Assessments - 1, GPA: 5
(
)
)
|
Fotos e especificações Yamaha RX-397 |
por este dispositivo também tem outras instruções :
Facilidade de uso
M Middle-of-the-road music (easy-listening) LIGHT M Light classics CLASSICS Serious classics OTHER M Other music ■ RT (Radio Text) mode Information about the program (such as the title of the song or name of the singer) on the Radio Data System station being received is displayed using a maximum of 64 alphanumeric characters, including the umlaut symbol. If other characters are used for RT data, they are displayed with an underbar (_). ■ CT (Clock Time) mode The current time is displayed and updated every minute. If the data are accidentally cut off, “CT WAIT” may appear. ■ EON (Enhanced Other Networks) See “EON function” on page 27. Changing the Radio Data System mode Four modes are available for displaying Radio Data System data. The PS, PTY, RT and/or CT indicators that correspond to the Radio Data System data services offered by the station light up in the front panel display. y When performing this operation, first slide the AMP/DEVICE switch to the AMP position. 1 Press TUNER on the remote control to set this unit to tuner mode. TUNER Press FREQ/TEXT repeatedly on the remote control to display the various Radio Data System data offered by the transmitting station. [bh FREQ/TEXT'-'V/ Remote control L. L L i Frequency display 2 25 RADIO DATA SYSTEM (EUROPE MODEL ONLY) Notes PTY SEEK function • Do not press FREQ/TEXT until a Radio Data System indicator lights up in the front panel display. You cannot change the mode if you press the button prior to this. This is because this unit has not finished receiving all of the Radio Data System data from the station. • Radio Data System data not offered by the station cannot be selected. • This unit cannot utilize the Radio Data System data source if the signal received is not strong enough. In particular, the RT mode requires a large amount of data, so it is possible that the RT mode may not be displayed even if other Radio Data System modes (PS, PTY, etc.) are displayed. • Radio Data System data may not be received under poor reception conditions. In such cases, press TUNING MODE (AUTO/MAN’L MONO) so that the AUTO indicator disappears from the front panel display. Although this will change the reception mode to manual, Radio Data System data may be displayed when you change the display to Radio Data System mode. • If the signal strength is weakened by external interference during the reception of a Radio Data System station, the Radio Data System data service may be cut off suddenly and “...WAIT” will appear in the front panel display. If you select the desired program type, this unit automatically searches all preset Radio Data System stations that are broadcasting a program of the required type. y When performing this operation, first slide the AMP/DEVICE switch to the AMP position. 1 Press PTY SEEK MODE on the remote control to set this unit in the PTY SEEK mode. The program type of the station being received or “NEWS” flashes in the front panel display. To exit from the PTY SEEK mode, press PTY SEEK MODE again. \ I / I 'I I... l-'-l / I \ Remote control Flashes 26 RADIO DATA SYSTEM (EUROPE MODEL ONLY) EON function 2 Press PRESET u / d on the remote control to select the desired program type. The selected program type appears in the front panel display. This function uses the EON data service on the Radio Data System station network. If you select the desired program type (NEWS, INFO, AFFAIRS or SPORT), this unit automatically searches for all preset Radio Data System stations that are scheduled to broadcast the selected type of program and switches from the station currently being received to the new station when the broadcast starts. Press PTY SEEK START on the remote control to begin searching all preset Radio Data System stations. The selected program type flashes and the PTY HOLD indicator lights up in the front panel display while searching for stations. To cancel searching, press PTY SEEK START again. PTY HOLD Lights up Remote control The unit stops searching when it finds a station broadcasting the selected type of program. If the found station is not the one you desire, press PTY SEEK START again. This unit resumes searching for another station broadcasting the same type of program. tw s f e 1^1 r^l f^l GË When performing this operation, first slide the AMP/DEVICE switch to the AMP position. Note This function can only be used when a Radio Data System station that offers the EON data service is being received. When such a station is being received, the EON indicator lights up in the front panel display. 1 Check that the EON indicator is lit in the front panel display. If the EON indicator is not lit up, tune into another Radio Data System station so that the EON indicator lights up. 2 3 PTY SEEK 2 Press EON repeatedly on the remote control to select the desired program type (NEWS, INFO, AFFAIRS or SPORT). The selected program type name appears in the front panel display. REC Remo...