Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
1 kHz) ±1 dB, 20 Hz - 20 kHz (1 watt output) ±1 dB, 20 Hz - 20 kHz (0.775 Vrms output, 600 fl load) (Ref 1 kHz) <0.05%, 20 Hz - 20 kHz (rated output power, 30 kHz low-pass filter) <0.05%, 20 Hz - 20 kHz (0.775 Vrms output, 600 fl load, EQ flat, compressor/-limiter off, 30 kHz low-pass filter) >80 dB below rated output power, A-weighted >75 dB below 0.775 Vrms output, A-weighted, EQ off, compressor/limiter off DESCRIPTION The Altec Lansing 1707C/I715C Mixer/Power Amplifier is a six channel user-configurable mainframe amplifier. By selecting from the large array of system component options, the 1707C/1715C can become a six-in/one-out microphone mixer/amplifier or a one-in/six-out distribution preamplifier. The basic mainframe combines a fully protected 75-watt (for the 1707C) or 150-watt (for the 1715C) power amplifier with six ports which can be input or output. Multiple 1707C/1715C mainframes can be linked together for situations where more then six input/output ports are required. Built-in features include a trap-door on the top panel for easy access into the unit, compressor/-limiter, low and high frequency shelving equalizers, muting, remote volume control capability, and a tone generator which produces four different sounds. Input Modules: The Altec Lansing 1780A/-1780AT Input module and the 1781A/1781AT Programmable Input module accept either mic or line level signals through a wide variety of connector interfaces. Output Modules: The Altec Lansing 1783 Line Output module allows the user to interface with other professional equipment. The Altec Lansing model I707C/1715C mixer/power amplifier systems respond to most design tasks with the ease and versatility of systems costing much more. As a result, it is the choice for use in professional installations requiring high quality, flexibility in design, and low cost. 1707С/1715С Specifications (cont'd) Continuous Average Power: 1707C: 1715C: Maximum Midband Output Power: 1707C: 1715C: Power Bandwidth: Direct Output: Intermodulation Distortion: Direct Output: Damping Factor: Direct Output: Rated Output Level: Direct Output: 1707C: 1715C: Preamp Output: Transformer Output: 1707C: 1715C: Equalization: Bass: Treble: Compressor/Limiter: Threshold: Compression Ratio: Release Time: Tone Generator: Tones: Control: Level Adjustment: Protection System: Amplifier: Load: Front Panel Controls: Input: Compressor/Limiter: 75 watts 150 watts (Ref. 1 kHz at 1% THD) 100 watts 175 watts (Ref. 1 kHz at rated output) >20 Hz - 20 kHz (SMPTE 4:1) <0.1% at rated power >40, 20 Hz - 1 kHz (Ref. 1 kHz) (unbalanced) 24.5 Vrms/8 ft load 24.5 Vrms/4 ft load (unbalanced) 0 dBm, 600 ft min. load (balanced) 17.4 Vrms/4 ft load 25.0 Vrms/8 ft load 70.7 Vrms/66.6 ft load 25.0 Vrms/4.2 ft load 34.6 Vrms/8 ft load 70.7 Vrms/33.3 ft load (Shelving type) ±12 dB at 100 Hz ±12 dB at 10 kHz Feedforward Topology -20 dB to +20 dB Continuously variable (Ref. 100 mVrms on Link input) 1:1 to »:1 Continuously variable 50 msec to 5 sec. Continuously variable Electronically produced Buzzer, siren, single-tone chime, and repeating tone chime All tones are initiated by external switch closures Rear panel • Short circuit current limiting • Over voltage limiting • Thermal sensing • Spurious oscillatory protection • Low AC line sensing • Output DC detection • Subsonic detection • Tum-on/off transients (=3 secs) 6 - Input Level adjust 1 - Release Time adjust 1 - Threshold adjust 1 - Compression Ratio adjust EQ Controls: Output: Miscellaneous: 1 - On/Off switch 1 - Bass adjust 1 - Treble adjust 1 - EQ In/Defeat switch 1 - Master Level adjust 1 - AC Power switch Rear Panel Controls: Tone Generator: 1 - Output Level adjust Front Panel Indicators: 6 - Green LED’s (Nominal Input) 6 - Red LED’s (Peak Input) 1 - Red LED (Main Output clip) 1 - AC Power ON Connectors: Amplifier Input: Link Input: Battery: Amplifier Output: Preamp Output: Link Output: Mute and Tone Generator: 1 - RCA phono receptacle 1 - RCA phono receptacle 1 - 3-terminal barrier strip 1 - 7-terminal barrier strip 1 - RCA phono receptacle 1 - RCA phono receptacle 7 - Screw terminals Power Requirements: AC Mains: Battery: 1707C 1715C Power Consumption and Heat Produced: 1707C: 75 watts output: 25 watts output: 1715C: 150 watts output: 50 watts output: Operating Temperature Range: (Ref. 1 kHz, rated output with no modules installed) 100/120/200/220/240 VAC, 50/60 Hz. ±48 VDC bipolar 1.5 amps maximum 3.0 amps maximum 165 w consumed, 306 BTU/hour 130 w consumed, 357 BTU/hour 320 w consumed, 578 BTU/hour 230 w consumed, 612 BTU/hour Up to 50°C (122°F) Dimensions Width Height Depth 19 inches (48.3 cm) 5'A inches (13.3 cm) 13 inches (33.0 cm) Net Weight 1707C 1715C 25 lbs. (11.4 kg) 32 lbs. (14.5 kg) Finish Color: Black Accessories Included with Mainframe: 1 - Operating/Service Instructions for Mainframe, 1780A/AT, 178 WAT and 1783 1 - Pream...
Este manual também é adequado para os modelos :receptor e amplificador - 1715C (1.73 mb)