Assessments - 2, GPA: 3
(
)
)
|
Facilidade de uso
of Interval TO SET THE COUNTDOWN TIMER(S) 1. Select TIMER mode using the MODE button. The last operating status of the timers will be displayed. 2. Press the SET button. The parameters will blink and are set by pressing MODE in the order of: • Timer type Select timer interval 1 or 2 • Hours Enter the desired hours • Minutes Enter the desired minutes • Seconds Enter the desired seconds • Stop or repeat option Select STOP AT END to stop after each countdown or REPEAT AT END to reload and repeat the countdown after reaching zero To start a countdown, press the START/SPLIT button. To stop, press the STOP/RESET button. To continue the countdown, press the START/SPLIT button again. You can clear a countdown to zero by pressing and holding the STOP/RESET button after resetting the countdown or finishing the setting. When a countdown reaches zero, the back light will flash and beeps will be emitted. Press any button to turn off beeping when timer goes off. If the REPEAT AT END option is chosen for a timer, the timer will repeat the countdown after reaching zero, it can repeat up to 99 rounds. HEAT TIMER MODE There are 5 pre-set heat timers: 15 min, 20 min, 25 min, 30 min and 35 min. 1. Select heat timer (HT TMRI mode using the MODE button. The last operating status of the timers will be displayed. 2. Press the SET button. 3. Press START/SPLIT to scroll through the set times. Press the SET button to select the time interval you want. 4. Press the START/SPLIT button to start the heat timer. 5. Press the STOP/RESET button to stop the timer. Press and hold the STOP/RESET button to clear and reset the timer. ALARM MODE Alarm Frequency No. of alam Hour Minutes AM/PM Indicator There are three independent alarms. Each can be set to operate differently....
Este manual também é adequado para os modelos :Gravadores Tempo - FS80932 (1.04 mb)
Gravadores Tempo - FS80933 (1.04 mb)
Gravadores Tempo - FS80934 (1.04 mb)