Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
Although a HDCD- compatible CD player is usually required to exhibit the full characteristics of the HDCD, this receiver is capable of reproducing high-quality HDCD signals by connecting a CD player through digital connection, even if it does not incorporate the HDCD circuitry. D.R.I.V.E. is a KENWOOD original technology for reproducing signals with high resolution by instant switching of the internal filters according to the input signal. This receiver incorporate a high performance DSP to provide very high resolution from 32-bit DRIVE III circuitry, achieving stereo audio reproduction with the best quality ever reached. The D.R.I.V.E. indicator lights when the D.R.I.V.E. circuit is activated. The HDCD indicator lights when the HDCD circuit is activated and a HDCD is played. HDCD and D.R.I.V.E. are designed to be activated automatically to select the optimum circuit path. HDCD and D.R.I.V.E. is effective only at the time of digital input stereo, DSP mode or multi channel music. Some HDCD-recorded discs do not contain all tracks as HDCD recordings. (The HDCD indicator will not light for tracks not recorded as HDCD.) HDCD and D.R.I.V.E. is effective only at the time of THX Off mode. , HDCD®, High Definition Compatible Digital® and Pacific MicrosonicsTM are either registered trademarks or trademarks of Pacific Microsonics, Inc. in the United States and/or other countries. HDCD system manufactured under license from Pacific Microsonics, Inc. This product is covered by one or more of the following: IN the USA: 5,479,168, 5,638,074, 5,640,161, 5,808,574, 5,838,274, 5,854,600, 5,864,311, 5,872,531, and in Australia: 669114. Other patents pending. Using Receiver 33 How Do I Adjust the Surround Modes? Headphone Operation Insert the headphone plug into the receiver’s PHONES jack and adjust the listening level. Using Receiver STANDBY ON/STANDBY VOLUME CONTROL When listening through headphones, set SPEAKERS A and B to OFF. 34 How Do I Adjust the Surround Modes? Selecting the Inputs To select an input on the receiver: Press one of the INPUT SELECTOR (¤/‹) buttons. Each press changes the input in the following order. 1 Tuner (frequency display) 2 CD1 3 MD/TAPE1 4 CD-R 5 VIDEO1 6 VIDEO2 7 VIDEO3 8 VIDEO4 9 DVD 0 AV AUX -PHONO (VR-5080 only) ¤ INPUT SELECTOR ‹ To return to the previously displayed input, press the other button. Using Receiver Although VIDEO4 is displayed in the initial status, the receiver cannot be switched to select VIDEO4. The VIDEO4 display will not appear after Remote Control unit has been set up. To select an input on Remote Control unit: The TV-monitored device, video device and audio device can be selected using separate buttons. Audio device MUSIC 1 CD1 2 MD/TAPE1 3 Tuner 4 CD-R 5 PHONO If any of the above inputs is not identified, the next device name will be displayed. Video device MOVIE 1 VIDEO1 2 VIDEO2 3 VIDEO3 ( 4 VIDEO4) 5 DVD 6 AV AUX If any of the above inputs is not identified, the next device name will be displayed. TV button TV 1 TV1 2 TV2 3 CABLE The TV button cannot select the input. It can be used to remote control TV1, TV2 or CABLE if , devices are identified at these inputs. 35 Using Receiver Using Receiver How Do I Operate Devices? How Do I Operate Devices? Your Remote Control unit makes it easy for you to control the different devices connected to your receiver. Once AV devices are connected and identified by Remote Control unit , it can use the same remote control functions as the remotes originally provided with the AV devices. (See “Chapter Two: Setting Up Remote Control Unit” of the Connection and Setup Guide.) For the operations of each device, please also refer to the manuals provided with them. Playback of the device connected to the CD2/TAPE2 MONITOR These instructions are for operating a second CD player or tape deck from a single-Zone installation or from Zone A. For more information on operating devices in a multi-Zone setup, see “Chapter Two: Using Remote Control Unit in Multiple Zones” on page 54 of this manual. 1. Press the CD2/TAPE2 MONITOR button on the receiver’s front panel. The CD2/TAPE2 MONITOR indicator lights up. 2. Play the CD player or cassette deck in the same way as usual. As this cannot be controlled from Remote Control unit, use the CD player or cassette deck controls. After completion of playback, press the CD2/TAPE2 MONITOR button again so that the CD2/TAPE2 MONITOR indicator goes out. For detailed operating procedures of your AV device, refer to its instruction manual. Do not connect the system control cable from the second CD player or second cassette deck, even if it supports system control. 36 How Do I Operate Devices? Operating a Television To operate a standard TV: 1. Press the TV button. 2. Use Remote Control unit to perform same remote control operations as with the remote of the TV set. For the buttons which are usually available, see “Chapter Three: Button Layout in Controlling Other Devices” on page 57. For detailed operating procedures ...
Este manual também é adequado para os modelos :receptor e amplificador - VR-5080 (918.25 kb)
receptor e amplificador - VR-5700 (918.25 kb)