Assessments - 2, GPA: 3
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
(aabove) 2. Set the input signal to “ANALOG ” in “Input signal settings”. (apage 13) nUsing SPEAKERS B aRefer to page 8 for connecting SPEAKERS B. Sound is output from the speaker connected to the FRONT B terminals on this unit. To turn off the sound from the speaker connected to the A terminals, press [SPEAKERS A] and cancel . If you select SPEAKERS B only: • Playback is in stereo (2-channel). • When a multi-channel source is played with digital connections, “2CH MIX” is displayed and the sounds intended for all the speakers are played through the front speakers. When DVD ANALOG 6CH is selected, the sound from the front 2 channels is output. If you select SPEAKERS B only, the following are set automatically irrespective of settings selected in speaker settings (apages 12, 21). • Speaker size: LARGE • Subwoofer: NO (Bass is output from the front speakers.) nUsing headphones Press to turn all the speakers off. Reduce the volume and connect the headphones. The sound from the headphones automatically becomes 2CH MIX. When DVD ANALOG 6CH is selected, the sound from the front 2 channels is output. Playback 1 Turn on. 2 Turn SPEAKERS A on. -When using a BI-WIRE connection- • If you use a BI-WIRE connection for the front speakers, select “BI-WIRE ” in “Bi-wiring settings”. (apage 12) 3 Select input. • If “DVR ” is selected, “DVD RECORDER ” scrolls once on the display. • If you watch a DVD etc., change to video input on the television. n Using a DVD recorder with built-in VCR To play a DVD: Select “DVR ” To play a video cassette: Select “VCR 1 ” 4 Start play of the source. • The unit sets the sound mode (stereo or multichannel) to suit the input signal. • Select the desired surround effects. (apage 15) 5 Adjust the volume. • When you finish listening Be sure to reduce the volume and press [8, POWER] to turn the unit to standby. POWER SPEAKERS A B INPUT SELECTOR VOLUME DOWN UP VOL- 50dB (MIN) (MAX) Various kinds of playback A -When using a BI-WIRE connection Using Surround effects Using Surround effects Adding surround effects. • This unit does not automatically recognize the Dolby Digital Surround EX signal. The surround back channel is added by using Dolby Pro Logic . • Dolby Pro Logic , DTS NEO:6 and SFC modes remain in effect until you change them. • You cannot select Dolby Pro Logic , DTS NEO:6 and SFC at the same time. • If you make any settings in “Speakers combination settings”, “Surround back speaker settings” or “Speaker settings” (apages 12, 21) when using surround effects, the surround effects are canceled. aRefer to page 17 for information about limitations on using surround effects. Using Dolby Pro Logic Using the Sound Field Control (SFC) Enjoy stereo (2-channel) sources through multiple channels. (If you have Enjoy an enhanced sound experience with greater presence and spread not connected surround back speakers, play is in Dolby Pro Logic by using these SFC modes with Dolby Digital, DTS, PCM or analog stereo (apage 12 “Speakers combination settings”).) sources. Choose from the following modes. You can also enjoy Dolby Digital 5.1-channel and DTS 5.1-channel sources in 7.1(6.1)-channel. Before use Connections Settings nAfter pressing [MUSIC] or [AV/MOVIE], the mode changes even if you press . Select. LIVE: Imparts the reflection and spread of a large concert hall. POP/ROCK: Best suited for dynamic sound such as pop and rock music. VOCAL: Best suited to enhance vocals. JAZZ: Recreates natural sound ambience and direction. DANCE: Enjoy a dance hall like audio effect. Select. DRAMA: Best suited for dialogues in drama movies. ACTION: Best suited for action movies with impact. SPORTS: Enjoy a feeling like being at a live sporting event. MUSICAL: Enjoy a feeling like being at a live musical performance. GAME: Enjoy games with greater audio impact. Select. MOVIE: Use this mode when playing movies. MUSIC: Use this mode when playing music. GAME: Enjoy games with greater audio impact. • You can only use “GAME ” mode when the input signal is 2-channel stereo. -When “1 SPKR ” is selected in “Surround back speaker settings” (apage 12) and there is a Dolby Digital 5.1-channel, DTS 5.1-channel, or Dolby Digital Surround EX sources- Select. DOLBY EX: Use this mode when playing movies. MUSIC: Use this mode when playing music. . To cancel . You can make further adjustments to the effect of “MUSIC ” mode. (apage 18) Using DTS NEO:6 Use DTS NEO:6 to play 2-channel sources through multi-channels. (If all speakers are set to “LARGE ” in “Speaker settings” (apage 21), there is no output from the subwoofer.) You can also enjoy Dolby Digital 5.1channel and DTS 5.1-channel sources in 6.1-channel. Basic Operations Reference Select. CINEMA: Use this mode when playing movies. MUSIC: Use this mode when playing music. . To cancel . You can make further adjustments to the effect of “MUSIC ” mode. (apage 18) When the digital input S indicator lights with Dolby Digital 2-channel and DTS 2-channel sources, you can only use “CINEMA ” m...