Log:
Assessments - 3, GPA: 4 ( )

Instruções de Operação Sony, Modelo STR-DE1015G

Fabricante : Sony
Arquivo Tamanho: 1.01 mb
Arquivo Nome :
Língua de Ensino: en
Ir para baixar



por este dispositivo também tem outras instruções :

Facilidade de uso


• During this adjustment, the test tone is emitted from both speakers simultaneously. 5 Click TEST again to turn off the test tone. To return to the main menu Click EXIT. To return to a previous menu Click RETURN. You can adjust all speakers at one time Use MASTER VOL on the remote. To adjust the subwoofer level (WOOFER) Click WOOFER + or – to adjust the level of the sub woofer from –20.0 dB to +10.0 dB (0.5 dB/steps). This adjustment is not possible during the test tone operation. Note The test tone cannot be used in the following cases: – When the DIRECT PASS is ON – When the “MUTING” is displayed – When the SOUND FIELD is OFF – When a sound field genre other than “DOLBY” is selected. SURROUND EDIT CENTER : REAR : + – LEVELdB dB + – RETURN STANDARD EXIT OTHER TEST BALANCE TEST TONE +10 +10 [ ]– – – – – – + – – – – – – bB REAR Dolby Surround Setup PRO LOGIC SPORTS GAMEMOVIE MUSIC EXIT MODE O N O N O N SOUND FIELD BASS BOOST DIRECT PASS OFF OFF OFF SURTONE PRO LOGIC FUNCTION SOUND SETUP Dolby Pro Logic (STR-DE815G and STR-D760Z) Dolby Pro Logic Surround is a decoding system standardized in TV programs and movies. Dolby Pro Logic Surround improves sound image by using four separate channels. These channels manipulate the sound and enhance the action as it happens on the screen. Specifying the center mode To take advantage of Dolby Pro Logic Surround, you should connect at least one pair of rear speakers and/ or one center speaker, plus a TV and a VCR. Also, to enjoy a full effect, you need to select the appropriate center mode (WIDE, NORMAL, PHANTOM, or 3 CH LOGIC modes) on the receiver, according to your speaker system. WIDE mode Select this mode if you have front and rear speakers and a large center speaker. With this mode, you can take full advantage of Dolby Surround sound. Center speaker Rear speaker (L) Rear speaker (R) Front speaker (L) Front speaker (R) NORMAL mode Select this mode if you have front and rear speakers and a small center speaker. Since a small speaker cannot produce enough bass, the bass sound of the center channel is output from the front speakers. Center speaker Front speaker (L) Front speaker (R) Rear speaker (R)Rear speaker (L) PHANTOM mode Select this mode if you have front and rear speakers but no center speaker. The sound of the center channel is output from the front speakers. Front speaker (R)Front speaker (L) Rear speaker (L) Rear speaker (R) 3 CH LOGIC mode Select this mode if you have front and center speakers but no rear speakers. The sound of the rear channel is output from the front speakers to let you experience some of the surround sound without using rear speakers. Front speaker (L) Front speaker (R) Adjusting the speaker volume To enjoy Dolby Pro Logic Surround sound, select the appropriate center mode. Then adjust the volume of each speaker using the test tone that the receiver provides. The test tone feature lets you set the volume of your speakers to the same level. (If all of your speakers have equal performance, you do not have to adjust the speaker volume.) Using the remote lets you adjust the volume level from your listening position. 1 Click SOUND in the main menu. 2 Click PRO LOGIC, then click SUR. Dolby Surround Setup Dolby Surround Setup 3 Click C MODE repeatedly to display the center mode appropriate for your speaker system (see page 24). SURROUND EDIT DELAY CENTER : REAR : + – LEVEL C MODE dB dB + – RETURN STANDARD EXIT TESTWOOFER 0 0 NORMAL 4 Click TEST. You will hear a test tone from the speakers in the following order. The speaker emitting the test tone is shown in red on the SURROUND EDIT menu. WIDE, NORMAL: Front (left) nCenter n Front (right) nRear PHANTOM: Front (left and right) nRear 3CH LOGIC: Front (left) nCenter nFront (right) SURROUND EDIT DELAY CENTER : REAR : + – LEVEL C MODE dB dB + – RETURN STANDARD EXIT TESTWOOFER 0 0 NORMAL 5 Adjust the volume levels so that you hear the test tone from each speaker at the same volume level when you are in your listening position: • Click CENTER + or – to adjust the level of the center speaker from –15.0 dB to +10.0 dB (1 dB/steps). During this adjustment, the test tone is emitted from the center speaker. • Click REAR + or – to adjust the level of the rear speakers from –15.0 dB to +10.0 dB (1 dB/ steps). During this adjustment, the test tone is emitted from both speakers simultaneously. 6 Click TEST when you are done adjusting. The test tone is turned off. To return to the main menu Click EXIT. To return to a previous menu Click RETURN. You can adjust all speakers at one time Use MASTER VOL on the remote. You can increase the output level of the rear speakers You can raise the output of the rear speakers by 5 dB. When turning on the receiver, press POWER and MODE simultaneously to display “GAIN UP”. To return the output level to normal, repeat this procedure to display “GAIN NORMAL”. Playback/Recording Selecting a Component You can listen to or watch a connected component by clicking on the component in...

Este manual também é adequado para os modelos :
receptor e amplificador - STR-D760Z (1.01 mb)
receptor e amplificador - STR-DE815G (1.01 mb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias