Touch Intercom-Ring or Intercom-Voice to use the MERLIN system Intercom feature. Test your voice terminal and program its features by sliding the T/P switch to T (Test) or P (Program). Adjust the volume of your voice terminal’s speaker and ringing using the volume control. Read on to learn how to use these features...and many more. Tailor your voice terminal to meet your individual needs by programming available buttons with custom features. Use Conference, Drop, Transfer, and Hold for efficient

Press OFF to hang up. To preview numbers before dialing, then press PHONE to dial. Press V at any time to make corrections as you are entering numbers. Speed dialing & directory dialing To use speed dialing, press and hold a dial pad button (1-9) to display the number stored in that speed-dial location, then press PHONE to dial the number. To use directory dialing, press DIR, scroll or search to find the number you want, then press PHONE to dial the number. (See pages 15-19 to enter, edit or sea

See instructions on page 30. “Change remote access code” Set the remote access code you 50* will use to access features and functions of the answering system from a touch tone phone. “Change message alert” When Message A l e rt is turned on, Off * the base beeps once eve ry 10 On seconds when new messages have been received. “Change announce only” When you turn Announce Only Off * on, callers hear your On announcement but cannot leave a message. “Change base ringer” Turn the base ringer on or of

07:21 Page 2 STOP! See page 7 for easy instructions You must install and charge the battery before using the telephone For customer service or product Please also read information, visit our web site at Important Product Information Enclosed in product package or call 1-800-222-3111 CAUTION: To reduce the risk of fire or injury to persons or damage to the telephone, read and follow these instructions carefully: • Use only Replacement Battery 2422 (SKU# 23402). • Do not dispose of the battery in

O Off During a call, press to hang up. During programming, press to stop without making changes. H Hold Press to place a call on hold. Press again to resume your call. <> Volume/Function During a call, press <> to adjust listening volume. While programming, press to change menu item or value (see page 10). Press > DIR when phone is not in use to display phone book entries (see page 18). While entering numbers or letters, press to advance cursor. Press < CID when phone is not in use to display Ca

1 Connect the corded handset to the base. 2 Connect the telephone line cord. (figure a) 3 Connect the power cord to the base and an electrical outlet not controlled by a wall switch. (figure a) The answer ON/OFF light goes on, and CL flashes in the message window. Use only the power cord supplied with this p ro d u c t . If you need a re p l a c e m e n t , call 1-8002 2 2 – 3 1 1 1 . 4 Check for dial tone. • Lift the handset, you should hear a dial tone. .NOTE: For Wall Mount Installation see p

User Manual (Part 2) 2.4 GHz Cordless Telephone 2231/1231 with Caller ID & Call Waiting STOP! See page for easy instructions You must install charge batteries before using the telephone For customer service or product Please also read information, visit our web site at Important Product Information Enclosed in product package or call 1-800-222-3111 User Manual (Part 2) 2.4 GHz Cordless Telephone 2231/1231 with Caller ID & Call Waiting Table of contents Getting Started Quick reference guide .....

• Make sure the telephone line cord is plugged firmly into the base unit and the telephone jack. • Make sure the battery pack is installed correctly. • If the screen displays , place the handset in the base and charge for at least eight hours. • If the battery does not charge after eight hours, replace it with AT&T Battery 3301, SKU# 91076. PROBLEM SOLUTION If you have no dial tone: Check all the previous suggestions. If you still do not hear a dial tone, disconnect the phone and try another ph

All Rights Reserve d . AT&T and the Globe Symbol are tra d e m a rks of AT & TC o r p., licensed to A d vanced A m e rican Te l e p h o n e s . 1412 2002.12.7 9:20 AM Page III Visit us at © 2002 Advanced American Telephones. All Rights Reserved. AT&T and the Globe Design are trademarks of AT&T Corp., licensed to Advanced American Telephones. Printed in China. Issue 1AT&T 12/02 1412updatedmanual 2002.12.7 9:20 AM Page IV CONTENTS BEFORE YOU BEGIN.................. 1 Parts List....................

1430_book_2ATT-mk1(DEC21) 5/16/02 5:46 PM Page iii © 2001 Advanced American Telephones. All rights reserved. Printed in China. Issue 2AT&T 12/01 1430_book_2ATT-mk1(DEC21) 5/16/02 5:46 PM Page v BEFORE YOU BEGIN ...............1 Choosing a Location for Your Phone........................... 1 About Caller Identification .......... 1 INSTALLATION .......................2 Before You Install.......................... 2 Table/Desk Installation ................. 3 Wall Installation ....................