Assessments - 2, GPA: 3.5
(
)
)
|
Facilidade de uso
When a station is stored, a preset number is assigned to the station. Use the preset number to tune in to a preset station directly. 1 Turn the FUNCTION selector to select theTUNER function, and press the VIDEO 1/5.1 CH/BAND button repeatedly to select the desired band. Then press the UP or DOWN button to select a station. 2 Press the ENTER button to store the station. A preset number assigned to the station, beginning from 1 in consecutive order for each band, is displayed for two seconds. 3 Repeat steps 1 and 2. No more stati&s will be stored if a total of 32 stations have already been stored for all the bands. When the AM tuning interval is changed, all preset stations are cleared. The preset stations have to be set again. PRESET NUMBER TUNING 1 Turn the FUNCTION selector to select theTUNE[? function, and press the VIDEO 1/5.1 CHIBAN[) button repeatedly to select a band. ; . 2 Turn the MUILTI JOGI to select a presel number. To clear a preset station Select the preset number of the station to be cleared. Then, press the ENTER button, and press the ENTER button again within four seconds. The preset numbers of ail other stations in the band with highf?r numbers are decrx?ased by one. When using the remote control Press the TUNER BAND button to select a band, then press the numbered buttons to select a preset number. Example: To select preset number 25, press 2 and 5. To select preset number 7, press O and 7. ENGLISH14 This unit is equipped with the Dolby Pro Logic decoder and also supports the Dolby Digital decoder with the 5.1 ch output terminals. The unit and the center and surround speakers (standard) assure full-scale home theater sound. When playing back discs or video software that have been recorded in Dolby Pro Logic or Dolby Digital Surround, astonishingly realistic sound surrounds the listener to create a new level of audio/visual entertainment. Independent control of the five channels allows the listener to enjoy the same type of sound reproduction experienced in movie theaters. Voices are reproduced in the front and center sound field, while ambient sounds like cars and crowds are reproduced on all sides of the listener for an incredibly lifelike audio/video experience. Please read the following carefully to “tune” the system’s output to match the characteristics of your listening space. Check the following: Before enjoying the DOLBY SURROUND sound, adjust the proper balance of the speaker sound levels (see page 16). Make sure the speakers are properly connected and positioned (see pages 3,4 and 5). . Make sure the TV set and video unit are properly connected (see page 3). . Make sure the disc and video tape, etc., support Dolby Pro Logic or Dolby Digital Surround. SELECTING DOLBY PRO LOGIC The optimal Dolby Pro Logic mode depends on the type and placement of the speakers. It is recommended that the optional A]wa speakers should be used for all channels, for example, the SX-R1 700 for surround speakers, the SX-C1 700 for a center speaker and the SX-AV1 700 for front speakers. Check your current type and placement of the speakers and select the recommended Dolby Pro Logic mode accordingly. The recommended mode Center speaker Larger-size Smaller-size No speaker Surroundspeaker DOLBYPRO DOLBYPRO PHANTOM (Rear speaker) LOGIC-WIDE LOGIC-NORMAL No surround 3 STEREO-3 STEREO . speaker WIDE NORMAL PHANTOM mode: Select this mode when the center speaker is not connected. All center channel signals are redistributed to the left and right channel speakers. 3 STEREO mode: Select this mode when the surround speakers are not connected. TO SELECT A DOLBY PRO LOGIC MODE 1.2 1 1 Press the DOLBY SURROUND button, and turn the MULTI JOG to select the appropriate mode. The mode names are displayed in the order as shown below, rPRO LOGIC -PHANTOM -3 STEREO 1 1 1 2 Press the DOLBY SURROUND button again and hold it down until the center speaker mode to be selected appears. (Except the PHANTOM mode.) “NORMAL” and “WIDE” appear one after the other. wDepending on the sound source or listening condition, surround effect may not be obtained even when the Dolby Pro Logic is set to on. The full Dolby Pro Logic effect cannot be obtained when using the software without 110[~ SIJWIIJ@mark. In this case, use the DSP surround system instead (see page 10). The Dolby Pro Logic system is automatically canceled: -when the DSP system is turned on -when the GEQ system is turned on -when the 5.1 CH function is selected -when headphones are plugged in The Dolby Pro Logic cannot be set to on while headphones are plugged in. i5 ENGLISH ADJUSTING SPEAKER LEVEL BALANCE 1 The unit is equipped with a built-in test signal generator called a noise sequencer for easy balance adjustment of all five channels. The sequencer outputs a noise signal that “travels” from channel to channel, enabling the simple adjustment of sound level to achieve the same apparent loudness, at your listening position, from each channel. 1 Select the Dolby Pro Logic mode ac...