Assessments - 2, GPA: 5
(
)
)
|
Facilidade de uso
NOTE Please keep this manual handy as you use your new product. It contains practical step-by-step instructions, as well as technical specifications and warnings you should know. OVERVIEW FRONT VIEW 1 2 3 14 5 6 1. Projector : Projects time on the wall or ceiling 2. LCD display 3. SNOOZE / LIGHT : Turns on projector and backlight for 5 seconds 4. ALARM : Toggles between Alarm 1, Alarm 2 and Calendar 5. ON / OFF : Activates / deactivates the alarm 6. CLOCK : Toggles between different clock displays 1234567BACK VIEW 1. Battery compartment 2. ADAPTER : Adaptor slot 3. Reset : Press to reset 4. EU / UK (RM818P only) : Slide to select your nearest radio signal base 5. UP / DOWN : Increases / decreases setting; Enables / disables clock reception signal 6. PROJECTION ON : Enables continuous projection with AC adapter connected LCD DISPLAY 1 7 2 8 3 9 4 5 6 1. Clock radio reception signal 2. Time 3. Alarm display 4. Alarm time / calendar 5. Animation speed : Select fast or slow 6. Low battery 7. Time zone 8. Alarm ON : Appears when alarm 1/2 is activated. GETTING STARTED BATTERIES The unit uses 2 x AAA (UM-4) 1.5V batteries. Insert batteries before first use, matching the polarity (+ and -): NOTE appears when batteries are low. ADAPTER For continuous projection you must use the AC adapter. viene visualizzato quando le batterie Premere CLOCK per attivare una delle modalit di • Ora con secondi e calendario • Ora con giorno della settimana e calendario • Ora con fuso orario e calendario 12345673CLOCK DISPLAY MODES Press CLOCK to toggle between the clock displays: • Clock with seconds and calendar • Clock with weekday and calendar • Clock with time zone offset and calendar CLOCK RECEPTION This product is designed to synchronize its calendar clock automatically once it is brought within range of a radio signal: • DCF-77 generated from Frankfurt, Germany for Central Europe • MSF-60 generated from Rugby, England • WWVB-60 generated from the atomic clock in Fort Collins, Colorado The clock collects the radio signals whenever it is within 1500 km (932 miles) of a signal. RM818P only — slide the EU / UK switch to the appropriate setting based on your location. Press RESET whenever you change the selected setting. RECEPTION SIGNAL The reception icon will blink when it is searching for a signal. If the radio signal is weak, it can take up to 24 hours to get a valid signal reception. For best reception, place the clock away from metal objects and electrical appliances and place near a window. To enable / disable the clock radio reception, press and hold UP / DOWN. SETTING THE CLOCK Vibration alarm is set / Beep and vibration alarms are set No icons No alarm is set ACTIVATING / DEACTIVATING THE ALARM Press ON / OFF to toggle between alarm 1 and 2, ON or OFF. See the table above for further clarification. NOTE You can also activate / deactivate the alarm when you are in the alarm setting mode by toggling the ON / OFF button. SNOOZE / STOP ALARM To silence the alarm for 8 minutes, press SNOOZE / LIGHT. NOTE When the snooze function is activated, the alarm icon will flash. To stop the alarm and reset it to activate at the same time the next day, press any key except SNOOZE / LIGHT. THE VIBRATING DEVICE — VR101 (OPTIONAL) The vibrating wake-up device can be placed under your pillow and will wake you up by gently vibrating. All you need to do is activate the vibrating alarm option on the clock and switch the vibrating device to alarm 1, alarm 2 or both. You can purchase this device separately. NOTE Please refer to the vibrating wake-up alarm (VR101) user manual for further information. PROJECTOR Press SNOOZE / LIGHT to project the time (and turn • Do not clean the unit with abrasive or corrosive materials. This may scratch the plastic parts and Doing so will invalidate the warranty on the unit and may cause unnecessary damage. The unit • Only use fresh batteries as specified in the users instructions. Do not mix new and old batteries as the old ones may leak. this manual may differ from the actual display. NOTE The technical specifications for this product DESCRIPTION format interference to radio communications. However, there or on the warranty card corrode the electronic circuit. • Do not subject the unit to excessive force, shock, dust, temperature or humidity, which may result in malfunction, shorter electronic life span, damaged battery and distorted parts. pursuant to Part 15 of the FCC Rules. These limits are • Do not tamper with the units internal components. contains no user-serviceable parts. accordance with the instructions, may cause harmful 4. SVEGLIA: attiva la modalit Sveglia 1, Sveglia 2 o • Due to printing limitations, the displays shown in • The contents of this manual may not be reproduced without the permission of the manufacturer. and the contents of the user manual are subject to change without notice. TYPE Calendar Day of week Current date / month 12 or 24-hour format DECLARATION OF C...