Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
ol«aM iMd ihM* mtlruclion» corrc>l»i«iy A HB A / ~ \ DO NOT OPfN / • \ CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL A SA 1965 A SA 1966 The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The serial number of this product may be found on the bottom of the unit. You should note the serial number of this unit in the space provided and retain this book as a permanent record of your purchase to aid identification in the event of theft. Model No. _ Serial No. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CONTENTS FEATUREE....................................................................1 INSTALLATION.............................................................2 SPECIFICATIONS..........................................................5 STANDARD ACCESSORY.............................................5 PREFACE The Wireless Tuner Unit WX-RP800 is designed to be used with the Diversity Receivers WX-RP810. NOTE Please refer to Operating Instructions of Diversity Receiver WX-RP810/WX-RP820 for the MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS of this unit. INSTALLATION Caution : Please pull out the AC power cord of Diversity Receiver WX-RP810 from the AC outlet before installation of this unit. • Mounting the Tuner Unit into the WX-RP810 1. Remove 5 screws and remove the upper cover. 2. Remove 3 screws and remove the blank panel (TUNER 2 side). Mounting the Tuner Unit into the Diversity Receiver and tighten 2 screws (provided). 4. Disconnect the connectors CN105, CN106, JK205 (Yellow) and JK206 (Blue) of Diversity Receiver. CN105 CN106 JK206 JK205 5. Connect these connectors to Tuner Unit respectively. 6. Install the upper cover and tighten 5 screws. -3- • Replacement the tuner unit 1. Remove 5 screws and remove the upper cover, and the disconnect the connectors CN105, CN106, JK205 (Yellow) and JK206 (Blue). 2. Remove 2 screws and replace the Tuner Unit. 3. Tighten 2 screws and connect these connectors to the tuner unit. 4. Install the upper cover and tighten 5 screws. -4- SPECIFICATIONS Power Source Oscillator Receiving System Receiving Sensitivity Squelch Sensitivity Signal to Noise Ratio Diversity Selection Noise Residual Noise Distortion Output Level Pilot Tone Frequency Ambient Operating Temperature Dimensions Weight Weight and dimensions indicated are approximate. Specifications are subject to change without notice : Supplied from specified Diversity Receiver WX-RP810 or WX-RP820, 12V DC, 220mA(Max.) : Crystal-controlled PLL Synthesizer : Super Heterodyne : More than S/N 30dB (20 dB^V Input, ±12.5 kHz FM) : Less than 18 dB^V More than 60 dB (60 dB^V Input, ±5 kHz FM A-weighted) More than S/N 40dB (60 dB^iV Input, ±5 kHz FM) Less than 30^iV Less than 1% (60 dB^V Input, ± 12.5 kHz FM) -27 dB (±5 kHz FM) 32.927 kHz 14°F - 122° F (-10°C - +50®C) 5-1/2"(W) x 1-1/4"(H) x 5-5/16"(L) (140(W)x 33(H) x136(L) mm) : 0.99lbs (450g) STANDARD ACCESSORY Screws............................................. .2 pcs -5- Panasonic Broadcast & Television Systems Company Division of Matsushita Electric Corporation of America RAMS A/Professional Audio Systems Executive Office: One Panasonic Way, Sscaucus. New Jersey 07094 6550 Kate I la Ave. Cypress, CA 90630 (714) 373-7277 N0693-0 VWA8QA2963AN Printed in Japan (Ñ) 22...