Assessments - 5, GPA: 3.8
(
)
)
|
Facilidade de uso
After setting Voicemail No, press UP (s) button to set Message Waiting function on/off. 2. The LCD display will show MESSAGE, WAITING, and 1.ON 2.OFF with a tick mark against the selected item. 3. Press 1 or 2 button to change the mode. 4. Press the UP (s) or DOWN (t) button to go to the next menu. Setting AUTOCONNECT ON/OFF 1. After setting Message Waiting Light Off, press UP (s) button to set AUTOCONNECT ON/OFF (default to ON). 2. The LCD display will show AUTOCONNECT, 1.ON 2.OFF. 3. Press 1 or 2 to change or current selected value.The tick mark will move against the selected value. 4. Press the UP (s) or DOWN (t) button to go to the next menu. E N G L I S H 13 Feature Set-up Clarity Power Technology TELEPHONE BASE With the Clarity Power feature, the high fre-quency sounds are amplified more than the low frequency sounds so words are not just louder, but clearer and easier to understand. BOOST Clarity Power On/Off The C600 has a button that controls the loudness of the receiver. Once the BOOST button is pressed, an extra level of amplification is added over the entire range of the volume control. The TALK button will light ORANGE to indicate the CLARITY POWER feature is activated. WARNING: When the TALK button is lit ORANGE volume may be at a high level.To protect hearing, lower the volume control to minimum before using. Volume Control The dial controls the level of volume the hand-set and headset receive.The volume dial provides up to 15 dB of volume before the CLARITY POWER button is activated. Once the CLARITY POWER button is pressed, the C600 will provide up to 30 dB of gain. Handset Ringer Set the switch marked Ringer ON/OFF located on the side of the handset.The ringer switch must be set to ON for the handset to ring. NOTE: If both handset and base ringerOs are set to OFF, the visual ringer will flash to indicate there is an incoming call. Ringer Volume The base ringer volume adjustments are located on the side of the telephone base. Telephone Base Pressing the UP (s) key on the base increases the ringer sound by one level while pressing the DOWN (t) key reduces the sound by one level.There are a total of six levels from maximum to minimum. The ringer will sound for two (2) seconds while choosing a ringer volume, to allow the user to make a choice. Ringer Style The base ringer style adjustments are located on the side of the telephone base. The style of ring can be adjusted by pressing the RING STYLE button. Six (6) styles are available allowing you to customize your ring. The ringer will sound for 2 seconds while choosing a ringer style, to allow the user to make a choice. Visual Ringers Visual ringers are located in both the handset antenna and the base of the telephone. Feature Set-up When an incoming call is received, these lights will flash.The handset visual ringer will also stay lit while the phone is in use. BOOST ON/OFF Switch This switch will disable the reset feature of the BOOST Clarity Power button as follows: ON —When the Boost ON/OFF switch is set to “ON”, the Boost function will be ON every time a call starts, and will default to ON every time the phone hangs up. During a call, the BOOST Clarity Power button can toggle the Clarity Power ON or OFF according to the userOs needs. OFF —When the Boost ON/OFF switch is set to “OFF”, the Boost function (Clarity Power) will be OFF every time a call starts, and the user will need to press the BOOST Clarity Power button in order to gain the extra level of amplification. If the phone hangs up, the Clarity Power will reset to OFF. During a call, the BOOST Clarity Power button can toggle the Clarity Power function on or off according to the userOs needs. Pulse/Tone Slide the switch to the type of telephone service you have; tone for touch-tone service or pulse for rotary dialing. Please check with your local telephone company if uncertain of the type of service. ! ! CAUTION: VOLUME WILL BE LOUD WHEN BOOST SWITCH IS SET TO “ON”. Flash The FLASH button is activated to use custom calling services such as Call Waiting or Three Way Calling. Please contact your local telephone company for information on these services. Mute The MUTE button allows the user to conduct a private conversation that you do not want the person on the other end to hear.While in the mute mode, the MUTE button will illuminate RED and the microphone in the handset is disabled. Pressing the MUTE button again will disengage the MUTE feature. Redial/Pause The RD/P button both the last number redial and the pause feature. Battery Backup Installing four (4) AA Alkaline batteries into the desk/wall mount bracket attached to the telephone base will offer you a limited amount of time to continue operating your telephone in the event of a power failure. To Install Battery Backup Batteries: 1. Disconnect telephone line cord and remove desk/wall mount bracket from telephone base 2. Disconnect battery backup connector from the telephone base 3. Install four (4) AA Alkaline batteries with ne...