Log:
Assessments - 2, GPA: 4 ( )

Instruções de Operação Kenwood, Modelo KGC-4032

Fabricante : Kenwood
Arquivo Tamanho: 295.58 kb
Arquivo Nome : kgc4032.pdf
Língua de Ensino: en
Ir para baixar



Facilidade de uso


Familiarity with installation and operation procedures will help you obtain the best performance from your new graphic equalizer. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your KENWOOD dealer for information or service on this product. Model KGC-4032 Serial number_ «©PRINTED IN-JAPAN B50-7982-00(K)(D 90/12 1110 98765432 A WARNING TO PREVENT ELECTRIC SHOCK, FIRE AND OTHER INJURY. PLEASE NOTE THE FOLLOWINGS: • The unit is designed to be connected 12 V DC and negative grounding. • Do not open enclosure, such as front panel, top or bottom cover. • Do not place the unît, where it will be ex- ' posed to direct sunlight or close to heating device. • Do not drop pieces of metal, needles, • Do not place the unit in areas of exces-coins and other electrically conductive sive dust, high humidity or on unstable materials into the unit. surfaces. _ CLEANING 1. Turn the power off, before cleaning the unit, 2. Do not use any type of abrasive pad, thinner, benzine and any such kind of objects. 3. Wipe the front panel and other exterior surfaces of the unit with a soft dry cloth or a soft cloth lightly moistened with a neutral detergent. • If an abnormal smell or smoke is detected, immediately turn the power off. ■ If you have difficulty in installing the set in your car, please contact your KENWOOD dealer. CONTENTS Page • EQUALIZER CURVE ADJUSTMENT............................................ • LEVEL METER........................................................................ • FADER ADJUSTMENT............................................................. • ACCESSORY AND INSTALL MANNER........................................ • INSTALLATION ....................................................................... • CONNECTION........................................................................1 • TROUBLESHOOTING GUIDE.....................................................11 • SPECIFICATIONS....................................................................12 4 IEn> in CD N 00 O) O EQUALIZER CURVE ADJUSTMENT Press the Graphic equalizer switch to NOTE: Graphic equalizer switch to ON. OFF, a flat frequency response is obtained. ■T=r x=T ON OFF KENWOOD TO INCREASE THE LEVEL OF THE SELECTED BAND Move the Graphic equalizer knob of the band you wish to adjust in the up- ward direction. (The level of the frequency band cor- responding to the moved knob in- creases.) MAX. :+12dB M . 0 TO DECREASE THE LEVEL OF THE SELECTED BAND Move the Graphic equalizer knob of the band you wish to adjust in the downward direction. (The level of the frequency band cor- responding to the moved knob decreases.) —1 MAX. : - 12dB a V — (En) 5 LEVEL METER 6 (En) FADER ADJUSTMENT ■ When you wish to emphasize the sound from the front speakers Rotate the Fader controller to the left. ■ When you wish to emphasize the sound from the rear speakers Rotate the Fader controller to the right. • Only with the 4-speaker system, the Fader operates. • The preout becomes sound at the rear side. ACCESSORY AND INSTALL MANNER ■ INSTALL MANNER 1. Before installation and wiring, remove the ( - ) terminal of the battery to prevent shortcir-cuiting. 2. Connect the input and output cords of the system. 3. Connect the ground to the metal chassis of the car. 4. Connect the back-up power supply lead (yellow). 5. Install the set and after confirming the installation and wirings are correct, connect the (-) terminal of the battery. • If a fuse is blown, first check that the associated wires are not short-circuited, then replace the fuse with a new one having the same capacity. INSTALLATION When installing in the car, choose the best position with regard to overall safety of the system and ease of operation. As installation fixtures, use only the accessories supplied. »Installing the unit in the dash panel: Convenient spot on fire wall ► Installing the unit below the dash board: CEnl 9 CONNECTION —¡POWER CQNT.b • Input sensitivity control The input sensitivity can be adjusted to 0.3 or 5 V through a system to be connected to this switch. If you are going to connect a KENWOOD system to this switch, then, normally use this switch as it is (0.3 V). 0.3 V sv —I I— i_i -Rear left output Rear right output ©Power connection cord (2)Speaker cord When connecting to 4 speakers i~(Green stripe) © Wr'l Front left ■ ©- I speaker I (Gray stripe) r 0 - ] (White stripe) ly- © - , — © — ■ (Purple stripe) © — e — Front right XI I speaker Rear left speaker Ч8ЭК -v-^1 Rear right I speaker !< Battery When connecting to 2 speakers (BTL connection) ("Green striper ~~1 -©- t i (Gray stripe) k=— I * {White stripe) :C -e ■ И Left speaker Right speaker i {Purple stripe] rC Power amplifier (...


Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias