Assessments - 3, GPA: 4.7
(
)
)
|
Facilidade de uso
- C-HDMI-3GHDSDI x 1 - Power Adapter (+5VDC, 4A) x 1 - User’s Manual x 1 1.6 Before Installation . Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction. . Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity. . Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire. . Do not twist or pull by force ends of the optical cable. It can cause malfunction. 1. C-HDM-3DHDSDII mainly checks the audio channel in audio group 1&2 or 3&4. Please adjust DIP switch pin 3 for setup. 2. Some HDMI equipped TV may not be able to decipher multiple channel audio, and therefore set DIP switch pin-2 to ON(.) to get stereo audio work and then check if multiple channel support is available. 3. While DIP Switch pin-4 is set to OFF(.), 3G Level B will be automatically converted to Level A. 4. C-HDMI-3GHDSDI supports only audio sample frequency 48kHz. 5. While stereo audio is chosen, CH 1 & 2 of Group 1 or 3 are output. 1.7 Panel Description 1.7.1 Bottom Panel (DIP SWITCH) A 4-pin DIP switch is used for user interface, and users can access this switch from the bottom of the unit. Output formats, video patterns, SD Pedestal, SD Wide, PAL mode, YPbPr / RGB, SD component or SD composite, YC on/off etc. PIN # 1 2 3 4 OFF . DVI Mode Stereo Audio Group 3 & 4 Update EDID ON . HDMI 7.1 Channel Audio Group 1 & 2 Default EDID 1.7.2 EDID Learning To learn EDID follow these steps: - Turn off C-HDMI-3GHDSDI and set the Pin 4 of DIP Switch to OFF - Connect the TV/Monitor through HDMI port to C-HDMI-3GHDSDI and turn on C-HDMI-3GHDSDI - The LED of C-HDMI-3GHDSDI will dim and light again, which indicates the EDID learning process is finished - Connect C-HDMI-3GHDSDI to the HDMI Source through HDMI cable Section 2: Specifications Item Description Units C-HDMI-3GHDSDI Unit Description HDMI to 3G/HD/SD-SDI Converter SDI Standards 3G-SDI, HD-SDI, SD-SDI Auto 3G/HD/SD-SDI Detection Yes Video Support 3G: 1080p @50/59.94/60Hz (4:2:2), 1080p @24/25/30Hz (4:4:4), 1080i @50/59.94/60Hz (4:4:4), 720p @24/25/50/59.94/60Hz (4:4:4) HD: 720p @50/59.94/60Hz, 1035i @50/59.94/60Hz, 1080i @50/59.94/60Hz, 1080p @24/30Hz SD: NTSC @59.94Hz, PAL @50Hz Video Bandwidth 2.970Gbps, 2.970/1.001Gbps Output Signal 3G-SDI: SMPTE 424M/425M HD-SDI: SMPTE 292M, 296M SD-SDI: SMPTE 259M Input Signal HDMI Audio Mode 7.1 / 5.1 / Stereo Eye Pattern Characteristics Extra low alignment jitter 0.05.i at HD Cable Equalization 3G-SDI: up to 60m (200 feet) HD-SDI: up to 150m (500 feet) SD-SDI: up to 300m (1000 feet) Loop Out 2 equalized and re-clocked SDI Loop Outs Audio Support Yes Output HDMI x 1 Input BNC x 2 (SDI) BNC Connector 3G 75. inter-locked socket HDMI Connector Type A (19 pin female) DIP Switch 4 pin (output format / audio format / audio group / 3G level) Dimensions (L x W x H) 6.3” X 4.3” x 1” Power Supply 5V 4A DC Power Consumption 3 Watts (max) Environmental Operating Temperature 32. ~ 104.F (0. to 40.C) Storage Temperature -4. ~ 140.F (-20. ~ 60.C) Relative Humidity 20~90% RH (no condensation) 1.1 Supported Resolutions 3G-SDI Output 1080p @ 60/59.94/50Hz SMPTE 425M (4:2:2) 1080p @ 30/25/24Hz SMPTE 425M (4:4:4) 1080i @ 60/59.94/50Hz SMPTE 425M (4:4:4) 720p @60/59.94/50Hz SMPTE 425M (4:4:4) HD-SDI Output 525p @ 59.95Hz SMPTE 293M, ITU-BIT.1358 625p @ 50Hz ITU-BT.1358 720p @ 50Hz SMPTE 296M -3 720p @ 60 / 59.94Hz SMPTE 296M -1, -2 1080i @ 25Hz SMPTE 274M -6 1080i @ 30 / 29.97Hz SMPTE 274M -4, -5 1080p @ 24 / 23.98Hz SMPTE 274M -10, -11 1080p @ 25Hz SMPTE 274M -9 1080p @ 30 / 29.97Hz SMPTE 274M -7, -8 SD-SDI Output NTSC PAL B, D, G, H, I avenview-logo-whiteBG_Final.png Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the Avenview hardware, software, or other products and documentation provided herein. Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability, function or design. With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties regarding such products, including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement. ...