Assessments - 3, GPA: 3.7
(
)
)
|
Facilidade de uso
The MCD360 includes the following features: • 6-channel electronic crossover • Continuously variable crossover frequency with Multiplier Switch • Separate inputs for front, rear and subwoofer • Front and rear high-pass outputs • Non-fade low-pass output • Adjustable low-pass gain • Subwoofer Bass Boost • Remote Subwoofer Level Control • Ground loop isolation input circuit • Gold-plated RCA input/output connectors • Remote turn-on circuit • Power-on LED ABOUT THE MANUAL AND WARRANTY To start enjoying your new Clarion MCD360 Three-Way Crossover, please read the instructions listed in this manual. Keep all instructions for future reference. Please fill out and send in the enclosed warranty card to protect your purchase and aid in warranty service. Also, save your original sales receipt as proof of purchase. TABLE OF CONTENTS Description • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •2 Input/Output Connections and Audio Controls • • • • • • • • • • • • • • •3 Mounting Precautions • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •5 Wiring Precautions • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •6 Applications • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •8 Troubleshooting • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •14 Product Specs • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •15 DESCRIPTION The Clarion MCD360 has the ability to accept one, two or three sets of RCA cables as an input. Both the front and rear outputs of the MCD360 make use of a built-in 18dB per octave electronic crossover that is continuously variable from 32Hz to 8kHz. The subwoofer output also uses an 18dB electronic crossover, and it is adjustable from 45Hz to 250Hz. The dash mounted bass level control provides a convenient way to adjust the bass to suit your taste without having to leave your seat. 2 INPUT/OUTPUT CONNECTIONS AND AUDIO CONTROLS The top panel of MCD360 contains the controls for the crossover and output levels as shown below. Figure 1- 1. Front RCA Input 2. Front Crossover Frequency Control 3. Front/Rear Input Selection Switch 4. Rear RCA Input 5. Rear Crossover Frequency Control 6. Sub Input Selection Switch 7. Sub RCAInput 8. Sub Crossover Frequency Control 9. Frequency Multiplier Switch 10. Sub Bass Boost Frequency 11. Sub Bass Boost Level 12. Ground Input Connector 13. Battery +12V Input Connector 14. Remote Turn-On Input 15. Front RCA Output 16. Front Output Level 17. Rear RCA Output 18. Rear Output Level 19. Phase Switch 20. Sub RCAOutput 21. Sub Output Level 22. Remote Sub Level Connector 23. Remote Sub Level Control 3 • Front High-Pass Crossover Frequency Adjustment -Adjusts the crossover to match your speaker system. The crossover frequency can be adjusted from 32Hz - 400Hz or from 640Hz - 8kHz with the crossover frequency multiplier switch. • Rear High-Pass Crossover Frequency Adjustment -Adjusts the crossover to match speaker your system. The crossover frequency can be adjusted from 32Hz - 400 Hz. • Subwoofer Crossover Frequency Adjustment -Adjusts the crossover to match your speaker system. The crossover frequency can be adjusted from 45Hz - 250 Hz. • Frequency Multiplier Switch -When engaged, this switch increases the crossover frequency by a factor of 20. Example: If the frequency is set for 70Hz, moving the frequency multiplier switch to X20 changes the setting to 1.4kHz. • Output Level Controls - Seperate Front, Rear and Subwoofer Output Level Controls allow you to set the nominal operating level of the crossover. The crossover’s output level ranges can accommodate virtually any brand of amplifier. • Subwoofer Boost Control -The crossover also features a “high-Q” (i.e. narrow frequency band) Bass Boost circuit. It acts much like an equalizer, with adjustable gain (from 0 - +18dB) with a center frequency adjustable from 25Hz -100Hz. Use this feature to tune low-frequency audio response to compensate for a less than ideal subwoofer enclosure design. The added boost produces rich, full bass tones that are normally difficult to reproduce in the car audio environment. Use the Freq dial to set the Boost Freq and the Sub Boost Level dial to set the amount of boost. Note: If Bass Boost is undesired, set Sub Boost Level to 0dB. • Phase Switch -When set to 180 degrees, this switch reverses the phase of the subwoofer output signal. This is used for fine tuning the bass response after the installation is complete. • Power Indicator -The power indicator will light up when the crossover is on. • Front/Rear Input Switch -This switch allows use of a 2 channel input to drive both the front and rear inputs. • Sub Input Switch -This switch allows the signal from the front and rear channels to be directed to the sub input when a dedicated sub input is not available. • Remote Sub Level Control -When the remote sub level control is plugged into the MCD360, the sub output level control on the MCD360 will ...