Assessments - 3, GPA: 3.7
(
)
)
|
Facilidade de uso
The phone will then go back to idle. De-register all handsets 1. Unplug the power from the base. 2. Press and hold the FIND button on the base for 10 seconds. 3. Plug back in the power of the base. 4. Release once the IN USE light starts to fl ash rapidly. 5. Within 2 seconds, press and release the FIND button on the base again. This will de-register all handsets. The IN USE light on the base will be OFF and NOT REGISTERED will display on each handset menu screen. call liSt (ciD) menu optionS Setup BS (Base) (Main Menu) Submenu settings allows you to select your personalized settings for the base: Ringer Tone (Melody settings 1-3), Ringer Volume (1-5), Dial Mode and Area code. answering machine (Main Menu) Submenu settings allows you to set the following: Answer Machine (Answer Off/Announce & Record/Announce Only), Message Alert (On/Off), Set Number of Rings before the Answer Machine picks up, Announcement (Announce & Record/Announce Only), Record Memo, Call Screening, Remote Access (On/Off) and set your own security code for remote access (default security code is 123). NOTE: tam = telephone answering machine. reset Setting (Main Menu) Submenu settings allows you to Clear your Voice Mail (service provided by your local telephone company) or to reset All Settings to the default settings. Date and time (Main Menu) The submenu will allow you to manually input the Year, Date and Time. If you have CID service (service provided by your local telephone company), this information will automatically register during your fi rst call. phonebook (Main Menu) Submenu settings allows the following options: View, Add, Edit, Delete, Delete All, Check your Phonebook Capacity and Set your Speed Dial for keys 1-9. Setup hS (Handset) (Main Menu) Submenu settings allows you to select your own personalized settings for the handset: Ringer Tone (Melody settings 1-3), Ringer Volume (Off, Vol. 1-5), Key Tone (On/Off), Low Batt Tone (On/Off), Out of Range (On/Off), Tone, Handset Name and Language (English/FRANCAIS/ Espanol). reSet SettingS reset all Settings This will reset all the personalized settings to the default settings. note: All entries in the Phonebook, Redial List and Call List will be cleared. 1. Press the MENU button and use the UP/DOWN buttons to select Reset Settings. 2. Next, press the MENU button and use the UP/DOWN buttons to select All Settings. 3. Press the MENU button to select Yes. Screen iconS (hanDSet anD BaSe) 1 2 3 4 5 7 6 8 9 10 1 1 1 2 1 3 1 4 1 6 1 5 1 7 1 8 1 9 20 2 1 22 Volume up/DoWn: Controls the answering machine volume (levels 0 to 8). 22 2 3 23 1 1 User guide D613™ TM D613 pleaSe reFer to the SaFety inStructionS SectionS For important proDuct SaFety inFormation prior to inStallation or uSe oF the proDuct. ! important SaFety inStructionS important SaFety inStructionS trouBleShooting trouBleShooting important SaFety inStructionS important SaFety inStructionS trouBleShooting trouBleShooting charging The Battery icon is not showing that it is charging when the handset is placed on the base. 1. Bad battery contact move the handset slightly. 2. Dirty contact. Clean the battery contact with a cloth moistened with alcohol. 3. Battery is full, no need to charge. no dial tone 1. No power, check the connections. Reset the phone: unplug and plug back in the electrical outlet. 2. The Battery has lost its charge. Charge the battery pack for at least 24 hours. 3. You are too far from the base, move closer to the base. 4. Make sure that you have used the telephone line cord and DC power adapter provided. 5. Make sure that the DC power adapter is connected correctly. poor audio quality 1. The base may be too close to electrical appliances, reinforced concrete walls or metal door frames. Place the base away from any electrical appliances. caller iD service does not work Check your subscription with your network provider. a phonebook entry cannot be stored The phonebook may be full. Delete an entry to free memory. no display 1. Try recharging or replacing the battery pack. 2. Reset the telephone base. Unplug the unit’s electrical power, then plug it back in. registration unable to register another handset 1. Be sure that it is a Clarity expandable handset that is compatible to the D613. 2. If there is a total of 5 handsets registered, the maximum has been reached. 3. The display shows NOT REGISTERED. You must de-register a handset in order to register a new one. regulatory compliance part 68 of Fcc rules information a) This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company. b) A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone c...