Log:
Downloads : 0   Arquivo Tamanho: 702 kb   Fabricante : Avanti  
Categoria : receptor e amplificador
@name

23). REMOVABLE STORAGE DRAWER The drawer (fig. 24) comes out like a normal drawer. To remove the drawer open and lift it. Do not store flammable material in the oven or in the bottom drawer. Figure 20 Figure 21 Figure 22 Figure 23 Figure 24 16 CARE & MAINTENANCE REMOVING THE OVEN DOOR Type A To facilitate oven cleaning, it is possible to remove the door. Please follow the instructions carefully: — Open the door completely. — Push down the lever “L" and, keeping it in this positio

Downloads : 0   Arquivo Tamanho: 702 kb   Fabricante : Avanti  
Categoria : receptor e amplificador
@name

Do not cut or remove the grounding prong from the plug. Do not under any circumstances cut or remove the third (ground) prong from the power plug. Electrical installation should comply with national and local codes. REPLACEMENT PARTS Only authorized replacement parts may be used in performing service on the range. Replacement parts are available from factory authorized parts distributors. Contact the nearest AVANTI parts distributor in your area. 8 HOW TO USE THE TOP BURNERS ——i™..... nni

Downloads : 1   Arquivo Tamanho: 702 kb   Fabricante : Avanti  
Categoria : receptor e amplificador
@name

P.O. Box 520604 - Miami, Florida 33152 !\ WARNING • ALL RANGES CAN TIP • INJURY TO PERSON COULD RESULT • INSTALL ANTI-TIP DEVICE PACKED WITH RANGE • SEE INSTALLATION INSTRUCTIONS WARNING: IF THE INFORMATION IN THIS MANUAL IS NOT m FOLLOWED EXACTLY, A FIRE OR EXPLOSION MAY RESULT i CAUSING PROPERTY DAMAGE, PERSONAL INJURY, OR DEATH. / Do not store or use gasoline or other flammable vapors and liquids . in the vicinity, of this or any other appliance;- ✓ WHAT TO DO IF YOU SMELL GAS: : ; •

Downloads : 0   Arquivo Tamanho: 702 kb   Fabricante : Avanti  
Categoria : receptor e amplificador
@name

S In appliances with electric ignition keep the electrode clean so that the sparks always strike. ✓ Note: To avoid damage to the electric ignition do not use it when the burners are not in place. CORRECT REPLACEMENT OF THE BURNERS It is very important to check that the burner flame spreader “F" and the cap “C" have been correctly positioned (see figs. 20 and 21). Failure to do so can cause serious problems. In appliances with electric ignition, check that the electrode “S” (fig. 20) is alwa





categorias