Assessments - 0, GPA: 5
(
)
)
|
Facilidade de uso
- Change the place before starting the engine (at least 3 meters from the place of refuelling) (6). - Fuel cannot be stored for an unlimited period of time. Buy only as much as will be consumed in the near future. - Use only approved and marked containers for the transport and storage of fuel. Ensure children have no access to fuel. Putting into operation . Do not work alone. Another person must be nearby in case of emergencies (within shouting distance). . Children and other persons must remain more than 15 meters (50 feet) from the working area. Keep an eye out for animals as well (7). - Before use always check that the brushcutter is safe for operation: Make sure the cutting tool is securely installed. The throttle must automatically return to the off position when released, and the throttle lever lock must work properly. The cutting tool must not turn during idling. The handles should be clean and dry. The on/off switch must function properly. The guard must be undamaged and securely installed in the correct position. Otherwise you are in danger of injury! - Start the brushcutter only in accordance with the instructions. Do not use any other methods for starting the engine (8)! - Use this brushcutter and its cutting tools only for the uses they are intended for as specified in the documentation. - Start the brushcutter only after complete assembly and inspection. Operation of the device is only permitted after all the appropriate accessories are attached! - The cutting tool must be equipped with its appropriate guard. Never run the cutter without this guard! - The cutting tool must not turn during idling. If necessary adjust the idling speed. - Before starting, make sure that the cutting tool has no contact with hard objects such as branches, stones etc. - The engine must be switched off immediately if there are any noticeable changes in the behavior of the equipment. - Should the cutting tool hit stones or other hard objects, immediately switch off the engine and inspect the cutting tool. - Inspect the cutting tool at frequent intervals for damage (detect hairline cracks by means of tapping - noise test). Hairline cracks can occur in the region of the base of the teeth after long use. Damaged cutting tools and cutting tools with hairline cracks must not be used any longer under any circumstances. - Operate the brushcutter only with the shoulder strap attached, which is to be suitably adjusted before putting the brushcutter into operation. It is essential to adjust the shoulder strap according to the user’s size to prevent fatigue during use. Never hold the cutter with one hand during use. - When working with the brushcutter always hold it with both hands (9). Keep proper footing and balance at all times. - Operate the brushcutter in such a manner as to avoid inhalation of the exhaust gases. Do not start or operate the brushcutter in closed rooms (risk of gas poisoning). Carbon monoxide is an odorless gas. Work only in well-ventilated places. - When taking a break or leaving the brushcutter unattended, turn off the engine (10) and set the brushcutter down in such a way that there is no risk of injury to yourself or others. - Never put the hot brushcutter onto dry grass or onto any combustible materials. - Shut off the engine during transport or when moving on to a new location (10). - Never operate the engine with a faulty exhaust muffler. 3 meters (10 feet) Schematic drawing . Breaks . Transport . Refuelling . Maintenance . Tool Replacement 7 8 9 10 MS-230 C MS-260 C MS-330 C 6 MS-260 U MS-330 U MS-430 U 15 meters (50 feet) kickback During operation the brushcutter can kickback in an uncon trolled manner. This can happen when the cutting blade (4tooth star blade) comes into contact with hard objects such as stumps, fenceposts, tree trunks, woody brush or large rocks. This can fling the brushcutter to one side with great force and speed (injury hazard). To avoid kickback, observe the following: -Remove foreign objects from the cutting area and be aware of plants and objects in the area. -The cutting tool must be turning at full speed before starting cuts. -The danger of kickback is heightened in the darkened area (illustration), especially if using a metal cutting tool! working behavior / Method of working -Use the brushcutter only in good light and visibility. During the winter season beware of slippery or wet areas, ice and snow (risk of slipping). Always ensure a safe footing. -Never cut above your shoulder height. -Never stand on a ladder and run the brushcutter. -Never climb up into trees to perform cutting operations with the brushcutter. -Never work on unstable surfaces. -Make sure the cutting area is free of foreign objects such as stones and metal items. Foreign particles can rebound (danger of injury, 1 ), damage the cutting tool and cause dangerous kickbacks. -Before commencing cutting, the cutting tool must have reached full working speed. applications for cutting tools Employ only the corre...