Assessments - 2, GPA: 4.5
(
)
)
|
Facilidade de uso
“Presetting RDS stations (RDS AUTO MEMORY)”. * MEMORY MULTI CONTROL 1 Tune to the station you want to store. 2 Press the MEMORY key while receiving the station. Proceed to step 3 within 5 seconds. (If more than 5 seconds elapse, press the MEMORY key again). • When storing radio stations manually, it may take a few seconds before the "MEMORY" indicator appears in the display after pressing the MEMORY key depending on receiving conditions. Blinks for 5 seconds Lights for 5 seconds 01 8 ))9. FM MHz STEREO ASP TUNED MEMO. AUTO ST. SW RL 3 Use the MULTI CONTROL to select one of the station presets (1 – 30). 4 Press the MEMORY key to accept the setting. • Repeat steps 1, 2, 3 and 4 to store as many stations as necessary. • If you store a station at a previously used preset, the old station will be replaced by the new one. Receiving preset stations AUDIO 1-0, +10 TUNER 1-0, +10 RC-R0507 RC-R0307 KRF-V7010/V6010/V5010 (En/T) 2 Enter the number of the preset you want to receive (up to"30"). Press the numeric keys in the following order: For "15", press .......... 0,5 For "20", press .......... 0,0,) • If you make a mistake entering a two digit number, press the +10 key several times to return to the original display and start again. 15 8 ))9. FM MHz STEREO ASP TUNED AUTO ST. SW RL Receiving preset stations in order (P.CALL) AUDIO P.CALL TUNER P.CALL RC-R0507 RC-R0307 Operations 1 Use the remote control to select the tuner as the source. • The remote control switches to the tuner operating mode. 2 Use the P.CALL key to select the desired station. • Each time you press the key, another preset station is received in order. Pressing the P.CALL (%) key (.) does the following: 01=02=03=...... 28=29=30=01=02=03= Pressing the P.CALL (.) key (4) does the following: 01+02+03+...... 28+29+30+01+02+03+ Holding down the key, lets you skip through the presets, receiving each for 0.5 seconds apiece. 1 Use the remote control to select the tuner as the source. • The remote control switches to the tuner operating mode. Listening to radio broadcasts KRF-V7010/V6010/V5010 (En/T) Tuning by program type (PTY search) This function lets you set the tuner to automatically search for stations “NO PROG” is displayed if this operation is attempted before which are currently broadcasting the type of program (genre) you want performing the RDS Auto Memory operation. to listen to. Under certain receiving conditions, it may take more than 1 minute to complete the search. 3 Press the PTY key to start searching. Operations PTY MULTI CONTROL PTY MULTI CONTROL RC-R0307 Preparations • Execute the RDS auto memory procedure. • Set the broadcast band to FM. • Tune to an RDS station. 1 Press the PTY key to activate the PTY search mode. NEWs STEREO ASP MUTE SW RL RDS EON PTY TA NEWS When an RDS broadcast is received, the program type is shown on the display. If no PTY data is available, or if the station is not an RDS station, “NONE” is displayed. 2 While the “PTY” indicator is lit, use the MULTI CONTROL to select the program type of your choice. Program type table Program Type Name Display Program Type Name Display Pop Music POP M Weather WEATHER Rock Music ROCK M Finance FINANCE *M.O.R. Music M.O.R. M Children’s programmes CHILDREN Light Classic Music LIGHT M Social affairs SOCIAL A Serious Classic Music CLASSICS Religion RELIGION Other Music OTHER M Phone in PHONE IN News NEWS Travel TRAVEL Current Affairs AFFAIRS Leisure LEISURE Information INFO Jazz music JAZZ Sport SPORT Country Music COUNTRY Education EDUCATE National Music NATION M Drama DRAMA Oldies Music OLDIES Cultures CULTURE Folk Music FOLK M Science SCIENCE Documentary DOCUMENT Varied Speech VARIED *M.O.R. Music (Middle of the Road Music) EXAMPLE: Searching for a Rock Music broadcast. Display while searching Blinks ROCK M FM STEREO ASP MUTE SW RL RDS PTY Program type name display Display when a station is received. Goes out BBC 1 FM FM STEREO ASP MUTE SW RL RDS Station name display • No sound is heard while “PTY” is blinking. • If the desired program type cannot be found, “NO PROG” is displayed, then after several seconds the display returns to the original display. To select another program type Repeat steps 1, 2 and 3. Reserving the desired information When the receiver is tuned to a RDS EON station (a station at which the EON indicator lights up), this function lets you set the receiver to automatically switch stations to receive news or traffic programs as they are broadcast. When the broadcast is over, the receiver returns to the original station automatically. TA/NEWS VOLUME CONTROL TA/NEWS VOLUME RC-R0307 Preparation • Set the broadcast band to FM. Listening to radio broadcasts 1Complete steps 1~3 of "Presetting RDS stations (RDSAUTO MEMORY)". * Skip this step if you have already completed the RDS AUTO MEMORY procedure. • The EON function will not work if all 30 FM preset stations were stored manually using the procedure shown in “Presetting radio stations manually”. Be sure to use the ...
Este manual também é adequado para os modelos :receptor e amplificador - KRF-V5010 (553.27 kb)
receptor e amplificador - KRF-V6010 (553.27 kb)