Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
Approximate operating range . *1: No remote control key is marked MD, but the TAPE1 key can be used to control a MD player by switching the display of the main unit from TAPE1 to MD. $ Remote sensor Model: RC-R0505 Infrared ray system . Pressing the POWER key of the remote control unit while the STANDBY indicator is lit turns the power ON. Press the desired key after the power has been turned ON. . When two operation keys of the remote control unit are pressed successively, press each key securely reserving an interval of more than 1 second for each press. (When used with a MD) Remote control key correspondence table (For KENWOOD component control mode) TAPE1 TAPE1 SRS 3D POWER PHONES ON/STANDBY INPUT SELECTOR VOLUME CONTROL DOWN UP STANDBY 1 2 3 4 5 6 7 8 9 0 +10 SPEAKERS AUTO DIRECT MEMORY AUDIO-VIDEO SURROUND RECEIVER KR-V797 PRO LOGIC STEREO SRS 3D N.B. SOURCE DIRECT P.CALL 3 STEREO TUNING BAND DISPLAY TAPE2 MONITOR .. SPEAKER 30° 6m 30° 1 2 3 POWER 4 5 6 7 8 9 DISK SKIP 0 +10 SOUND CENTER MODE A/B +100 VIDEO1 TAPE1 TUNER CD PHONO IDEO2 MUTE 1 . 7 6 AV AUX SETUP REMOTE CONTROL UNIT RC-R0505 4 . 2 AUTO BAND P.CALL MONITOR TAPE2 VOLUME CONTROL LEVEL CONTROL LISTENI MODE 2 3 Playing music KR-897/KR-797 (En) : Keys or controls to be used in this operation POWER PHONES ON/STANDBY INPUT SELECTOR VOLUME CONTROL UPDOWN 1 2 3 4 5 6 7 8 9 0 +10 AUTO DIRECT MEMORY AUDIO-VIDEO SURROUND RECEIVER KR-897 PRO LOGIC STEREO SRS 3D N.B. SOURCE DIRECT P.CALL 3 STEREO TUNINGBAND DIMMER TAPE2 MONITOR POWER1 2 3 4 5 6 7 8 9 DISK SKIP 0 +10 SOUND CENTER MODE A/B +100 TUNER CD PHONO VIDEO2 MUTE 1 . 7 6 AV AUX REMOTE CONTROL UNIT RC-R0505 4 . 2 AUTO BAND P.CALL VOLUME CONTROL STANDBY SPEAKERS SRS 3D SPEAKERS VIDEO1 TAPE1 SETUP TAPE2 MONITOR LEVEL CONTROL LISTEN MODE 3TAPE1 (MD or VIDEO1)*1 4CD 5VIDEO2 *1: Switching the TAPE1 display to MD or VIDEO1 display When a KENWOOD MD recorder is connected in the [SL 16] system control mode, the TAPE 1 input should be switched to the MD input using the following procedure. 1Select TAPE1 with the INPUT SELECTOR. 2Press and hold the AUTO key for more than 2 seconds to select MD. 3VIDEO12MD1TAPE1 INPUT SELECTOR CD NoteNote 1 1 Turn the power ON. POWER ON/STANDBY 2 2 Select the SPEAKERS key setting. SPEAKERS Select the input source.3The SPEAKERS indicator should light up. STANDBY SRS 3D SPEAKERS 5 5 4 4 Play the selected source. Adjust the volume. VOLUME CONTROL DOWN UP To decrease volume To increase volume When the SPEAKERS indicator is ON: The speakers connected to the SPEAKERS terminals on the rear panel output sound. When the SPEAKERS indicator is OFF: The speakers do not output sound. Use this setting when listening through headphones. .For the operation when the power amplifier (KM-897) is connected to the KR-897, see 7 and refer to the instruction manual of the KM-897. The input sources are switched in the following order: 1 TUNER (frequency display) The selected source is 2 PHONO displayed. Volume level is displayed. VOL-68dB .The time taken till the volume level is displayed is variable depending on the current operating condition. .Rotating the VOLUME CONTROL at a higher speed increases the amount of volume change (AI VOLUME function). .The sound of input source cannot be listened to while TAPE 2 MONITOR is ON. Sound adjustment functions KR-897/KR-797 (En) POWER1 2 3 4 5 6 7 8 9 DISK SKIP 0 +10 SOUND CENTER MODE A/B +100 TUNER CD PHONO VIDEO2 MUTE 1 . 7 6 AV AUX REMOTE CONTROL UNIT RC-R0505 2 4 . AUTO BAND P.CALL VOLUME CONTROL VIDEO1 TAPE1 SETUP TAPE2 MONITOR LEVEL CONTROL LISTEN MODE POWER PHONES UPDOWN 1 2 3 4 5 6 7 8 9 0 AUTO DIRECT MEMORY PRO LOGIC STEREO SRS 3D N.B. SOURCE DIRECT P.CALL 3 STEREO TUNING TAPE2 MONITOR STANDBY SPEAKERS SRS 3D SPEAKERS INPUT SELECTOR VOLUME CONTROL +10 AUDIO-VIDEO SURROUND RECEIVER KR-897 BAND DIMMER Adjusting the tone 1Ensure that the SRS 3D and S.DIRECT indicators are not lit. SOUND LEVEL CONTROL 2Select the tone mode to be adjusted (from BASS, MIDDLE and TREBLE). 3Adjust the tone To increase level To decrease level The level can be adjusted between -8 and +8 with an increment or decrement of 2 per press. : Keys or controls to be used in this operation S.DIRECTSRS 3D Make sure that the light is out. .If the S.DIRECT indicator is lit, press the S.DIRECT key to turn it off. If the SRS 3D indicator is lit, press the SRS 3D key to turn it off. Each press of the key switches the modes as follows: (When the SRS 3D Stereo is OFF) 1 BASS : Mode for adjusting the low frequencies. 2 MIDDLE : Mode for adjusting the middle frequencies. 3 TREBLE : Mode for adjusting the high frequencies. 4 End of setting .Adjustment of SRS (Sound Retrieval System) 3D Stereo. ¶ BASS + 2 Display when “BASS” is selected. The displayed value changes. BASS -2 Adjusting the left/right sound balance SURROUND 3 STEREO S.DIRECT Make sure that the light is out. .If the SURROUND, 3STEREO or S.DIRECT indicators are lit, press the STEREO key to turn them OFF. Position of the left speaker ...
Este manual também é adequado para os modelos :receptor e amplificador - KR-797 (1.31 mb)