Log:
Assessments - 1, GPA: 5 ( )

Instruções de Operação Casio, Modelo PQ-65

Fabricante : Casio
Arquivo Tamanho: 611.72 kb
Arquivo Nome :
Língua de Ensino: en
Ir para baixar



Facilidade de uso


3. After making the settings you want, use the SET button (5) to display the Normal Timekeeping Screen. •The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display for about three minutes without performing any operation. Alarm Mode selector SNZ ON OFF Description The alarm sounds at the preset time for one minute, and up to seven more times every five minutes thereafter. Even if you stop the alarm by pressing the SNOOZE/ LIGHT button (1), the alarm sounds again five minutes later. •The indicator flashes on the display to indicate that the snooze feature is activated. The alarm sounds at the preset time for one minute. The alarm does not sound. USING THEALARM The alarm sounds when the alarm time you set is reached. You can also use the Alarm Mode selector (2) to select the snooze alarm feature. Setting the Alarm Time Use the + and – buttons (3) to set the alarm time. Pressing the + and – buttons (3) causes the alarm time to appear in place of the date on the display. ALARM SET Press + to change the alarm time setting. Press – to change the alarm time setting. Press + to change the alarm time setting. Press – to change the alarm time setting. PQ-65DQ-745 •Holding down + or – changes the digits at high speed. Turning the Alarm On and Off Use the Alarm Mode selector (2) on the side of the clock to turn the alarm on and off, and to select the snooze feature. •The alarm time appears in place of the date on the display whenever the Alarm Mode selector (2) is set to ON or SNZ. •The light also turns on for the first four seconds that the alarm sounds. •The alarm sound changes over four levels as it sounds. Stopping the Alarm •When alarm is sounding, press the SNOOZE/LIGHT button (1) to stop it. When the snooze feature is turned on, the alarm will sound again in about five minutes. •To turn off the snooze feature, slide the Alarm Mode selector (2) to OFF. USING THE LIGHT Pressing the SNOOZE/LIGHT button (1) turns on the light and illuminates the display for easy reading in the dark. Important! •Overuse of the light can shorten battery life. Operation Guide DQ-745/PQ-65 3 THERMOMETER FUNCTIONS •A built-in sensor measures temperature and shows the measured value on the display. •The temperature display shows “LO” for temperatures below –50°C (–58°F) and “HI” for temperatures above 70°C (158°F). •Though temperature readings are displayed up to 0°C (32°F) and greater than 41°C (105°F), note that such readings are actually outside the guaranteed temperature range of this clock. Switching between Celsius and Fahrenheit •Push the °C/°F button (4) to select either Celsius (°C) or Fahrenheit (°F). °C/°F button (4) °C °F Celsius (°C) Fahrenheit (°F) BATTERY REPLACEMENT Replace batteries whenever the display of the clock becomes dim and difficult to read. 1. Open the battery compartment cover as shown in the illustration. 2. Remove all of the old batteries. 3. Load a full set of new batteries. Make sure that their p...

Este manual também é adequado para os modelos :
Gravadores Tempo - DQ-745 (611.72 kb)
Gravadores Tempo - MA0505-EA (611.72 kb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias