Assessments - 4, GPA: 4.3
(
)
)
|
Facilidade de uso
Contents Safety guidelinesE-2 Important safety instructionsE-2 Safety complianceE-2 Using this handbookE-3 SafetyE-3 Installation: C31 pre-amplifierE-4 Positioning the unitE-4 Connecting to other equipmentE-4 Connecting to a power supplyE-5 Switching the C31 onE-6 Changing the volumeE-6 Selecting an audio sourceE-6 Using your C31 pre-amplifierE-6 Recording an audio sourceE-7 Listening using headphonesE-7 Product configurationE-7 Configuring your C31 pre-amplifierE-8 IntroductionE-8 Adjusting listening settingsE-8 Using the remote controlE-9 Installation: P35 and P1 power amplifiersE-10 Positioning your power amplifierE-10 Connecting to other equipmentE-10 Remote switchingE-11 Connecting loudspeakersE-12 Connecting to a power supplyE-13 Using your power amplifierE-14 Technical specificationsE-15 Remote-control codesE-16 TroubleshootingE-17 GuaranteeE-17 On-line registrationE-17 Environmental matters: This handbook is printed in the U.K. on recycled paper, and is itself fully recyclable and biodegradeable. The paper used is from the ‘Revive’ range of papers, manufactured in the U.K. by Robert Horne. In Revive, 75% of the paper is de-inked post-consumer waste, with the remaining 25% being mill broke and virgin fibre. The recycled pulps used in the production of this paper are a combination of Totally Chlorine Free (TCF) giving zero AOX and Elemental Chlorine Free (ECF) giving a resultant AOX level of less than 0.5Kg per 1000Kg of pulp. English C31/P35/P1 E-5 Recording loops The C31 is equipped with two recording loops, for use with recording devices (such as cassette decks, MiniDisc players, VCR’s etc.) 7 TAPE/PROC RECORD OUT – Connect these output sockets to the input sockets of your recording device (usually labelled RECORD or IN). 8 TAPE/PROC PLAY IN – Connect the output sockets of your recording device (usually labelled PLAY or OUT) to these inputs. If you do not have a recording device, you can use this input for other (line-level) equipment, such as a CD-player, tuner, VCR, etc. 9 VCR/TAPE2 RECORD OUT – These output sockets can be connected to the input sockets of a second recording device. bk VCR/TAPE2 PLAY IN – Connect the output sockets of your second recording device to these inputs. Alternatively, this input may be used for other (line-level) equipment such as a CD-player, tuner, etc. Power-amplifier connections 456 PRE OUT – The recommended connection between the C31 pre-amplifier and your power amplifier depends on both the distance between the two and the type of power amplifier that you are using. There are three options: 1. If the cables to be used to connect the C31 to the power amplifier are less than 3m long, we recommend connecting the DIRECT sockets 6 to the input sockets of your power amplifier. On the P35 and P1, connect to the socket(s) labelled AUDIO IN. If the cables to be used to connect the C31 to the power amplifier are 3m or longer, then the connection to use depends on the type of power amplifier you have. 2. If your power amplifier does not have balanced inputs (such as the P35), use the BUFFERED outputs 5. On the P35, connect to the sockets labelled AUDIO IN. 3. If your power amplifier provides balanced inputs (such as the P1), use the balanced outputs 4. On the P1, connect to the sockets labelled BALANCED AUDIO IN. The buffered and balanced outputs are designed to drive longer cables than the direct output, but you cannot damage either your C31 or your power amp. by using the “wrong” connection type. Other connections Phono earth terminal – For connecting your turntable earth lead (if required). Note that this terminal must not be used as a safety earth. 3 TRIG OUT and REMOTE IN (12V in and out) – These connections are intended for use in multi- room installations. < TRIG OUT: This output provides a 12V signal whenever the unit is switched on (i.e., not off or in stand-by). This signal can be used to switch on power amplifiers (or other equipment) connected to the C31, as they will come on when the C31 is activated. This is useful if the power amplifier is remote from the C31, or otherwise difficult to access. < REMOTE IN: This allows remote-control signals to be received by the C31 if the remote sensor is covered (or otherwise not ‘visible’ to the remote-control). An external sensor (such as the Xantech ‘Dinky Link’™) is used to receive the signals from the remote-control, which are then fed to the C31 (into this input) using a suitable cable. In normal use there is no need to make any connections to either of these sockets. Connecting to a power supply Mains lead The appliance is normally supplied with a moulded mains plug already fitted to the lead. Check that the plug fits your supply and that your mains supply voltage agrees with the voltage setting (115V or 230V) indicated on the rear panel of the unit 2 before plugging in. If your mains supply voltage or mains plug is different, please consult your Arcam dealer immediately. Plugging in Push the IEC-plug of the power cab...
Este manual também é adequado para os modelos :receptor e amplificador - C31 (1.2 mb)
receptor e amplificador - P1 (1.2 mb)
receptor e amplificador - P1 (1.2 mb)