To provide the specified protection in hazardous locations, please note that no compound of any type is to be applied on machined flange. INSTALLATION OF MATCHING TRANSFORMER Atlas Sound Model T-18, 60 Watt line matching transformer is listed by UL and C.S.A. for installation within the explosion-proof driver enclosure. Primary Winding: 2000/1000/500/250/125/85/ (45 Ohms) Secondary Winding: 4, 8 & 16 Ohms Insertion loss: Less than 12dB at 1 kHz Termination: Solder Lugs Shipping Weight: 1.

for installation within the explosion-proof driver enclosure. Primary Winding: 2000/1000/500/250/125/85/ (45 Ohms) Secondary Winding: 4, 8 & 16 Ohms Insertion loss: Less than 12dB at 1 kHz Termination: Solder Lugs Shipping Weight: 1.5 Lbs. Within the explosion-proof housing, on the back side of the magnetic assembly of the drive unit, two holes are pre-drilled for fastening the T-18 line matching transformer with 8-32 screws. When used with the Atlas Sound HLE-Series speakers, the 16 Ohm

for installation within the explosion-proof driver enclosure. Primary Winding: 2000/1000/500/250/125/85/ (45 Ohms) Secondary Winding: 4, 8 & 16 Ohms Insertion loss: Less than 12dB at 1 kHz Termination: Solder Lugs Shipping Weight: 1.5 Lbs. Within the explosion-proof housing, on the back side of the magnetic assembly of the drive unit, two holes are pre-drilled for fastening the T-18 line matching transformer with 8-32 screws. When used with the Atlas Sound HLE-Series speakers, the 16 Ohm

LINE, WATTS 25 V. LINE WATTS 45 - 15.0 85 60.0 7.5 125 40.0 5.0 250 20.0 2.5 500 10.0 - 1000 5.0 - 2000 2.5 - NOTE: C.S.A. reference guide: 386-0-0.8 Class: 2268 Specifications are subject to change without notice 1601 JACK MCKAY BOULEVARD ENNIS, TEXAS U.S.A. ©2001 ATLAS SOUND LP Printed in U.S.A. 00801 TELEPHONE: (800) 876-3332 • ATS000707 RevB 8/01 FAX: (800) 765-3435 PN 316972

Prior to re-assembly, make certain that joining surfaces of enclosure is free of dirt. Tighten all cover bolts completely. To provide the specified protection in hazardous locations, please note that no compound of any type is to be applied on machined flange. INSTALLATION OF MATCHING TRANSFORMER Atlas Sound Model T-18, 60 Watt line matching transformer is listed by UL and C.S.A. for installation within the explosion-proof driver enclosure. Primary Winding: 2000/1000/500/250/125/85/ (45 Ohms)

LINE WATTS 45 - 15.0 85 60.0 7.5 125 40.0 5.0 250 20.0 2.5 500 10.0 - 1000 5.0 - 2000 2.5 - NOTE: C.S.A. reference guide: 386-0-0.8 Class: 2268 Specifications are subject to change without notice 1601 JACK MCKAY BOULEVARD ENNIS, TEXAS U.S.A. ©2001 ATLAS SOUND LP Printed in U.S.A. 00801 TELEPHONE: (800) 876-3332 • ATS000707 RevB 8/01 FAX: (800) 765-3435 PN 316972

OF TERMINALS VT/VTF MODELS WITH 3, 4 OR 5 POSITION TERMINAL STRIP P 3 VT/VTF-22U VT/VTF-22UC VT/VTF-27U VT/VTF-27UC VTB-5 VTB-6 4 VT/VTF-17U VT/VTF-17UC 5 VT/VTF-152U VT/VTF-152UC VT/VTF-157U VT/VTF-157UC VTB-3 VTB-4 SPEAKER #1 SPEAKER #2 Incoming Leads Outgoing Leads to Next Speaker or EOL Resistor VT/VTF-17U VT/VTF-17UC VT/VTF-27U VT/VTF-27UC VTB-5 VT/VTF-22U VT/VTF-22UC VTB-6 VT/VTF-157U VT/VTF-157UC 70 VTB-3 VT/VTF-152U V VT/VTF-152UC VTB-4 70V Line Xfmr Term Color Watt 70V

The transformer is mounted on the surface with a protective shell. Model PsR-212 is larger than Model PSR-206 (see specifications). MODEL PSR-206 PSR-212 INPUT POWER 117VAC, 60 cycles, 12W 117VAC, 60 cycles, 24W OUTPUT POWER 24VDC, 500mA 24VDC, 1 amp RELAYS (NUMBER) 6 12 RELAY TYPE 24VDC,DPDT 24VDC, DPDT RELAY COIL CURRENT Nominal 35mA Nominal 35mA RELAY CONTACT RATING TERMINAL STRIPS 3 amps one point, screw type two 8 point, screw type 3 amps one 10 point, screw type three 8 point, screw

These relays are commonly used in communication applications where selective activation of speakers is needed. Models are designed to be used in conjunction with Atlas Sound's MPC Series (Modular Paging Communications Center) for zone paging in restaurants, reception areas, professional offices, health clubs, production, and customer service departments. Refer to SL5-1419. Relay-pak can be easily converted to accommodate "all page" applications, and have the capacity of adding external relays o

• TELEPHONE: (800) 876-3333 • FAX: (800) 765-3435 ©2006 ATLAS SOUND LP Printed in U.S.A. 00406 ATS002329 RevA 04/06 PP o AARMK2-5 INSTALLATION INSTRUCTIONS Configuration #2 - Mounting one AA35 or PA601 1. Disconnect amplifier from electrical source. 2. Remove the four feet. 3. Remove front two screws from sides of amp. 4. Align and secure the chassis extension plate to a rack ear using the enclosed screws and nuts. 5. Align the rack ear and extension assembly to the chassis holes on the