Assessments - 1, GPA: 4
(
)
)
|
Facilidade de uso
Each press switches the tuning method as follows: 1 AUTO lit (auto tuning) 2 AUTO not lit (manual tuning) “AUTO” indicator lights up in the display. • Normally, set to “AUTO” (auto tuning). If the radio waves are weak and there is a lot of interference, switch to manual tuning. (With manual tuning, stereo broadcasts will be received in monaural.) 4Use the MULTI CONTROL knob or Multi %/ fi keys, or Tune – 1/ + .keys to select the station. “ST.” lights when Frequency a broadcast is being display received in stereo. “TUNED” is displayed when a station is received. Auto tuning : The next station is tuned automatically. Manual tuning : Turn the knob (press the key) to select the desired station. 21 EN Listening to radio broadcasts Listening to radio broadcasts MEMORY MULTI CONTROL 1Tune to the station you want to store. 2Press the MEMORY key while receiving the station. Blinks for 5 seconds Lights for 5 seconds Proceed to step 3 within 5 seconds. (If more than 5 seconds elapse, press the MEMORY key again). 3Use the MULTI CONTROL knob or Multi %/ fi keys to select one of the station presets (1 –40). 4Press the MEMORY key again to confirm the setting. • Repeat steps 1, 2, 3, and 4 to store as many stations as necessary. • If you store a station at a previously used preset, the previous station will be replaced by the new one. Receiving preset stations TUNER 4.+ + + Numeric keys 1Press the TUNER key to select tuner as the source. 2Enter the number of the preset station you want to receive (up to “40”). Press the numeric keys in the following order: For “15”, press ................................ 0,5 For “20”, press ................................ 0,0,) • If you make a mistake entering a two digit number, press the +10 key repeatedly to return to the original display and start again. Receiving preset stations in order (P.Call) TUNER 4.+ + + P.Call @/ # 1Press the TUNER key to select tuner as the source. 2Use the P.Call @.#keys to select the desired station. • Each time you press the key, another preset station is received in order. Pressing the P.Call # does the following: Pressing the P.Call @ does the following: Holding down the P.Call # or @ key, lets you skip through the presets, receiving each preset station at 0.5 second intervals. 22 EN Ambience effects This receiver is equipped with listening modes that allow you to enjoy an enhanced sonic ambience with a variety of video sources. In order to obtain the optimum effect from the surround modes, make sure to input the proper speaker settings beforehand. ^ Surround modes The below speaker placements are for 5.1 channel surround sound The below speaker placements are for 6.1 channel surround sound system which are;system which is; • Dolby Digital •Dolby Digital EX • Dolby Pro Logic II • Dolby Digital, Dolby Pro Logic II and DSP if “SURR MIX ON”. • DTS & • DSP • DVD 6-channel SRSL CL RSW TV / SCREEN SB SRSL CL RSW TV / SCREEN No Surround Back speaker With Surround Back speaker L SW C R Front left speaker Subwoofer Center speaker Front right speaker SL SR SB Surround left speaker Surround right speaker Surround back speaker Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. “DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc. Note LFE = Low Frequency Effects. This channel delivers separate non- directional bass signals to the subwoofer for more dynamic deep bass sound effects. 23 EN Ambience effects Ambience effects Dolby Digital The Dolby Digital surround format lets you enjoy up to 5.1 channels of digital surround sound from Dolby Digital program sources (such as Laserdisc or DVD software marked ). Compared with previous Dolby surround, Dolby Digital provides even better sound quality, greater spatial accuracy, and improved dynamic range. Although a full set of speakers (front left, right, and center, surround left and right, and a subwoofer) is required for true 5.1 channel Dolby Digital surround sound, this receiver lets you enjoy Dolby Digital (and Dolby Surround) program sources, even if you connect only the front speakers. Dolby Digital EX Dolby Digital EX is an extension of Dolby Digital technology, Dolby Digital EX creates six full-bandwidth output channels from 6.1channel sources. This is done using a matrix decoder that derives three surround channels from the two in the original recording. This is achieved by using three different surround signals, surround left, surround right, and surround back, each driving its own array of speakers. Think of it as adding a center channel for the rear speakers, which give more diffuse and natural surround effect, even if you wanted the ability to completely encircle the audience with sound, positioning sound effects exactly where they would be heard in real life. For best results, Dolby Digital EX should be used with movie soundtracks recorded with Dolby Digital Surround EX which contain a digi...
Este manual também é adequado para os modelos :receptor e amplificador - KRF-V6070D (1.25 mb)