 4-digit remote code. 1. Dial the telephone number. 2. The answer machine will answer after the number of set rings. (If it is set in Answer-Off mode, it will answer after 9 rings). 3. Press to activate the remote functions. 4. Enter your personal remote pin code then the messages will start to playback . 5. Once all the messages have been played, the voice prompt will say “No more messages” 6. Press to listen to the Help commands Note : If an inc...