Assessments - 3, GPA: 5
(
)
)
|
Facilidade de uso
Remove trim ring and install supplied #1 x 7/32” Phillips head screw through left side of mounting frame into faceplate. Press or any other button (except eject) to turn the unit on. Inserting a disc will turn the unit on automatically. Press and hold to turn the unit off. Press MODE to select between AM/FM, CD player, auxiliary input and USB. Modes of operation are indicated in the display. Note: CD mode will not appear unless a CD is inserted. Insert 3.5 mm plug to connect your portable audio device. The steering wheel interface input located on the back of the head unit allows connection to the Pacific Audio Corporation SWI-PS interface module (sold separately). Visit com for details. To configure steering wheel controls, follow the instructions provided with the PAC SWI-PS interface module. After installing the interface module, insert the module's 3.5mm jack into the port on the back of the head unit. Adjust volume using rotary encoder (00-46). Press MUTE to silence the audio. “MUTE” will flash in the display. Press MUTE again to cancel. Press EQ to enter EQ setup menu, then use the rotary encoder to select between POP, JAZZ, CLASSIC, BEAT, ROCK and FLAT (default) equalization curves. Any adjustment to the Bass or Treble settings automatically cancels the current EQ curve (if one is selected). Press to RESET the unit upon initial installation or if abnormal operation occurs. The reset button is located behind the faceplate. Press DISP to select between clock and different types of information, such as radio frequency, CD track or MP3/USB song information. With the unit on, press and hold DISP until the clock begins to flash, then release. Press TUNE nn to adjust the hours and TUNE ll to adjust the minutes. Press DISP momentarily to save the selected time. XDM6350 OPERATION 12/24-hour Clock Setup Menu General Operation The clock will display 12-hour AM/PM time in USA frequency spacing mode (PM 10:00). In European frequency spacing mode, the clock will display 24-hour time (22:00). Press and hold AUDIO/MENU for more than 3 seconds to access the setup menu, then press AUDIO/MENU to cycle through menu options. When desired option appears in the display, rotate the rotary encoder left/right to adjust or activate the desired function. Press ESC to exit the menu at any time. Setup Menu Menu Function Options Action Auto Station Store AUTO STORE Press SELECT to seek and save 6 strong stations in the current band. Note: This option only appears in Tuner mode. Loudness Curve LOUD OFF Disables the loudness function. LOUD ON Enables the loudness function. Activating this feature will enhance the bass and treble frequencies when listening to music at low volumes. Tuner Frequency Spacing FREQ USA Programs unit to USA tuner spacing. (200kHz for FM and 10kHz for AM) FREQ EUR Programs unit to European tuner spacing. (50kHz for FM and 9kHz for AM) Clock Display CLK OFF Programs unit to not display the clock when the power is off. CLK ON Programs unit to display the clock when the power is off. Auxiliary Input AUX ON Enables the front panel 3.5mm auxiliary input. AUX OFF Disables the auxiliary input. Beep Confirmation BEEP OFF Disables the confirmation beep. BEEP ON Enables the confirmation beep. Programmable Turn On Volume PRO-VOL # Programs unit to turn on at a specific volume (default is OFF). Local/Distance Tuning LOCAL OFF Activates distance tuning. LOCAL ON Activates local tuning for strong station reception only. Power on Message MSG OFF Disables power on message. MSG ON Enables power on message to be displayed. Scrolling Option SCROLL ONCE Programs unit to scroll once, then show the first 10 characters on the display. SCROLL ON Programs unit to scroll continuously. SCROLL OFF Programs unit to show the first 10 characters on the display. Illumination Dimmer DIMMER HI Programs unit to the brightest illumination level. DIMMER MED Programs unit to the middle illumination level. DIMMER LOW Programs unit to the dimmest illumination level. Demonstration Mode DEMO OFF Disables the demonstration mode. DEMO ON Enables the "FULL SPEED USB INPUT " message. XDM6350 OPERATION General Operation Escape Audio Bass Treble Balance Fader Subwoofer Source Volume Level Press ESC to exit any menu adjustment mode. Press AUDIO/MENU momentarily to select between Volume(default), Bass, Treble, Balance, Fader, Subwoofer and Source Volume Level. VOLUME BASS TREBLE BALANCE FADER SUBWOOFER SOURCE LEVEL Press AUDIO/MENU until BASS appears, then press SELECT to confirm. Rotate encoder left/right to adjust (-6 minimum / +6 maximum). Press AUDIO/MENU until TREBLE appears, then press SELECT to confirm. Rotate encoder left/right to adjust ( -6 minimum / +6 maximum). Note: Any adjustment to the Bass or Treble settings automatically cancels the current EQ curve (if one is selected). Note: Bass and Treble settings are retained for each mode individually. Press AUDIO/MENU until BAL appears, then press SELECT to confirm. Rotate encoder left/...