Assessments - 3, GPA: 5
(
)
)
|
Facilidade de uso
The AUX indicator on the front will turn on. Press again to switch back to listen to the radio. Auto brightness control Setting wake time This unit allows two wake times to be set. 1. Slide the switch /WAKE1/ WAKE2/ on the top of the unit to WAKE 1 or WAKE 2 position. 2. Press REV or FWD to set the respective wake time. The time decrements or increments will follow by a faster rate when you press and hold the buttons. The “:” between hour and minute time fl ashes when you are setting the time. 3. Slide the switch /WAKE1/ WAKE2/ on the top of the unit to position when fi nished. Selecting wake source You may be woken up by radio or alarm. 1. Select an AM or FM station (see directions on “Radio”). 2. Set a wake time (see above direction). 3. Press WAKE – OFF 1 or 2 repeatedly on the top of the unit to select a waking mode. Corresponding icon lights on the front of the unit. Turning off the wake alarm or radio Press SNOOZE on the top of the unit. The wake alarm or radio will be switched off temporarily. The alarm or radio will be on again when the snooze period is over. (see “SmartSnoozeTM Operation”) To turn off the wake alarm or radio completely, press OFF. The wake alarm or radio will activate again the next day unless you switch off the Wake function (see “Switching off Wake Function”). 1 – Wake 1 by alarm 1 – Wake 1 by radio 2 – Wake 2 by alarm 2 – Wake 2 by radio Checking wake time Slide the switch /WAKE1/ WAKE2/ on the top of the unit to WAKE 1 or WAKE 2 position to check the currently set wake time. The unit equips with GRAD-U-WAKE feature, the alarm tone volume will increase gradually to its maximum in about 30 to 45 seconds. Wake function SmartSnoozeTM operation This operation allows extra sleep time after the wake function is on. The alarm will be off by pressing SNOOZE, NAP, SLEEP, REV or FWD until the snooze period is over. Snooze function can be used repeatedly up to 30 minutes (default: 9 minutes). After this, the wake function will turn off until the next day. Set the “quiet” period as follow: 1. Press and hold SNOOZE. 2. Press REV or FWD to set the quiet period. The time decrements or increments will follow by a faster rate when you press and hold the buttons. SmartSnoozeTM is only available when /WAKE1/WAKE2/ is at the lock position. Switching off wake function Press WAKE – OFF 1 or 2 repeatedly on the top of the unit until no wake mode icon shows on the display. In sleep mode, you can set the duration (up to 2 hours) before the radio turn off automatically. 1. Press and hold SLEEP on the top of the unit and use REV or FWD to set the duration up to 2 hours. The time decrements or increments will follow by a faster rate when you press and hold the buttons. Note: The radio will be switched on. 2. To check the remaining duration before the radio turns off, press and hold SLEEP. 3. To cancel the sleep function, press SNOOZE or OFF. Sleep function NAP function This function wakes you up after a short period of time (from 10 minutes to 2 hours, default: 20 minutes). 1. Press NAP once on the top of the unit. The NAP icon fl ashes on the display. Press REV or FWD to set the NAP duration up to 2 hours (each press decreases or increases duration by 10 minutes). 2. The clock time shows after a few seconds if no button is pressed. NAP icon shows on the display to indicate the function is activated. 3. To check remaining NAP time, press NAP once to show the time on the display briefl y with the NAP icon fl ashing on the display. 4. When the alarm sounds, press SNOOZE to switch it off. • To cancel the function before the nap time ends, press and hold NAP until no nap icon shows on the display. Warranty information Clock time and radio frequency are display on the display area at the front of the unit. The display brightness can be adjusted automatically by analyzing the intensity of surrounding light sources. Slide AUTO DIMMER on the back of the unit to ON position to activate the function. Canadian time zones Auto clock set You do not have to set the clock time as a built-in automatic time set system is equipped in this clock powered by 2 AA batteries (included and installed). Follow the instructions below to get the clock time shown correctly. 1. Plug for power Insert the plug of the unit into an AC power outlet. 2. Select daylight saving Slide the DST switch at the back of the unit to turn on/off in areas observing/not observing such time change. The icon shows on the display when daylight saving time is active. 3. Select your time zone Press TIME ZONE repeatedly at the back of the unit to cycle through the time zones (EST > CST > MST > PST > AKST > HST > AST > EST...). The default time zone is Eastern (EST) (refer to the maps on the right). Your clock is now set and ready for use. WARNING: Please avoid playing with these buttons after entering the Clock/Alarm set mode. 12 Month Limited Warranty Applies to RCA Audio/Video Products AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail ...
Este manual também é adequado para os modelos :Gravadores Tempo - RP5435 (513.18 kb)