Assessments - 2, GPA: 3.5
(
)
)
|
Facilidade de uso
The unit can pick up an RF signal when it is within 1500km (932 miles) of these locations. To select the most suitable radio signal for your location, slide the EU / UK switch to the appropriate setting. Press RESET whenever you change the selected setting. NOTE For best results, place the unit away from metal or electrical objects, and near a window with a clear view to the sky. TURNING THE RADIO RECEPTION ON / OFF To turn the radio reception on: • Press and hold the clock button for 2 seconds. • The RF reception icon will appear and flash on the display to indicate it is searching for the RF signal. Once batteries have been installed in the clock, the reception icon will flash to indicate it is searching for a signal. When the reception signal has been received the reception icon will show the signal strength by displaying between 0 and 3 waves: STRONG NO SIGNAL WEAK SIGNAL SIGNAL To turn the radio reception off: • Press and hold the button for 2 seconds. • The RF reception icon will disappear from the display. 5 ENEN CLOCK / CALENDAR CLOCK / CALENDAR DISPLAY There are 3 types of clock display: Calendar / Calendar / Calendar / Clock / Clock / Sec Clock / Day Offset Time Press the MODE button to toggle between the 3 types of display. SETTING THE CLOCK / CALENDAR Before you can manually set the clock and calendar, you must specify the current time zone you live in and the time format (12- or 24-hour) as follows: 1. Press and hold the MODE button for 2 seconds. The time zone offset hour digits will flash. When an offset hour has been set (e.g. +1, the time displayed will be the RF clock time plus 1 hour.) 2. Enter the value by pressing the or buttons. 3. Confirm the entry by pressing the MODE button. The 12- or 24-hour display format will flash. 4. Repeat (2) and confirm the entry by pressing the MODE button. 5. Repeat the above procedures to set the hour, minute, year, MM / DD or DD / MM format, month, day, day-of-the-week language and hourly chime (On / Off). You can select 1 of the 5 following languages: SYMBOL LANGUAGE English German French Italian Spanish HOURLY CHIME The hourly chime function when set to ON will beep once at the beginning of every hour, and the chime icon will show on the display. TEMPERATURE To choose between °C / °F, slide the switch up or down to the setting you want. The display can show indoor temperatures ranging from -5°C to +50°C (23°F to +122°F). ALARM ALARM DISPLAY There are 3 types of alarm display: Press the ALARM button to toggle between the 3 types of display. Daily Alarm / Start Time Stop Time for Clock for Backlight Backlight activated by activated by Nightlight Nightlight IMPORTANT When you press and hold ALARM for 2 seconds to enter the Setting Mode you need to make sure you are in the correct alarm display (see above for reference). SETTING THE ALARM To set the alarm: 1. Press and hold the ALARM button for 2 seconds when the selected alarm is displayed. The hours will flash. 2. Enter the values by pressing or . 3. Confirm the entry by pressing the ALARM button. 4. The minutes will flash. 5. Repeat (2) and (3) to finish the setting. The alarm will be activated automatically and the alarm icon will appear on the display. 6 EN ACTIVATING / DEACTIVATING THE ALARM To activate or deactivate the alarm: 1. Press the ALARM button. 2. Press the or button. When the alarm icon appears on the display, the alarm is activated. When the alarm icon does not appear on the display, the alarm is deactivated. ALARM SOUND When activated, the alarm icon flashes, the backlight will come on for 8 seconds and a beeping noise starts quietly. The alarm gradually becomes louder until it crescendos at 2 minutes. TURNING THE ALARM SOUND OFF To turn the alarm sound off and automatically activate it again after 24 hours, press any of the following buttons: • MODE • ALARM • UP • DOWN CLOCK BACKLIGHT TO MANUALLY TURN THE BACKLIGHT ON Press the LIGHT button on the clock, and the backlight will turn on for 5 seconds. TO ACTIVATE THE BACKLIGHT USING THE MOTION / LIGHT SENSOR The clock backlight can be set up for a certain period of time to turn on for 10 seconds when a movement is detected in a dark room. Simply: 1. Press the ALARM button twice to get to the Backlight Setting Display. 2. Press and hold the ALARM button for 2 seconds to enter the Backlight Setting Mode. 3. The Code setting will flash. 4. Press the or buttons to change the setting. (Make sure you select the Code setting that matches the Code switch in the back of the nightlight). 5. Confirm the entry by pressing the ALARM button. 7 6. The Motion Start Hour will flash. 7. Repeat (4) and (5). 8. Continue the above procedures to set the Motion Stop Hour. 9. When the icon appears on the display, the function is activated. When the icon does not appear on the display, the function is deactivated. NOTE Light ON – Press to turn the clock backlight ON for 10 seconds remotely. NOTE The nightlight Clock Control switch must be set to On for this func...
Este manual também é adequado para os modelos :Gravadores Tempo - JUMBO RF WALL CLOCK WITH NIGHT SENSOR JMR868 (1.14 mb)