Assessments - , GPA: ( )

Instruções de Operação Honeywell, Modelo Digiview PC07

Fabricante : Honeywell
Arquivo Tamanho: 744.76 kb
Arquivo Nome :

Língua de Ensino:

O documento está colocado, por favor, espere

Baixe o seu Fechar

O documento está colocado, por favor, espere

Baixe o seu Fechar

98 PC04 PC07 PC06 TIME PROJECTION The Sport Alarm Clock can project the time display for ashort period when operating on batteries, or continuouslywhen using the AC/DC adapter. The clock is designed toproject the time image on the ceiling in red, no focusingis required. NOTE: Time display on the ceiling and the time onthe LCD display cannot be viewed simultaneously, astheir viewing directions are opposite. Place the unit atthe head of your bed to view the projected imagecorrectly. CURRENT TIME PROJECTION Press "LIGHT/SNOOZE" button to turn on the LCD backlight and project the time display onto the wall orthe ceiling for 3 seconds. CONTINUOUS TIME PROJECTION Connect AC/DC adapter (optional) to project the timedisplay continuously. CALENDAR AND CLOCK DISPLAY MODES The Alarm Clock has a three (3) display modes: TIME, DATE and ALARM The current time is displayed in hour-minutes formatwhich is the default display mode. The date is displayedin month-date format. The alarm time is displayed in hour-minutes format. ENABLE OR DISABLE ALARM AND CHIME PRECAUTIONS • Press SET button in TIME display mode. Alarm hour This product is engineered to give you years ofand minute digits will flash.satisfactory service if handled carefully. • Press MODE button to enable or disable the alarm and Here are a few precautions: chime in the following sequence: 1. Do not immerse the unit in water. 2. Do not clean the unit with abrasive or corrosive materials. They may scratch the plastic parts andALARM ON-corrode the electronic circuits. ALARM&CHIMEON-3. Do not subject the product to excessive force, shock, dust, temperature, or humidity, which may result in malfunctions, shorter lifespan, damaged batteries, CHIME ON-and damaged parts. ALARM&CHIME OFF -4. Do not tamper with the unit's internal components. ALARM ON-Doing so will invalidate the warranty and may cause damage. This unit contains no user-serviceable parts. 5. Use only fresh batteries. Do not mix new and old • Press SET button to confirm the batteries. alarm and chime status. Clock will 6. Read the user's manual thoroughly before operatinggo into TIME and DATE set mode. Wait and clock willthe unit. return to TIME display mode. SPECIFICATIONS TO STOP ALARM Projection To stop the alarm for 24 hours, press SET when alarm Current time display projected onto the ceiling or wall is activated. Fixed red display projectionTo stop alarm for 5 minutes, press SNOOZE/LIGHTbutton Calendar and Clock If no button is pressed, alarm will stop in 2 minutes.12/24 hour display in hh : mm formatPress MODE button to disable the alarm in ALARM Date Format: Month - Day format display format while alarm time digits are flashing.Single 2-minute crescendo alarm with snooze and chime(The bell icon will disappear from the display whenLED backlightalarm is disabled). Power CHIME 2 AAA batteries (not included) When CHIME is activated, it will sound at every hour. AC/DC Adapter (3V, 100mA), center pin positive (optional) Dimensions 4.33 (L) x 4.72 (H) x 4.33 (D) inches 12 13 SETTING THE CLOCK ALARMTIME AND DATE If the alarm is activated, it will sound at the set time andAfter batteries are installed as shown inside the batteryt...