Fabricante : Samsung
Arquivo Tamanho: 6.48 mb
Arquivo Nome :
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Press the POWER button to turn on the DVD (BD) player. 2. Press the BD/DVD button on the remote control to set the remote to DVD (BD) mode. 3. Point the remote control toward the DVD (BD). 4. While holding down POWER button, enter the code corresponding to your brand of DVD (BD). • If there is more than one code listed for your DVD (BD) in the table, enter one at a time to determine which code works. • If the code matches the DVD (BD)'s code, the DVD (BD) will be turned off. 5. If DVD (BD) is turned on or off when you press the POWER button of the remote controller, the setting is completed. • You can use DVD (BD) POWER, PLAY, PAUSE, STOP, SKIP, MENU and Numeric buttons (0~9). .NOTE . The remote control may not work on some brands of DVD. Also, some operations may not be possible depending on your brand of DVD. . The remote control will work with Samsung DVD (BD) by default. DVD Brand Code List Brand Code Number Brand Code Number ONKYO 004, 014 TOSHIBA 004, 018 OPTIMUS 011 YAMAHA 009, 033 PANASONIC 021 ZENITH 004, 024 PROSCAN 006 TAEGWANG 026 PHILIPS 004, 023 PS2 028 PIONEER 007, 011, 022, 025 X-BOX 029 RCA 006 APEX 030 SAMSUNG 000, 027 Marantz 031 SANYO 002 SONY 015, 020 005, 016 THETA DIGITAL 011 Brand Code Number DENON 003, 032 DOONOON 019 DMTECH 017 FISHER 002 GE 006 HARMAN/KARDON 012 JVC 010, 013 KENWOOD 008 LG 001 MAGNAVOX 004 MITSUBISHI BD Player Brand Code List Brand Code Number SAMSUNG 000, 001, 002, 003, 004 .NOTE . The remote control will control Samsung BD players only. 60 English HW-D700_D770S_ELS_0609.indd 60 2011-06-09 5:38:48 Other Information Troubleshooting 06 Other Information Before requesting service, please check the following. Symptom The unit will not turn on. Check • Is the power cord plugged into the outlet? Remedy • Connect the power plug to the outlet. A function does not work when the button is pressed. • Is there static electricity in the air? • Disconnect the power plug and connect it again. Sound is not produced. • Are the speakers and external components connected properly? • Is the Mute function on? • Is the volume set to minimum? • Is the Speaker Size set incorrectly to NONE? • Connect them correctly. • Press the MUTE button to cancel the function. • Adjust the volume. • Refer to pages 36 to select LARGE, SMALL or YES. Picture does not appear on a TV when the function is selected. • Is the external component connected properly? • Connect it correctly. Remote controller does not work. • Are the batteries drained? • Is the distance between remote control and main unit too great? • Replace with new batteries. • Operate at close distance. The sound from the left/ right channels is reversed. • Are the left/right speaker or left/right input/output cables connected properly? • Check the left/right channel and connect it/them correctly. Can't receive radio • Is FM antenna connected • Connect the antenna correctly. broadcasts. properly? • If the input strength of antenna signal is weak, install the FM antenna in a place with good reception. There is no sound from • Are the surround speakers • Refer to page 16 to connect surround speakers. connected properly? • Is SURR (surround) incorrectly set to NONE in the Speaker Size? • Is surround mode set to stereo? them properly. • Refer to page 36 to select LARGE or SMALL. • Refer to pages 49 ~ 51 to select proper Surround Mode. There is no sound from surround back speakers • Are the surround back speakers connected properly? • Is SBACK (Surround Back) set to NONE in the Speaker Size? • Is Surround Mode set to EX/ES? • Refer to page 16 to connect them properly. • Refer to page 36 to select LARGE or SMALL. • Refer to page 42 to set Surround Mode to EX/ES. English 61 HW-D700_D770S_ELS_0609.indd 61 2011-06-09 5:38:48 Other Information Symptom Can't select EX/ES mode. Check • Is SBACK (Surround Back) set to NONE in the Speaker Size? • Is the input signal selected properly? Remedy • Refer to page 36 to select LARGE or SMALL. • Use a 7.1 channel external component. Can't select Dolby Pro Logic llx mode. • Is the input signal selected properly? • Only 2 channel signal can select Dolby Pro Logic IIx mode. (ex:Dolby Digital, PCM, 2 channel analogue input signal.) Can't select NEO:6 mode. • Is the input signal selected properly? • Use PCM and Analogue input signal. There is no sound when playing a DTS encoded DVD. • Is Digital input selected? • Check whether the DVD player is properly connected and refer to page 31 to select the digital input. Product Protection Function " Heat protection • The protection function will come on if the main unit or power transformer overheats. " will appear in the display . This function will come on : -If speaker terminal is shorted -If speaker cable is shorted If there is no problem when you turn the unit on again after turning it off, PROTECTION mark will disappear on the display and the unit will work properly. 62 English HW-D700_D770S_ELS_0609.indd 62 2011-06-09 5:38:48 Auto Calibration Error List Auto Calibra...
Este manual também é adequado para os modelos :receptor e amplificador - HW-D770S (6.48 mb)