Assessments - , GPA: ( )

Instruções de Operação Kompernass, Modelo KH 2198

Fabricante : Kompernass
Arquivo Tamanho: 842.44 kb
Arquivo Nome : 9146db79-ac07-4d35-bfaf-ddd5d7fdddb7.pdf

Língua de Ensino:

O documento está colocado, por favor, espere

Baixe o seu Fechar

O documento está colocado, por favor, espere

Baixe o seu Fechar

If a battery is swallowed, medical assistance must be sought IMMEDIATELY. Important! No liability/warranty claims will be considered for damage to the device caused by the effects of moisture, water penetration or overheating! Intended Use This device is designed to wake you by means of an alarm tone or radio and also for the reception of radio transmissions. Any other usage of, or modification to, the device is deemed to be improper usage and carries the risk of serious personal injury. The manufacturer accepts no liability for damages that result from an improper use of the device or that are caused by an incorrect operation of it. It is not intended for commercial use. - 4 Items supplied 1 Projection alarm clock with radio, 1 Operating manual The batteries and a 3V-mains adaptor (accessories), required for operation, are not included in the supply. After unpacking the device, immediately check to determine that all listed items are present and that the device is in a faultless condition. Remove all packagng materials and the protective foil from the display. Operating Elements q Projection lens w Telescopic antenna e Switch ALARM ON/OFF/AUTO r Button SNOOZE t Waveband selector FM/AM y Button PROJECTION LIGHT, Display illumination u Switch PROJECTION ON/OFF i Display o Sound volume regulator OFF/BUZZ/VOLUME a Connection for 3V power adapter s Frequency scale d TUNING regulator f Button TIME g Button ALARM h Button MIN (Minute) j Button HOUR (Stunde) k Battery compartment l Projection focus (FOCUS) - 5 Technical Data This device has been tested and approved in accordance with the basic requirements and other relevent regulations of the EMC guidelines 2004/108/EC as well as the guidelines for low voltage devices 2006/95/EC. Battery operation: KH2198: 3 x 1.5 V Type Micro / AAA / LR03 (not supplied) for radio operation, display illumination and projection. KH2199: 3 x 1.5 V Type Mignon / AA / LR06 (not supplied) for radio operation, display illumination and projection. Operating voltage : 3 V (Radio operation/Projection), 1.5 V (hour) Frequency range : FM (USW) : 87,5–108,0 MHz AM (MW) : 530–1600 kHz Mains adapter: (Mains adapter not supplied) Input voltage: 230 V ~ 50 Hz Output voltage: DC 3V (+/- 5%) Rated current: min. 300 mA Polarity: Even when using 3 V mains adapter, a battery must be inserted. Otherwise, the clock will not function. For Model KH2198: Insert the single battery into the upper part of the battery compartment k. The two other batteries, one above the other, power radio operation and the projection. For Model KH2199: Insert the single battery into the compartment marked “CLOCK USE”. - 6 Important: Ensure that you have the correct polarities with the batteries and the power adapter. False polarity will damage the device. The device can be operated as follows: • only with batteries , • with a mains power adapter and a battery for the clock. Inserting the batteries KH2198: You require three 1.5 V batteries of the type Micro / AAA / LR03. 1. Open the cover of the battery compartment k on the underside. 2. Insert the three batteries into the battery compartment k, paying heed to the polarity markings shown in the battery compartment k. Ensure that the black textile strip is positioned under the batteries, this will make future battery exchanges easier. 3. Close the cover, ensuring that it engages. KH2199: You require three 1.5 V batteries of the type Mignon / AA / LR06. 1. Open the cover of the battery compartment k on the underside. 2. Insert the three batteries into the battery compartment k, paying heed to the polarity markings shown in the battery compartment k. 3. Close the cover, ensuring that it engages. - 7 Placing • Place the projection clock onto a level surface. • Position the projection clock such that the projection lens q is directed onto an empty surface. The distance from the projection lens to the projection area (ceiling or wall) must lie b...