Assessments - 5, GPA: 3.2
(
)
)
|
Facilidade de uso
In this package you will find: . Atomic Projection Clock with Temperature . AC/DC adaptor Please keep this manual handy as you use your new item. It contains practical step-by-step instructions, as well as technical specifications and precautions you should know. Battery cover SNOOZE/ Backlight/ Projection Light key + / — key MODE key Rotate key Flipkey Focus key Projector Lens Adjustable projector Adaptersocket ALARM 2ALARM 1 ROTATE FOCUS FLIP DC 3V CONTINUEPROJECTION LIGHT / SNOOZE Continuous Projectionkey MODE PMDATE MONTH SET SET ATOMIC CLOCK FEATURES *Current time image is projected onto the wall or ceiling in bright red digits. * Precise time and date are set via RF signal from the US Atomic Clock in Colorado. *US map with designated Time Zones * Projected image rotation, flip and focus control *Calendar displays date with month *Weekday in English, Spanish and French * Indoor temperature *Moon phase display *Dual crescendo alarm with snooze *Blue backlight 1 2 3 4 DISPLAYING PROJECTED INFORMATION CONTINUOUSLY Connect AC/DC adapter as shown below. Battery cover Batterycompartment Please make sure your household voltage matches the voltage supported by the adapter, or it will damage your clock and adapter. Use 2 X AA, 1.5V batteries and AC-DC adapter (AC120V, 60Hz-DC3V, 100mA) included. Important: ROTATE FOCUS FLIP SIZE AA/UM3 SIZE AA/UM3 DC 3V CONTINUEPROJECTIONMODE PMDATE MONTH SET SET ATOMIC CLOCK GETTING STARTED * After batteries are installed, the WWVB time signal receiver will automatically search for the time signal. This will take about 5 – 8 minutes. Always place clock by the window for better reception. * If the radio signal is received, the date and time will be set automatically and the icon [ ] will appear. * If after 8 minutes the time signal has not been received, press the “MODE” button to set the time manually. The clock will continue to search for the WWVB time signal daily from 1:00am to 4:30am. When the signal has been successfully received, the time and date will be updated automatically. PM DATE MONTH ZZ INDICATOR STANDING FOR STANDING FOR INDICATOR RADIO SIGNAL DATE ALARM 1 ALARM 2 TIME ZONES PM (12 HR DISPLAY ONLY) AM AM (12 HR DISPLAY ONLY) MONTH MOONPHASE DEGREE CELSIUS DEGREE FAHRENHEIT REPEAT ALARM INDICATION ATOMIC TIME AND WWVB SIGNAL The NIST (National Institute of Standards and Technology) radio station is located in Ft. Collins Colorado. It transmits an exact time signal continuously throughout the continental United States at 60 KHz frequency. The Atomic Projection Clock with Temperature can receive this WWVB signal through its internal antenna from up to 2,000 miles away. Due to the nature of the Earth’s ionosphere, reception can be limited during the daylight hours. The radio controlled clock will search for an alternate station that derives its signal from the NIST Atomic clock in Boulder, Colorado. The WWVB tower icon on the main unit’s display will flash indicating radio signal reception from the WWVB station. If the tower icon is not fully lit, or if the time is not set automatically, please consider the following: * During night-time hours, atmospheric disturbances are typically less severe and reception may be improved. A single daily reception is sufficient enough to keep the clock accuracy reading within 1 second. * Make sure the main unit is positioned at 8 feet minimum distance from any interference source such as a TV, computer monitor, microwave, etc. * The successful reception of the atomic time signal depends on the positioning and location of the clock. Always place the main unit by the window for better reception. * Within concrete wall rooms such as basements or office buildings, the received signal may be weakened. Always place the unit near the window. PM DATE MONTH PM DATE MONTH SETTING TIME AND DATE MANUALLY The time piece date and time can be set by pressing and holding the MODE buttons for 3 seconds in Time/Temperature display with the atomic time receiver disabled. To disable atomic time receiver, press and hold [ — ] key until the atomic reception icon will appear from the display. DISPLAYING TEMPERATURE AND ALARMS *Press MODE to display the ALARM 1 time: *Press MODE again to display the Alarm 2 time: *Press MODE the third time to display the Temperature: Setting the Time *Press MODE : the year digits will flash and year can be set by pressing UP [+] or DOWN [—] key. *Press MODE one last time: the normal time display appears. *Press MODE again: the month digits will flash and month can be set by pressing UP [+] or DOWN [—] key. *Press MODE again :the date digits will flash and date can be set by pressing UP [+] or DOWN [—] key. *Press MODE again :the hour digits will flash and hour can be set by pressing UP [+] or DOWN [—] key. *Press MODE again :the minute digits will flash and minute can be set by pressing UP [+] or DOWN [—] key. *Press MODE again :the temperature display between Celsius or Fahrenheit will flash and measurement unit can be ...