Assessments - 1, GPA: 3
(
)
)
|
Facilidade de uso
The unit provides 5 DSP preset modes. 1 Press DSP. 2Within 6 seconds, turn MULTI JOG to select the desired DSP mode. The “DSP” and “S” (surround speakers) indicators light up. DISCO HALL LIVE CHURCH MOVIE When the music source is monaural The DSP system may not work effectively depending on the DSP mode selected. To cancel the selected mode Press DSP to display the DSP mode name, and press the button again within 6 seconds. “DSP OFF” appears on the display. To select with the remote control 1 Press DSP. 2Within 6 seconds, press JOG +or -repeatedly until the desired DSP mode is displayed. NOTE • DSP cannot be turned on when the surround speakers are set to “NONE”. • DSP is automatically canceled when SURROUND is turned on, and vice versa. SOUND ADJUSTMENT DURING RECORDING The output volume and tone of the speakers or headphones may be freely varied without affecting the level of the recording. ENGLISH 9 SOUND En BASIC OPERATIONS BASIC OPERATIONS SELECTION OF AUDIO/VIDEO SOURCE FUNCTION FUNCTIONENTER TUNING INPUT MODE JOG +,- TV/VIDEO INPUT MODE 1Turn FUNCTION to select the program source. The function changes in the following order. FM AM DVD CD AUXTAPEVIDEO 1VIDEO 2 The actual source selected (except FM and AM) depends on the equipment connected to the input terminals on the rear panel of the unit. For example, if an MD player is connected to the VIDEO 1/ MD terminals, select VIDEO 1 to listen to the MD playback sound. To select with the remote control Press FUNCTION repeatedly. 2Start the selected program source. 3 Adjust the sound. SELECTION OF VIDEO SOURCE While selecting a program source which does not contain video input (such as a CD player), you can select a video source separately to be viewed on the TV. 1 Press FUNCTION repeatedly to select FM, AM, CD, AUX or TAPE. 2 Press TV/VIDEO. 3 Press JOG + +++++, - -----repeatedly. The video source to be output through the MONITOR VIDEO OUT jack changes in the following order. M-OUT V1 M-OUT V2 M-OUT DVD M-OUT V1: Video image of the equipment connected to the VIDEO 1/MD terminals can be viewed on the TV. M-OUT V2: Video image of the equipment connected to the VIDEO 2/LD/TV terminals can be viewed on the TV. M-OUT DVD: Video image of the equipment connected to the DVD terminals can be viewed on the TV. TO CHANGE A DISPLAYED NAME FOR THE VIDEO 1 AND VIDEO 2 FUNCTION When the VIDEO 1 function is selected, VIDEO 1 is displayed initially. It can be changed to MD. While pressing ENTER, press INPUT MODE. The displayed name for the VIDEO 2 function can be changed to VIDEO 2, LD or TV. Select VIDEO 2 function. While pressing ENTER, press INPUT MODE. TO SELECT “ANALOG” OR “DIGITAL” MODE OF THE DVD, VIDEO 1 OR VIDEO 2 FUNCTION Press INPUT MODE when the DVD, VIDEO 1 or VIDEO 2 function is selected. The selected mode “ANALOG” or “DIGITAL” appears on the display. In DIGITAL mode: Equipment connected to the DIGITAL IN OPTICAL (DVD) terminal is selected as a source for the DVD function, equipment connected to the DIGITAL IN OPTICAL (VIDEO 1) for the VIDEO 1 function, and equipment connected to the DIGITAL IN COAXIAL (VIDEO 2) for the VIDEO 2 function. In ANALOG mode: Equipment connected to the DVD terminals is selected as a source for the DVD function, equipment connected to the VIDEO 1/MD for the VIDEO 1 function, and equipment connected to the VIDEO 2/LD/TV for the VIDEO 2 function. 10 ENGLISH WHEN THE “OVER LEVEL” INDICATOR LIGHTS UP When input analog signals from the connected equipment are too high to accept, the OVER LEVEL indicator lights up. In this case, adjust the input level so that the indicator disappears. To lower the sound level of the connected source When the analog sound level of the connected source is higher than that of the FM and AM functions, adjust it as follows. 1 Select the function to be adjusted. Turn FUNCTION and play the source. 2 Press TUNING M MMMMMrepeatedly. The level is decreased as follows. 0 dB –6 dB –12 dB To restore the previous level, press TUNING Nrepeatedly. • When the analog output of the CD player or DVD player is 2 Vrms, set the level to –6 dB. RECORDING AN AUDIO SOURCE FUNCTION FUNCTION INPUT MODE 1 Select the program source to be recorded. Turn FUNCTION (or press FUNCTION repeatedly). 2 Set the tape deck or MD recorder to recording mode. 3Start the selected program source. NOTE • Any sound control system has no effect on recording (see page 9). • Input sound through the DIGITAL IN terminals cannot be recorded. When recording the sound from the DVD, CD, MD or LD player, connect the analog AUDIO OUT terminals of the player to the corresponding AUDIO IN terminals of the receiver. The sound will be recorded in 2 ch stereo. • Input sound from the tape deck connected to the TAPE IN terminals cannot be recorded. BASIC OPERATIONS En ENGLISH 11 RADIO RECEPTION RADIO RECEPTION MANUAL TUNING MULTI JOG FUNCTION 0-9,+10 ENTER TUNER MODE C i/k/j/l ENTER TUNING INPUT MODE SHIFT POWER 6STANDBY/ON 1Turn FUNCTION to select the desired band; FM o...
Este manual também é adequado para os modelos :receptor e amplificador - AV-NW30, AV-NW31 (494.33 kb)