Assessments - 2, GPA: 4 ( )

Fabricante : Channel Plus Arquivo Tamanho: 176.32 kb Arquivo Nome : Língua de Ensino:

Then connect a video source. Third, apply power and select an unused channel for the 5115 picture to appear on all the televisions. Installation Step One Locate the incoming or antenna (Usually found on the side Remove the lock screw injector and slide the cover Use the mounting holes affix the channel injector to © 1999 Mount the injector within 4” of the splitter Use mounting holes on the bottom plate to attach channel injector to the wall Disconnect the incoming CATV or antenna feed from the existing splitter and attach it to the channel injector as shown. Before Out to TVs Incoming CATV or antenna coax Now attach the supplied coax jumper back to the existing splitter and tighten all connections with a 7/16” wrench. After Mount the injector within 4” of the splitter Supplied coax jumper goes back to splitter © 1999 Out Incoming CATV or to TVs antenna coax Installation Step Two The wall plate Run a line of Cat and connect wires note: When using quad wire connect wires only to pins 1, 2, 5 and 6. Leave the resistor in place at pins 3 and 4. At the channel injector, connect Cat 5 wire as shown. Follow the color coding on the screw terminal. Bl/W Blue Org/W Orange Gr/W Green Br/W Brown Green Red Black Yellow pin 1 2 3 4 5 6 7 8 Default resistor pin 1 2 5 6 note: When using Cat 5 wire remove the default resistor that is in pins 3 and 4 of the wall plate screw terminal Side view of wall plate blue/white pin 1 © 1999 When using only quad wire use positions 1, 2, 5 and 6 and follow color coding. blue/white run the Cat 5 wire pin 1 through the grommet at the bottom of the injector Connecting Source Using any video plate as shown. wire to the channel * Optional loop © 1999 Audio/video connections Cat 5 wire Coax jumper Out to TVs out television or a/v receiver Antenna or CATV feed Video source * Use the NORM / LOOP switch to select the proper setting application. Norm/Loop switch NORM: Select NORM when a television or a/v receiver is not used at the wall plate to view the connected source. LOOP: Select LOOP when a television or a/v receiver is connected to the wall plate to view the connected source Applying Step Three The 5115 series to the system. Use only one method Method One: Apply power directly to power supply. Power plug Lower right of channel injector © 1999 power supply The green LED in the upper right corner of the injector will be lit showing power is active. (See power length requirements page 8) Method Use the power injector to apply power 5 or quad wire the power injector. Connect the plug the power supply power injector pin 1 blue/white cut Cat 5 wire power plug power supply The green LED in the upper right corner of the channel injector will be lit showing power is active. Method Three: Apply power directly at the wall plate. The green LED in the lower right corner of the wall plate and upper right corner of the channel injector will be lit showing power is active. power plug Power Length Method One Up to 300’ of Cat 5 or quad wire maxi...

Baixe o seu

Para fazer o download, introduza 2 dígitos :