Log:
Assessments - 2, GPA: 4.5 ( )

Instruções de Operação Sony, Modelo STR-DA5300ES

Fabricante : Sony
Arquivo Tamanho: 8.88 mb
Arquivo Nome : 3209635114.pdf
Língua de Ensino: en
Fotos e especificações  Sony  STR-DA5300ES
Ir para baixar



Facilidade de uso


Therefore, although it may result in a setting contrary to the above explanation, we recommend that you play back multi-channel surround encoded software and select the setting that provides a good sense of spaciousness and that best succeeds in forming a cohesive space between the surround sound from the surround speakers and the sound of the front speakers. If you are not sure which sounds best, select “BEHD” and then use the speaker distance parameter and speaker level adjustments to obtain proper balance. Making settings with the Speaker Pattern menu 1 2-5 76GB 1 Press AMP MENU to display the GUI menu on the TV screen. If “GUI MODE” is not displayed in the display window of the receiver, follow the steps given in “7: Operating the receiver using the GUI (Graphical User Interface)” (page 41). 2 Press V/v repeatedly to select “Settings,” then press or b. The Settings menu list appears on the TV screen. 3 Press V/v repeatedly to select “Speaker,” then press . 4 Press V/v repeatedly to select “Speaker Pattern,” then press . Select “Speaker Pattern” according to the speaker system which you are using. You do not need to select the speaker pattern after auto calibration. 5 Press V/v repeatedly to select the speaker pattern you want. Making settings with the Test Tone menu 1 2-6 1 Press AMP MENU to display the GUI menu on the TV screen. If “GUI MODE” is not displayed in the display window of the receiver, follow the steps given in “7: Operating the receiver using the GUI (Graphical User Interface)” (page 41). 2 Press V/v repeatedly to select “Settings,” then press or b. The Settings menu list appears on the TV screen. 3 Press V/v repeatedly to select “Speaker,” then press . 4 Press V/v repeatedly to select “Test Tone,” then press . continued 77GB Advanced Speakers Setting Up You can select the test tone type. 5 Select the speaker you want to adjust, then press . The test tone is output from each speaker in sequence. 6 Adjust the parameter using V/v, then press . Tips • To adjust the level of all speakers at the same time, press MASTER VOL +/–. • The adjusted value is shown on the display during adjustment. When a test tone is not output from the speakers • The speaker cords may not be connected securely. Check to see if they are connected securely and cannot be disconnected by pulling on them slightly. • The speaker cords may have the short-circuit problem. When a test tone is output from a different speaker than the speaker displayed on the screen The speaker pattern to the connected speaker is not set up correctly. Make sure the speaker connection and the speaker pattern match. Test Tone menu parameters x Test Tone •OFF •AUTO The test tone is output from each speaker in sequence. • L, C, R, SR, SBR, SBL, SL, SW You can select which speakers will output the test tone. x Phase Noise •OFF • L/R, L/C, C/R, R/SL, R/SR, SR/SL, SR/ SBR, SBR/SBL, SR/SB, SBL/SL, SB/SL, SL/L, L/SR Lets you output the test tone sequentially from adjacent speakers. Some items may not be displayed, depending on the setting of the speaker pattern. x Phase Audio •OFF • L/R, L/C, C/R, R/SL, R/SR, SR/SL, SR/ SBR, SBR/SBL, SR/SB, SBL/SL, SB/SL, SL/L, L/SR Lets you output front 2 channel source sound (instead of the test tone) sequentially from adjacent speakers. Some items may not be displayed, depending on the setting of the speaker pattern. Other menu parameters of Speaker settings x Center Mix (On/off of the analog downmix settings) •OFF If there is center speaker connected, this setting is set to “OFF” automatically. •ON We recommend you set “Center Mix” to “ON” to enjoy digital audio with high 78GB quality sound when you do not have a center speaker connected. Analog downmix works when you set “Center Mix” to “ON.” This setting is also effective to input signals from MULTI CHANNEL INPUT jacks. x Sur Back Assign (Settings of the surround back speaker(s)) •OFF If you have not connected surround back speakers, select “OFF.” •BI-AMP If you connect front speakers in a biamplifier configuration, select “BI-AMP.” •ZONE 2 If you are using the surround back speakers in zone 2, select “ZONE 2.” When you select “ZONE 2,” the input to the SUR BACK jacks of the MULTI CHANNEL INPUT is invalid. Note Set “Sur Back Assign” to “OFF,” then connect the surround back speakers to this receiver when you want to change the connection from a bi-amplifier connection or a zone 2 connection to a surround back speakers connection. Re-set up the speakers after you connect the surround back speakers. Refer to “Auto Calibration” (page 46) or “Manual Setup” (page 74). x Crossover Freq (Speaker crossover frequency) Lets you set the bass crossover frequency of speakers that has been set to “SMALL” in the Speaker menu. Measured speaker crossover frequency is set for each speaker after the auto calibration. The adjusted value is set for each speaker when you adjust the speaker crossover frequency using “Crossover Freq” after the auto calibration. x Multi Ch SW Level (Multi-...


Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias