Assessments - 5, GPA: 4.6 ( )

Fabricante : Orbit Manufacturing Arquivo Tamanho: 1.71 mb Arquivo Nome : Língua de Ensino:

The water drop will disappear. Set the Timer to Automatically Run Your Programs: • Turn the selection dial to AUTO. The timer will be controlled automatically by the programming parameters that have been set. To Turn All Watering Off: • Turn the selection dial to OFF. This prevents the timer from turning any watering station on at any time, regardless of programming. To Prevent Watering on a Particular Day: There may be one or more days of the week when you never want to have the water turn on, regardless of what the program C C C C says. (For example, in some water districts, watering is prohibited on certain days.) To cancel programmed watering on specific days of the week, follow these steps: • Turn the selection dial to NO WATERING DAY/PERIOD. On the display, you will see the seven days of the week with a water drop above each day. The water drop means watering is allowed on that particular day. • Press the NEXT button to select the day of the week you don’t want to water. (The day will flash.) • Press the CLEAR button. The water drop above that day will disappear and the “ON” on the bottom right of the display will change to “OFF.” This means the timer will pre- vent watering on that day. • To unblock a day that has been selected as a no watering day, select the day (following the same steps), then press the ENTER button. The water drop will reappear and the “OFF” will change to “ON.” • Exit the “NO WATERING DAY” selection mode by turning the selection dial. To Prevent Watering During a Particular Period of the Day: There may be a time of the day when you never want the water to come on, regardless of what the program calls for. (Perhaps your community has banned watering during certain periods of the day, or you don’t want your children to get wet going to school.) Here’s what to do: • Turn the selection dial to NO WATERING DAY/PERIOD. • Press the RAIN DELAY button. The display reads “SET NO WATER START PERIOD.” • Press either the or button to set the start time of the period you don’t want the water to come on. • Press the ENTER button. The display reads “SET NO WATER END PERIOD.” • Press either the or button to set the end time of the period you don’t want the water to come on. • Exit the “NO WATERING PERIOD” selection mode by turn- ing the selection dial. NOTE: If programmed watering is interrupted by a no-watering period, the timer will resume the watering schedule where it left off as soon as the no-watering period is over. If the no-watering period prevents scheduled watering from starting, the timer will start the watering as soon as the no-watering period is over. This feature is called “stacking.” Set Water Budgeting: Water Budgeting is a quick way to adjust your set durations (10 to 200%) based on seasonal requirements. • Turn the selection dial to BUDGETING/LANGUAGE. • Either press the button to increase the watering times, or press the button to decrease the times in increments of 10 percent. A setting of 100% will not change the set durations, a setting of 200% will increase a 10 minute C duration to 20 minutes, and a setting of 10% will decrease a 10 minute duration to 1 minute. • Exit the set water budgeting mode by turning the selection dial. Test All Stations: With the “TEST ALL” function, you can easily test all the watering stations by turning them on in sequence for one minute each. • With the dial in the AUTO position press the MANUAL button. • The display reads “TEST ALL” to the right of the letters “A” and “B.” • Press the ENTER button. Each watering station will turn on for one minute, in sequence. To abort this process before the test is finished, press the CLEAR button. To advance quickly from one station to the next press NEXT . Otherwise, the timer will automatically exit the “TEST ALL” mode after all stations have run for one minute. Manual Watering - All Stations: With the “MANUAL ALL” function, you can manually turn on the watering stations at any time. • With the dial in the AUTO position press the MAN...

Baixe o seu

Para fazer o download, introduza 2 dígitos :